We present a novel approach to the fabrication of advanced polymeric nanocomposites from poly(vinyl alcohol) (PVA) by incorporation of PVA-grafted graphene oxide. In this work, we have synthesized PVA-grafted graphene oxide (PVA-g-GO) for the strong interfacial adhesion of graphene oxide (GO) to the PVA matrix. It was found that the mechanical properties of PVA were greatly improved by incorporating PVA-g-GO. For example, the tensile strength and Young's modulus of the PVA nanocomposite films containing 1 wt % net GO in the PVA-g-GO significantly increased by 88 and 150%, respectively, as compared to unfilled PVA. The elongation at break was also increased by 22%, whereas the GO/PVA nanocomposite containing 1 wt % pristine GO was decreased by 15%. Therefore, the presence of the PVA-g-GO in the PVA matrix could make the PVA not only stronger but also tougher. The strong interfacial adhesion between PVA-g-GO and the PVA matrix was attributed to the good compatibility between PVA-g-GO and the matrix PVA as well as the hydrogen-bonding between them.

Carbon nanomaterials such as multiwalled carbon nanotubes (MWCNTs) and graphene oxide (GO) have been functionalized by highly hydrophilic and biocompatible poly(vinyl alcohol) (PVA) for loading and delivery of an anticancer drug, camptothecin (CPT). For the first time, CPT was loaded onto MWCNT-PVA and GO-PVA through π-π interactions and its capability to kill human breast and skin cancer cells was investigated.

A novel approach to chemically functionalize multiwalled carbon nanotubes (MWCNTs) for making advanced polymeric nanocomposites with liquid crystalline polymers (LCPs) is presented. In this approach, two types of chemical moieties (i.e., carboxylic and hydroxyl benzoic acid groups) are selectively introduced onto the sidewalls of the MWCNTs. Fourier transform IR and Raman spectroscopy are used to examine the interaction between the functionalized MWCNTs and the LCP. The strong interaction between the functionalized MWCNTs and the LCP greatly improved the dispersion of MWCNTs in the polymer matrix as well as the interfacial adhesion. The dispersion of the MWCNTs in the LCP matrix is observed by optical microscopy and field‐emission scanning electron microscopy. As a result, the addition of 1 wt% MWCNTs in the LCP resulted in the significant improvement (41 and 55%) in the tensile strength and modulus of the LCP.

No abstract

Multi-walled carbon nanotube (MWCNT)/polypropylene (PP) composites were prepared by a micro melt mixing process. As-prepared composites had relatively low electrical conductivity due to the disruption of MWCNT network by strong shear. The electrical conductivity jumped to high values throughout an annealing process above the melting temperature of PP. The significant enhancement of electrical conductivity was influenced by annealing time, temperature, and content of MWCNTs. In particular, molecular weight of PP played an important role in affecting the conductivity enhancement. The molecular weight of PP was varied from 190,000 to 340,000 to examine its effect on the electrical conductivity. By comparing the conductivity enhancement behavior of composites with different molecular weight PPs and observing the morphology evolution during annealing, it was found that reaggregation of MWCNTs and the subsequent formation of MWCNT network during annealing are the main reasons for the jump of electrical conductivity.

This article introduces a newly innovative idea for preparation of superconductive ternary polymeric composites of polyamide 6 (PA6), conductive carbon black (CCB), and multiwalled carbon nanotubes (MWCNTs) with different weight ratios by a melt‐mixing technique. The complementary effects of CCB and MWCNTs at different compositions on rheological, physical, morphological, thermal, and dynamic mechanical and electrical properties of the ternary composites have been examined systematically. We have used a novel formulation to produce high‐weight fraction ternary polymer composites that show extremely higher conductivity when compared with their corresponding binary polymer composites at the same carbon loading. For example, with an addition of 10 wt % MWCNTs into the CCB/PA6 composite preloaded with 10 wt % CCB, the electrical conductivity of these ternary composites was about 5 S/m, which was 10 times that of the CCB/PA6 binary composite (0.5 S/m) and 125 times that of the MWCNT/PA6 binary composite (0.04 S/m) at 20 wt % carbon loading. The incorporation of the MWCNTs effectively enhanced the thermal stability and crystallization of the PA6 matrix in the CCB/PA6 composites through heterogeneous nucleation. The MWCNTs appeared to significantly affect the mechanical and rheological properties of the PA6 in the CCB/PA6 composites, a way notably dependent on the MWCNT contents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1203–1212, 2010

No abstract

The effects of different surfactants on the properties of multiwalled carbon nanotubes/polypropylene (MWCNT/PP) nanocomposites prepared by a melt mixing method have been investigated. Sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (NaDDBS) were used as a means of noncovalent functionalization of MWCNTs to help them to be dispersed uniformly into the PP matrix. The effects of these surfactant-treated MWCNTs on morphological, rheological, thermal, crystalline, mechanical, and electrical properties of MWCNT/PP composites were studied using field emission scanning electron microscopy, optical microscopy, rheometry, tensile, and electrical conductivity tests. It was found that the surfactant-treatment and micromixing resulted in a great improvement in the state of dispersion of MWCNTs in the polymer matrix, leading to a significant enhancement of Young's modulus and tensile strength of the composites. For example, with the addition of only 2 wt % of SDS-treated and NaDDBStreated MWCNTs, the Young's modulus of PP increased by 61.1 and 86.1%, respectively.