We have measured the extreme-ultraviolet (EUV) efficiency of a polymer-overcoated blazed ion-etched holographic test grating. The grating had a magnetron-sputtered Mo2C/Si multilayer coating matched to the grating blaze angle of 2.78 degrees. At an angle of incidence of 5.6 degrees and a wavelength of 15.79 nm, the measured efficiency peaks in the second outside order at 29.9%. The derived groove efficiency is 53.0%. To the best of our knowledge these are the highest values obtained yet at EUV wavelengths from a holographic ion-etched blazed grating.

No abstract

We have measured the topography and near-normal incidence EUV efficiency of five flat multilayer-coated polymerovercoated blazed ion-etched holographic test gratings. Blaze angles were in the range 2.0-4.1º. All gratings had a surface roughness <3 Å rms (20-4000 Å). The best grating had a measured efficiency of 29.9% in the second order at 157.9 Å and a derived groove efficiency of 53.0%. At the shortest wavelength investigated (100.0 Å) another grating produced a measured efficiency in the first order of 12.9% and a derived groove efficiency of 33.6%. In third order another grating produced a measured efficiency at 137.8 Å of 13.4% and a derived groove efficiency of 21.8%. To the best of our knowledge these values exceed previous published results. Some issues remain that may be associated with modification of the groove profile by the multilayer coating.