No abstract

In this paper, the authors discuss one- and three-dimensional space charge distributions in glass fibre/epoxy resin composites. By the conventional pulsed electroacoustic (PEA) method, only a one-dimensional distribution of the average charge over a whole area parallel to the two electrodes can be observed. Therefore, the authors have developed a new PEA system capable of measuring a three-dimensional space charge distribution. Using this system, they measured the charge distribution in glass fibre/epoxy resin composites made of lattice-woven glass fibre and epoxy resin. It has become clear that spatial variation in signal intensity observed depends on the internal structure of the composite. There appear repetitious positions where a high charge density is observed on the same lateral cross section along the vertical direction in the composite. Such positions are consistent with the intersections of the glass fibres. Accumulation of mobile charge carriers or appearance of polarization charge due to mismatch of the ratio of the conductivity and permittivity between the glass fibre and the epoxy resin is thought to be responsible for the PEA signals.

The properties of bulk insulation in printed circuit boards (PCBs) have become even more important, especially for those with a multilayered or embedded structure. In particular, the spatial distribution of internal charge carriers, mainly due to ionic impurities, is thought to affect the reliability of bulk insulation. Therefore, the effects of humidity and temperature on space charge distribution profiles in a five-layered composite of aramid paper and epoxy resin are studied in this paper. More charge carriers are induced at higher temperatures with humidity. A relative humidity of 55 00 is high enough to induce a saturated amount of charge carriers in the present samples at 40°C.

No abstract

No abstract

No abstract

No abstract

No abstract