The current study is focused on the economic and financial assessments of solar and wind power potential for nine selected regions in Libya for the first time. As the existing meteorological data, including wind speed and global solar radiation, are extremely limited due to the civil war in the country, it was therefore decided to use the NASA (National Aeronautics and Space Administration) database as a source of meteorological information to assess the wind and solar potential. The results showed that the country has huge solar energy potential compared to wind energy potential. Additionally, it is found that Al Kufrah is a suitable region for the future installation of the Photovoltaic (PV) power plant due to high annual solar radiation. Based on the actual wind speed analysis, Benghazi and Dernah are the best regions for large-scale wind farm installation in the future taking into account existing meteorological data limitations. The values of the wind power density in all regions are considerable and small-scale wind turbines can be used to generate electricity based on NASA average monthly wind data for 37 years (1982–2019). Moreover, this work aimed to evaluate the wind/PV systems technical and economically through RETScreen Expert (Version 6.0, CanmetENERGY Varennes Research Centre of Natural Resources Canada, Varennes, Canada). Focusing on the power supply crisis in the country, the potential of electricity production by 5 kW grid-connected residential/household rooftop PV in all regions is proposed and presented. Additionally, this paper evaluated a techno-economic analysis of the 50MW wind/PV system in suitable places. The performance of a 5 kW and 50 MW PV solar system with three PV technologies, namely mono-crystalline silicon, poly-crystalline silicon, and thin-film (CdTe), was also analyzed. The results demonstrated that the development of the wind/PV system in the selected regions is both technically and economically feasible. The outcomes of this study can help decision-makers in designing and installing PV power plants as an alternative source for the future.

No abstract

The rising usage of carbon and glass fibers has raised awareness of scrap management options. Every year, tons of composite scrap containing precious carbon and glass fibers accumulate from numerous sectors. It is necessary to recycle them efficiently, without harming the environment. Pyrolysis seems to be a realistic and promising approach, not only for efficient recovery, but also for high-quality fiber production. In this paper, the essential characteristics of the pyrolysis process, their influence on fiber characteristics, and the use of recovered fibers in the creation of a new composite are highlighted. Pyrolysis, like any other recycling process, has several drawbacks, the most problematic of which is the probability of char development on the resultant fiber surface. Due to the char, the mechanical characteristics of the recovered fibers may decrease substantially. Chemically treating and post-heating the fibers both help to reduce char formation, but only to a limited degree. Thus, it was important to identify the material cost reductions that may be achieved using recovered carbon fibers as structural reinforcement, as well as the manufacture of high-value products using recycled carbon fibers on a large scale. Recycled fibers are cheaper than virgin fibers, but they inherently vary from them as well. This has hampered the entry of recycled fiber into the virgin fiber industry. Based on cost and performance, the task of the current study was to modify the material in such a way that virgin fiber was replaced with recycled fiber. In order to successfully modify the recycling process, a regulated optimum temperature and residence duration in post-pyrolysis were advantageous.

This paper presents a techno-economic assessment of the wind power potential for eight locations distributed over the Northern part of Cyprus. The wind speed data were collected from the meteorological department located in Lefkoşa, Northern Cyprus.Ten distribution models were used to analyze the wind speed characteristics and wind energy potential at the selected locations. The maximum-likelihood method was used for calculating the parameters of the distribution functions.The power law model is utilized to determine the mean wind speed at various heights. In addition, the wind power density for each location was estimated. Furthermore, the performances of different small-scale vertical axis 3–10 kW wind turbines were evaluated to find those that were suitable and efficient for power generation in the studied locations.The results showed that the annual mean wind speed in the regions is greater than 2 m/s at a height of 10 m. Moreover, it is indicated that Generalized Extreme Value distribution provided the best fit to the actual data for the regions of Lefkoşa, Ercan, Girne, Güzelyurt, and Dipkarpaz. However, the Log-Logistic, Weibull, and Gamma distributions gave a better fit to the actual data of Gazimağusa, YeniBoğaziçi, and Salamis, respectively. The Rayleigh distribution does not fit the actual data from all regions. Furthermore, the values of wind power densityat the areas studied ranged from 38.76 W/m2 to 134.29 W/m2 at a height of 50 m, which indicated that wind energy sources in these selected locations are classified as poor. Meanwhile, based on the wind analysis, small-scale wind turbine use can be suitable for generating electricity in the studied locations. Consequently, an Aeolos-V2 with a rating of 5 kW was found to be capable of producing the annual energy needs of an average household in Northern Cyprus.

