Water purification by solar distillation is considered a promising technology for producing clean water from undrinkable water resources. A solar steam generator is a central part of a solar distillation process to separate water and contaminants. Here, we report an efficient and sustainable hierarchical solar steam generator (HSSG) with reduced vaporization enthalpy based on bacterial cellulose (BC) nanocomposites. The nanomaterials are assembled with BC nanofibers produced by bacteria in situ to form nanocomposites. Using this method, we construct functional BC nanocomposites inside and on the natural porous structure of wood. Our HSSG integrates solar-to-vapor efficiency improvement and vaporization enthalpy reduction by integrating the hierarchical multifunctional BC nanocomposites with the natural porous structure of wood. Because of the biomimetic design, hierarchical structure and reduced vaporization enthalpy of HSSG, a high evaporation rate of 2.9 kg m–2 h–1 and solar-to-vapor efficiency of 80% is achieved.
Petroleum-based plastics are useful but they pose a great threat to the environment and human health. It is highly desirable yet challenging to develop sustainable structural materials with excellent mechanical and thermal properties for plastic replacement. Here, inspired by nacre’s multiscale architecture, we report a simple and efficient so called “directional deforming assembly” method to manufacture high-performance structural materials with a unique combination of high strength (281 MPa), high toughness (11.5 MPa m1/2), high stiffness (20 GPa), low coefficient of thermal expansion (7 × 10−6 K−1) and good thermal stability. Based on all-natural raw materials (cellulose nanofiber and mica microplatelet), the bioinspired structural material possesses better mechanical and thermal properties than petroleum-based plastics, making it a high-performance and eco-friendly alternative structural material to substitute plastics.
Sustainable structural materials with light weight, great thermal dimensional stability, and superb mechanical properties are vitally important for engineering application, but the intrinsic conflict among some material properties (e.g., strength and toughness) makes it challenging to realize these performance indexes at the same time under wide service conditions. Here, we report a robust and feasible strategy to process cellulose nanofiber (CNF) into a high-performance sustainable bulk structural material with low density, excellent strength and toughness, and great thermal dimensional stability. The obtained cellulose nanofiber plate (CNFP) has high specific strength [~198 MPa/(Mg m−3)], high specific impact toughness [~67 kJ m−2/(Mg m−3)], and low thermal expansion coefficient (<5 × 10−6 K−1), which shows distinct and superior properties to typical polymers, metals, and ceramics, making it a low-cost, high-performance, and environmental-friendly alternative for engineering requirement, especially for aerospace applications.
Undoubtedly humidity is a non-negligible and sensitive problem for cellulose, which is usually regarded as one disadvantage to cellulose-based materials because of the uncontrolled deformation and mechanical decline. But the lack of an in-depth understanding of the interfacial behavior of nanocellulose in particular makes it challenging to maintain anticipated performance for cellulose-based materials under varied relative humidity (RH). Starting from multiscale mechanics, we herein carry out first-principles calculations and large-scale molecular dynamics simulations to demonstrate the humidity-mediated interface in hierarchical cellulose nanocrystals (CNCs) and associated deformation modes. More intriguingly, the simulations and subsequent experiments reveal that water molecules (moisture) as the interfacial media can strengthen and toughen nanocellulose simultaneously within a suitable range of RH. From the perspective of interfacial design in materials, the anomalous mechanical behavior of nanocellulose with humidity-mediated interfaces indicates that flexible hydrogen bonds (HBs) play a pivotal role in the interfacial sliding. The difference between CNC−CNC HBs and CNC−water−CNC HBs triggers the humidity-mediated interfacial slipping in nanocellulose, resulting in the arising of a pronounced strain hardening stage and the suppression of strain localization during uniaxial tension. This inelastic deformation of nanocellulose with humidity-mediated interfaces is similar to the Velcro-like behavior of a wet wood cell wall. Our investigations give evidence that the humidity-mediated interface can promote the mechanical enhancement of nanocellulose, which would provide a promising strategy for the bottom-up design of cellulose-based materials with tailored mechanical properties.
Hydrogel materials with high water content and good biocompatibility are drawing more and more attention now, especially for biomedical use. However, it still remains a challenge to construct hydrogel fibers with enough strength and toughness for practical applications. Herein, we report a bio-inspired lotus-fibermimetic spiral structure hydrogel bacterial cellulose fiber with high strength, high toughness, high stretchability, and energy dissipation, named biomimetic hydrogel fiber (BHF). The spiral-like structure endows BHF with excellent stretchability through plastic deformation and local failure, assisted by the breaking−reforming nature of the hydrogen bonding network among cellulose nanofibers. With the high strength, high stretchability, high energy dissipation, high hydrophilicity, porous structure, and excellent biocompatibility, BHF is a promising hydrogel fiber for biomedicine. The outstanding stretchability and energy dissipation of BHF allow it to absorb energy from the tissue deformation around a wound and effectively protect the wound from rupture, which makes BHF an ideal surgical suture.
Hydrogel materials have many excellent properties and a wide range of applications. Recently, a new type of hydrogel has emerged: cellulose nanofiber (CNF)-based hydrogels, which have three-dimensional nanofiber networks and unique physical properties. Because CNFs are abundant, renewable, and biodegradable, they are green and eco-friendly nanoscale building blocks. In addition, CNF-based hydrogel materials exhibit excellent mechanical properties and designable functions by different preparation methods and structure designs, demonstrating huge development potential. In this Perspective, we summarize the recent progress in the development of CNF-based hydrogels and introduce their applications in elastic hydrogels, ionic conduction, water purification, and biomedicine, highlighting future trends and opportunities for the further development of CNF-based hydrogels as emerging materials systems.
Electromagnetic interference (EMI) shielding materials with excellent EMI shielding efficiency (SE), lightweight property, and superb mechanical performance are vitally important for modern society, but it is still a challenge to realize these performances simultaneously on one material. Here, we report a sustainable bioinspired double-network structural material with excellent specific strength (146 MPa g–1 cm3) and remarkable EMI SE (100 dB) from cellulose nanofiber (CNF) and carbon nanotubes (CNTs), which demonstrates remarkable and outstanding performance to both typical metal materials and reported polymer composites. In particular, the bioinspired double-network structure design simultaneously achieves an extremely high electrical conductivity and mechanical strength, which makes it a lightweight, high shielding efficiency, and sustainable structural material for real-life electromagnetic wave shielding applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.