Since the approval of the first phase of Fast Ignition Realization Experiment (FIREX-I), we have devoted our efforts on designing advanced targets and constructing the world highest-energy Peta Watt laser. The new target design has the following features. The coupling efficiency from the heating laser to the thermal energy of the compressed core plasma can be increased by the two ways:1) Low-Z foam layer on the inner surface of the cone for optimum absorption. 2) Double cone. Electrons generated in the inner surface of the double cone will return by sheathe potential generated between two cones. The implosion performance can be improved by three ways: 3) Low-Z plastic layer on the outer surface of the cone may suppress the expansion of the Au cone that flows into the interior of the compressed core. 4) Br doped plastic ablator may significantly moderate the Rayleigh-Taylor instability, making implosion more stable. 5) Evacuation of the target center to prevent gas jets from destroying the cone tip. For project robustness, we also explore 6) impact ignition scheme that eliminates complexity of laser-plasma interaction while keeping the compactness advantage of fast ignition. The fully integrated fast ignition experiment is scheduled on 2009. If subsequent FIREX-II will start as proposed, the ignition and burn will be demonstrated shortly after the ignition at NIF and LMJ, providing a scientific database of both central and fast ignition.

No abstract

No abstract

No abstract

In tropical countries such as Indonesia and Malaysia, the empty fruit bunches are wastes of the oil palm industry. The wastes are abundantly available and has reached a level that severely threats the environment. Therefore, it is a great need to find useful applications of those waste materials; but firstly, the mechanical properties of the EFB fiber should be quantified. In this work, a small tensile test machine is manufactured, and the tensile test is performed on the EFB fibers. The results show that the strength of the EFB fiber is strongly affected by the fiber diameter; however, the fiber strength is relatively low in comparison to other natural fibers.

Gold nanoparticles were supported by a phloroglucinolcarboxylic acid-formaldehyde (PF) gel, a new organic gel with a 30 nm spheroid-like structure. The surface area of the PF gel with gold nanoparticles was 550 m(2)/g. Gold nanoparticles supported on a PF gel exhibited catalytic activity in the reduction of 4-nitrophenol with a reaction rate constant of 7.4 x 10(-3) s(-1), which is high in the reported heterogeneous reaction system. The adsorption behavior of 4-nitrophenol into the gel support was observed by ultraviolet-visible absorption spectroscopy. Gold nanoparticles in the PF network were characterized by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy observation. The high reduction rate would be attributed to the extraction and diffusion of the reactant through the pores of a PF gel support to encounter the highly dispersed gold nanoparticles on the surface and inside the material.

Based on the successful result of fast heating of a shell target with a cone for heating beam injection at Osaka University in 2002 using the PW laser (Kodama et al 2002 Nature 418 933), the FIREX-1 project was started in 2004. Its goal is to demonstrate fuel heating up to 5 keV using an upgraded heating laser beam. For this purpose, the LFEX laser, which can deliver an energy up to10 kJ in a 0.5-20 ps pulse at its full spec, has been constructed in addition to the Gekko-XII laser system at the Institute of Laser Engineering, Osaka University. It has been activated and became operational since 2009. Following the previous experiment with the PW laser, upgraded integrated experiments of fast ignition have been started using the LFEX laser with an energy up to 1 kJ in 2009 and 2 kJ in 2010 in a 1-5 ps 1.053 µm pulse. Experimental results including implosion of the shell target by Gekko-XII, heating of the imploded fuel core by LFEX laser injection, and increase of the neutron yield due to fast heating compared with no heating have been achieved. Results in the 2009 experiment indicated that the heating efficiency was 3-5%, much lower than the 20-30% expected from the previous 2002 data. It was attributed to the very hot electrons generated in a long scale length plasma in the cone preformed with a

The development of target fabrication for the Fast Ignition Realization EXperiment (FIREX) Project is described in this paper. For the first stage of the FIREX Project (FIREX-I), the previously designed target has been modified by using a bromine-doped ablator and coating the inner gold cone with a low-density material. A high-quality bromine-doped capsule without vacuoles was fabricated from bromine-doped deuterated polystyrene. The gold surface was coated with a low-density material by electrochemical plating. For the cryogenic fuel target, a brand new type of aerogel material, phloroglucinol/formaldehyde (PF), was investigated and encapsulated to meet the specifications of 500 µm diameter and 20 µm thickness, with 30 nm nanopores. Polystyrene-based low-density materials were investigated and the relationship between the crosslinker content and the nanopore structure was observed.