Organometal trihalide perovskites have been attracting intense attention due to their enthralling optoelectric characteristics. Thus far, most applications focus on polycrystalline perovskite, which however, is overshadowed by single crystal perovskite with superior properties such as low trap density, high mobility, and long carrier diffusion length. In spite of the inherent advantages and significant optoelectronic applications in solar cells and photodetectors, the fabrication of large-area laminar perovskite single crystals is challenging. In this report, an ingenious space-limited inverse temperature crystallization method is first demonstrated to the in situ synthesis of 120 cm large-area CH NH PbBr crystal film on fluorine-doped tin oxide (FTO) glass. Such CH NH PbBr perovskite crystal film is successfully applied to narrowband photodetectors, which enables a broad linear response range of 10 -10 mW cm , 3 dB cutoff frequency (f ) of ≈110 kHz, and high narrow response under low bias -1 V.
Owing to the 3D scaffolds, porous nanosheets, and strong synergistic effect of Mo and W atoms, the Mo–W–P hybrid behaves as an efficient electrocatalyst for the hydrogen evolution reaction.
Quantum dot-sensitized solar cells (QDSCs) have emerged as a promising candidate for next-generation solar cells due to the distinct optoelectronic features of quantum dot (QD) light-harvesting materials, such as high light, thermal, and moisture stability, facilely tunable absorption range, high absorption coefficient, multiple exciton generation possibility, and solution processability as well as their facile fabrication and low-cost availability. In recent years, we have witnessed a dramatic boost in the power conversion efficiency (PCE) of QDSCs from 5% to nearly 13%, which is comparable to other kinds of emerging solar cells. Both the exploration of new QD light-harvesting materials and interface engineering have contributed to this fantastically fast improvement. The outstanding development trend of QDSCs indicates their great potential as a promising candidate for next-generation photovoltaic cells. In this review article, we present a comprehensive overview of the development of QDSCs, including: (1) the fundamental principles, (2) a history of the brief evolution of QDSCs, (3) the key materials in QDSCs, (4) recombination control, and (5) stability issues. Finally, some directions that can further promote the development of QDSCs in the future are proposed to help readers grasp the challenges and opportunities for obtaining high-efficiency QDSCs.
Nowadays, obtaining a thin and large-area perovskite single-crystal (SC) is still challenging. Herein, we report a novel strategy to prepare a laminar MAPbBr SC with a controllable thickness of 16 μm and a size of 6 × 8 mm. Additionally, the SC solar cell achieves an intriguing efficiency of 7.11% with an impressive stability, maintaining 93% initial PCE after aging for 1000 h.
Dimension engineering is developed to form 2D BA2CsPb2I7 by introducing a bulky ammonium cation, which exhibits superior structural and compositional stability.
Hierarchical anatase TiO2 nano-architecture arrays consisting of long TiO2 nanowire trunk and numerous short TiO2 nanorod branches on transparent conductive fluorine-doped tin oxide glass are successfully synthesized for the first time through a facile one-step hydrothermal route without any surfactant and template. Dye-sensitized solar cells based on the hierarchical anatase TiO2 nano-architecture array photoelectrode of 18 μm in length shows a power conversion efficiency of 7.34% because of its higher specific surface area for adsorbing more dye molecules and superior light scattering capacity for boosting the light-harvesting efficiency. The present photovoltaic performance is the highest value for the reported TiO2 nanowires array photoelectrode.
Mixed cation formamidinium–methylammonium perovskite alloy single crystal outstrips the sole cation single crystal in both long-term stability and optoelectronic properties.
An unprecedented attempt was conducted on suitably functionalized integration of three-dimensional hyperbranched titania architectures for efficient multistack photoanode, constructed via layer-by-layer assembly of hyperbranched hierarchical tree-like titania nanowires (underlayer), branched hierarchical rambutan-like titania hollow submicrometer-sized spheres (intermediate layer), and hyperbranched hierarchical urchin-like titania micrometer-sized spheres (top layer). Owing to favorable charge-collection, superior light harvesting efficiency and extended electron lifetime, the multilayered TiO2-based devices showed greater J(sc) and V(oc) than those of a conventional TiO2 nanoparticle (TNP), and an overall power conversion efficiency of 11.01% (J(sc) = 18.53 mA cm(-2); V(oc) = 827 mV and FF = 0.72) was attained, which remarkably outperformed that of a TNP-based reference cell (η = 7.62%) with a similar film thickness. Meanwhile, the facile and operable film-fabricating technique (hydrothermal and drop-casting) provides a promising scheme and great simplicity for high performance/cost ratio photovoltaic device processability in a sustainable way.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.