Particles are often electrostatically charged by frictional contact during powder-handling operations. This phenomenon is called 'triboelectric charging' or 'contact electrification'. The charged particles cause problems such as particle deposition and adhesion. In addition, if particles are excessively charged, an electrostatic discharge may occur, which can pose a risk of fire and explosion hazards; thus, to mitigate the adverse effects, it is important to elucidate the underlying triboelectric charging mechanisms. The electrostatics is, on the other hand, very useful in a number of applications that have been developed using the principles. In this review, the basic concepts and theories of charge transfer between solid surfaces are summarized, and chemical factors depending on materials and environmental effects are described. To theoretically analyze the process of particle charging, relevant models are discussed. Using the models, particle charging by repeated impacts on a wall is formulated. To experimentally evaluate particle charging, measurement and characterization methods are outlined. Furthermore, important applications and computer simulations are described.

A dinuclear complex, [(CoTPA)2(DHBQ)](PF6)3, has been successfully synthesized that exhibits a valence tautomeric transition with a distinct hysteresis effect (13 K) around room temperature and photoinduced valence tautomerism under low temperature.

Pharmaceutical powders are very prone to electrostatic charging by colliding and sliding contacts with walls and other particles. In pharmaceutical formulation processes, particle charging is often a nuisance and can cause problems in the manufacture of products, such as affecting powder flow, and reducing fill and dose uniformity. For a fundamental understanding of the powder triboelectrification, it is essential to study charge transfer due to a single contact of a particle with a target plane under well-defined physical, mechanical and electrical conditions. In this study, charge transfer due to a single impact of a particle against a stainless steel target was measured for alpha-lactose monohydrate, aspirin, sugar granules and ethylcellulose. The amount of transferred charge is expressed as a function of impact velocity and impact angle as well as the initial charge. The maximum contact area during impact between a particle and a target plane is estimated by an elastic-plastic deformation model. It is found that the transferred charge is a linear function of the contact area. For a given material, there is an initial particle charge for which no charge transfer occurs due to impact. This is found to be independent of impact velocity and angle, and is hence viewed as a characteristic property, which is related to the contact potential difference and tribo-electric series of the sample powders.

No abstract