Sodium is a promising anode material for batteries due to its low standard electrode potential, high abundance and low cost. In this work, we report a new rechargeable ~ 3.5 V sodium ion battery using Na anode, amorphous carbon-nanosphere cathode and a starting electrolyte comprised of AlCl 3 in SOCl 2 with uoride-based additives. The battery, exhibiting ultrahigh ~ 2800 mAh/g rst discharge capacity, could cycle with a high reversible capacity up to ~ 1000 mAh/g. Through battery cycling, the electrolyte evolved to contain NaCl, various sulfur and chlorine species that supported anode's Na/Na + redox and cathode's chloride/chlorine redox. Fluoride-rich additives were important in forming a solid-electrolyte interface, affording reversibility of the Na anode for a new class of high capacity secondary Na battery. Main TextDevising new battery concepts is important to meeting society's growing demand of energy storage.Different rechargeable batteries have been developed, including lithium ion batteries (LIBs), sodium ion batteries (SIBs) and aluminum ion batteries (AIBs) [1][2][3][4][5][6][7][8][9] . Prior to the invention of secondary LIBs, a primary Li-metal battery was developed in the 1970's using thionyl chloride (SOCl 2 ) as a catholyte, Li metal as anode and amorphous carbon as the positive electrode [10][11][12][13][14][15][16] . The Li-SOCl 2 battery was attractive due to its high energy density, but did not receive sustained interest due to the lack of rechargeability 17,18 . The battery discharges through Li anode oxidation and catholyte SOCl 2 reduction into sulfur (S), sulfur dioxide (SO 2 ), and chloride ion (Cl -) on the carbon electrode 19,20 . The Clions react with Li + stripped from
Rechargeable lithium metal batteries are next generation energy storage devices with high energy density, but face challenges in achieving high energy density, high safety, and long cycle life. Here, lithium metal batteries in a novel nonflammable ionic‐liquid (IL) electrolyte composed of 1‐ethyl‐3‐methylimidazolium (EMIm) cations and high‐concentration bis(fluorosulfonyl)imide (FSI) anions, with sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) as a key additive are reported. The Na ion participates in the formation of hybrid passivation interphases and contributes to dendrite‐free Li deposition and reversible cathode electrochemistry. The electrolyte of low viscosity allows practically useful cathode mass loading up to ≈16 mg cm−2. Li anodes paired with lithium cobalt oxide (LiCoO2) and lithium nickel cobalt manganese oxide (LiNi0.8Co0.1Mn0.1O2, NCM 811) cathodes exhibit 99.6–99.9% Coulombic efficiencies, high discharge voltages up to 4.4 V, high specific capacity and energy density up to ≈199 mAh g−1 and ≈765 Wh kg−1 respectively, with impressive cycling performances over up to 1200 cycles. Highly stable passivation interphases formed on both electrodes in the novel IL electrolyte are the key to highly reversible lithium metal batteries, especially for Li–NMC 811 full batteries.
Potassium secondary batteries are contenders of next-generation energy storage devices owing to the much higher abundance of potassium than lithium. However, safety issues and poor cycle life of K metal battery have been key bottlenecks. Here we report an ionic liquid electrolyte comprising 1-ethyl-3-methylimidazolium chloride/AlCl3/KCl/potassium bis(fluorosulfonyl) imide for safe and high-performance batteries. The electrolyte is nonflammable and exhibits a high ionic conductivity of 13.1 mS cm−1 at room temperature. A 3.6-V battery with K anode and Prussian blue/reduced graphene oxide cathode delivers a high energy and power density of 381 and 1,350 W kg−1, respectively. The battery shows an excellent cycling stability over 820 cycles, retaining ∼89% of the original capacity with high Coulombic efficiencies of ∼99.9%. High cyclability is also achieved at elevated temperatures up to 60 °C. Uniquely, robust K, Al, F, and Cl-containing passivating interphases are afforded with this electrolyte, which is key to superior battery cycling performances.
Microporous carbon spheres (MCSs) fabricated using the extended Stober method have unique features, such as a narrow particle size distribution and a variety of applications. Here, we report the synthesis of nanosized MCSs using a modified version of the extended Stober method at an ambient condition, which is a simple, quick, and scalable process. The activation of nanosized MCSs using CO 2 is conducted to increase the surface area of MCSs. The activated microporous carbon nanospheres (AMCNSs) have a specific surface area of 3259 m 2 /g and a mean diameter of about 52 nm. To the best of our knowledge, this is the smallest reported particle size for carbon spheres with a very high specific surface area. In addition, AMCNSs have a hierarchical structure, which is beneficial for mass transport. The AMCNSs are evaluated for application in supercapacitors. The results show that a capacitance of 225 F/g at a current density of 0.5 A/g in a 6 M KOH aqueous electrolyte can be achieved, indicating that AMCNSs have a potential for supercapacitor applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.