The conductivity of graphite oxide films is modulated using reducing agents. It is found that the sheet resistance of graphite oxide film reduced using sodium borohydride (NaBH4) is much lower than that of films reduced using hydrazine (N2H4). This is attributed to the formation of CN groups in the N2H4 case, which may act as donors compensating the hole carriers in reduced graphite oxide. In the case of NaBH4 reduction, the interlayer distance is first slightly expanded by the formation of intermediate boron oxide complexes and then contracted by the gradual removal of carbonyl and hydroxyl groups along with the boron oxide complexes. The fabricated conducting film comprising a NaBH4‐reduced graphite oxide reveals a sheet resistance comparable to that of dispersed graphene.

No abstract

Hexagonal boron nitride (h-BN) has received a great deal of attention as a substrate material for high-performance graphene electronics because it has an atomically smooth surface, lattice constant similar to that of graphene, large optical phonon modes, and a large electrical band gap. Herein, we report the largescale synthesis of high-quality h-BN nanosheets in a chemical vapor deposition (CVD) process by controlling the surface morphologies of the copper (Cu) catalysts. It was found that morphology control of the Cu foil is much critical for the formation of the pure h-BN nanosheets as well as the improvement of their crystallinity. For the first time, we demonstrate the performance enhancement of CVDbased graphene devices with large-scale h-BN nanosheets. The mobility of the graphene device on the h-BN nanosheets was increased 3 times compared to that without the h-BN nanosheets. The on−off ratio of the drain current is 2 times higher than that of the graphene device without h-BN. This work suggests that high-quality h-BN nanosheets based on CVD are very promising for high-performance large-area graphene electronics.

Recently, as applications based on triboelectricity have expanded, understanding the triboelectric charging behavior of various materials has become essential. This study investigates the triboelectric charging behaviors of various 2D layered materials, including MoS , MoSe , WS , WSe , graphene, and graphene oxide in a triboelectric series using the concept of a triboelectric nanogenerator, and confirms the position of 2D materials in the triboelectric series. It is also demonstrated that the results are obviously related to the effective work functions. The charging polarity indicates the similar behavior regardless of the synthetic method and film thickness ranging from a few hundred nanometers (for chemically exfoliated and restacked films) to a few nanometers (for chemical vapor deposited films). Further, the triboelectric charging characteristics could be successfully modified via chemical doping. This study provides new insights to utilize 2D materials in triboelectric devices, allowing thin and flexible device fabrication.