Biodiesel is an attractive alternative fuel for diesel engines produced from vegetable oils or animal fats by transesterification in the presence of a catalyst. The feedstocks used in this experiment for the production of biodiesel were waste frying oil (WFME) waste canola oil (WCME), and their different percentages are referred to as 25-WFME, 50-WFME and 75-WFME. The samples are sourced from Northern Cyprus. Also, biodiesel was produced at Mechanical Engineering research laboratory. The purpose of this study is to investigate the effect of the temperature on the kinematic, dynamic viscosity and density of the biodiesel samples. Also, this paper examines the cold flow properties as well as the kinematic viscosity, cloud point (CP) and pour point (PP) of the produced biodiesel. The density, kinematic viscosity, CP and PP measurements were made according to ASTM standards. The properties of the produced biodiesel such as viscosity and density were measured within temperature ranges 20-270°C in steps of 10°C. The kinematic viscosity, CP and PP were measured within temperature range -10-20°C. In this study, five general correlations were presented for estimating the density and kinematic viscosity of the blends at several temperatures. The experimental investigation showed that CP and PP of WCME increased with an increase in the concentration of WFME. Furthermore, empirical equations for predicting the viscosity, density, CP and PP for biodiesel samples give values in good agreement with experiments. The results obtained show that with the increase of the temperature, kinematic viscosity, dynamic viscosity and density decreased.

Solar power is the fastest-growing energy source in the world. New technologies can help to generate more power from solar energy. The present paper aims to encourage people and the government to develop solar energy-based power projects to achieve sustainable energy infrastructures, especially in developing countries. In addition, this paper presents a solar energy road map to attract investors to invest in clean energy technology to help reduce the effect of global warming and enhance sustainable technological development. Therefore, the first objective of the paper is to analyze and compare the monthly global solar radiation for five different locations in Northern Cyprus using the measured data collected from the Meteorological Department and estimated values collected from the satellite imagery database. In addition, the mean hourly meteorological parameters including global solar radiation, air temperature, sunshine, and relative humidity are analyzed statistically and the type of distribution functions are selected based on skewness and kurtosis values. Accordingly, estimating global solar radiation improves solar power generation planning and reduces the cost of measuring. Therefore, models of a surface were analyzed by means of polynomial adjustments considering the values of R-squared. Finally, this study provides a comprehensive and integrated feasibility analysis of a 100 MW grid-connected solar plant project as an economic project in the selected region to reduce electricity tariffs and greenhouse gas (GHG) emissions. RETScreen Expert software was used to conduct the feasibility analysis in terms of energy production, GHG emissions, and financial parameters for the best location for the installation of a 100 MW grid-connected photovoltaic (PV) plant. Finally, the results concluded that the proposed solar system could be used for power generation in Northern Cyprus.

Lebanon suffers from daily electricity shortages. The country has paid much attention to renewable energy sources, particularly solar, to gradually replace conventional energy. Installing a photovoltaic (PV) system becomes increasingly attractive for residential consumers due to the rising electricity tariff rates while it reduces the dependency on domestic power generators. No known study has dealt with the investigation of potential grid-connected rooftop PV systems with various sun-tracking modes and PV technologies in Nahr El-Bared, Lebanon. Consequently, the main objective of the current paper is to investigate the feasibility of a 5kW grid-connected PV system of various technologies (mono-crystalline silicon and poly-crystalline silicon) and sun-tracking modes including fixed tilt and 2-axis systems for rooftop households in Lebanon. The Nahr El-Bared camp was the case study was of the paper. RETScreen Expert software was used to evaluate the techno-economic performance of the proposed systems. The results show that the annual electrical energy from a fixed 5kW PV panel tilted at an optimal angle ranged from 8564.47kWh to 8776.81kWh, while the annual electrical energy from the PV tracking system was within the range of 11511.67-12100.92kWh. This amount of energy output would contribute significantly to reduce the energy shortage in the country. A typical household was selected to establish a load profile and load supply during both grid availability and outage periods. The highest energy consumption that can be covered by the PV systems was recorded during the spring and summer seasons. Also, the average energy production cost ranged from 0.0239 to 0.0243$/kWh for all the proposed systems. It was concluded that a 5kW grid-connected rooftop PV system could be economically justifiable. Finally, this study tried to increase the awareness about utilizing PV sun-tracking systems and the feasibility of small-scale grid-connected rooftop PV systems in the selected regions. The results of this research can help investors in the energy and building sectors.

Libya is currently interested in utilizing renewable energy technologies to reduce the energy dependence on oil reserves and Greenhouse Gas (GHG) emissions. The objective of this study is to investigate the feasibility of a 10MW grid-connected PV power plant in Libya. NASA data are used to analyze the global horizontal irradiation, direct normal irradiation, and air temperature of 22 selected locations in Libya and to evaluate the potential of solar energy. RETScreen software is used to estimate the energy production, GHG emissions, and financial parameters for the 22 locations. Based on the solar atlas map, it is noticed that the highest global horizontal irradiation is in the southern part of Libya, which ranged from 2100 to 2500kWh/m2. These results indicate that Libya has a huge solar energy potential that can be used to ‎generate electricity. Moreover, based on techno-economic results, it is observed that the highest electricity generation of 22067.13MWh is recorded at Al Κufrah and the lowest at Al Jabal al Akhdar with a value of 17891.38MWh. Furthermore, Al Kufrah and Murzuq are the best locations for the future installation of PV power plants from annual energy and the economic parameters point of view. The maximum value of power that can be generated by the plant was estimated to be 22.06GW.