Two-dimensional materials with unique physical and chemical properties have recently attracted widespread attention in the field of solar thermal conversion. However, affected by the Fresnel effect, traditional two-dimensional materials such as MXenes, graphene, transition metal disulfide often have relatively significant light reflection losses at the solid–liquid or gas interface. So how to improve the light absorption of the two-dimensional material performance has become a new challenge in photothermal conversion. Here, we use an improved thermal-injection method to uniformly grow Tricopper­(I) Bismuth Sulfide (Cu3BiS3, CBS) on the surface of Ti3C2 nanosheets in a nonaqueous polar solvent environment. A three-dimensional nanoflower-nanosheet structure CBS-Ti3C2 for photothermal conversion has been constructed successfully. Owing to the excellent photothermal performance of Cu3BiS3 in the near-infrared region, the good thermal conductivity of Ti3C2, and the unique porous structure of the composite material, the composite achieves broadband absorption of light (more than 90% in the visible light region, more than 80% in the near-infrared region), which optical model and finite element simulation have theoretically verified. The composite material has obtained higher solar-to-heat conversion performance than similar material systems, and the steady-state temperature can reach 62.3 °C under 1 sun incident light intensity. CBS-Ti3C2 is expected to become a light-absorbing layer material for solar vapor generation devices due to its excellent light-to-heat conversion performance and good material flexibility. It still guarantees a reasonably high steam generation rate (1.32 kg·m–2·h–1) even with a thinner material thickness (0.48 mg·cm–2) and a comprehensive conversion efficiency higher than 90%. Besides, CBS-Ti3C2 also exhibits the characteristics of resisting surface salt accumulation, which is conducive to maintaining the long-lasting photothermal seawater evaporation process. The material’s electronic structure and the charge transfer process of the heterojunction interface have been studied with the first-principles calculation. The high light absorption performance and good thermal conductivity of the composite material are theoretically explained and supported.

No abstract

No abstract

SiO 2 and ZnO inverse structure replicas have been synthesized using butterfly wings as templates. The laser diffraction performance of the SiO 2 inverse structure replica was investigated and it was found that the zero-order light spot split into a matrix pattern when the distance between the screen and the sample was increased. This unique diffraction phenomenon is closely related to the structure of the SiO 2 inverse structure replica. On the other hand, by analyzing the photoluminescence spectrum of the ZnO replica, optical anisotropy in the ultraviolet band was demonstrated for this material.