The Medical Implant Communications Service (MICS) is an ultra-low power, unlicensed, mobile radio service for transmitting data in support of diagnostic or therapeutic functions associated with implanted medical devices. The US Federal Communications Commission (FCC) allocated 402-405 MHz frequency band for MICS operations on a shared, secondary basis in 1999. Although it is a fairly new standard, its usage is rapidly increasing in medical implant devices such as Cardiac Pacemakers, ImplantableCardioverter Defibrillator, Neurostimulators, Hearing Aids and Automated Drug Delivery Systems. This paper reviews the regulatory standards and the characteristics of MICS transceivers.

Date of publication xxxx 00, 0000, date of current version xxxx 00, 0000.

This work presents a cost-effective multiple-element multiple-input multiple-output (MIMO) antenna system for next-generation smartphones. The proposed antenna system is developed on a 0.8 mm thin FR-4 substrate with a relative permittivity of 4.4, which consists of one main board and two sideboards. The dimensions of the main board and the two side boards are 150 × 75 mm2 and 150 × 6 mm2, respectively. The radiating elements are printed on the sideboards to provide space for other radio frequency (RF) components to be embedded on the main board. The proposed antenna resonates at two distinct allotted 5G bands, i.e., 3.5 GHz and 5.4 GHz, with impedance bandwidths of 200 MHz and 700 MHz, respectively. The isolation between the antenna elements is noted to be >18 dB and >12 dB for the 3.5 GHz and 5.4 GHz frequency bands. In addition, the proposed MIMO antenna provides pattern and spatial diversity characteristics in both bands with good gain and efficiency. Furthermore, the MIMO parameters such as envelope correlation coefficient (ECC), mean effective gain (MEG), and channel capacity (CC) are calculated, and it is observed that the MIMO antenna offers good diversity performance for the bands of interest. A prototype is fabricated and measured to verify the numerical data. The simulated results were discovered to be in excellent agreement with the measured results. It is also observed that the proposed MIMO antenna system holds promising features, and can be utilized for future generations of smartphones.

In this article, we propose a light weight, low profile Multiple Input Multiple Output (MIMO) antenna system for compact 5th Generation (5G) mmwave devices. Using a RO5880 substrate that is incredibly thin, the suggested antenna is made up of circular rings stacked vertically and horizontally on top of one another. The single element antenna board has dimensions of 12 × 12 × 0.254 mm3 while the size of the radiating element is 6 × 2 × 0.254 mm3 (0.56λ0 × 0.19λ0 × 0.02λ0). The proposed antenna showed dual band characteristics. The first resonance showed a bandwidth of 10 GHz with a starting frequency of 23 GHz to an ending frequency point of 33 GHz followed by a second resonance bandwidth of 3.25 GHz ranging from 37.75 to 41 GHz, respectively. The proposed antenna is transformed into a four element Linear array system with size of 48 × 12 × 0.254 mm3 (4.48λ0 × 1.12λ0 × 0.02λ0). The isolation levels at both resonance bands were noted to be >20 dB which shows high levels of isolation among radiating elements. The MIMO parameters such as Envelope Correlation Co-efficient (ECC), Mean Effective Gain (MEG) and Diversity Gain (DG) were derived and were found to be in satisfactory limits. The proposed MIMO system model is fabricated and through validation and testing of the prototype, the results were found to be in good agreement with simulations.

For microwave imaging applications, a design for an ultra-wideband (UWB) fractal antenna is presented. The antenna design is composed of a pentagonal fractal patch radiator fed by a modified co-planar waveguide (CPW) ground plane. It is built on a low-loss Rogers RT/Duroid 5880 dielectric substrate with a dimensions of 24 × 30 × 0.787 mm3. According to the measurements, the designed antenna offers a fractional bandwidth of 123.56% ranging from 3 GHz to 12.7 GHz. In addition, a maximum gain of 3.6 dBi is achieved at 8.5 GHz. From the results, it is also observed that the proposed antenna structure attains constant radiation characteristics in the operating bandwidth, which is useful for microwave imaging applications. The time domain analysis of the proposed design is also performed, and it is observed that the designed antenna offers a group delay of ≤1.5 ns, which ensures minimum pulse distortion.