No abstract

A detailed chemical kinetic mechanism has been developed and used to study the oxidation of iso-octane in a jet-stirred reactor, flow reactors, shock tubes and in a motored engine. Over the series of experiments investigated, the initial pressure ranged from 1 to 45 atm, the temperature from 550 K to 1700 K, the equivalence ratio from 0.3 to 1.5, with nitrogen-argon dilution from 70% to 99%. This range of physical conditions, together with the measurements of ignition delay time and concentrations, provide a broad-ranging test of the chemical kinetic mechanism. This mechanism was based on our previous modeling of alkane combustion and, in particular, on our study of the oxidation of n-heptane. Experimental results of ignition behind reflected shock waves were used to develop and validate the predictive capability of the reaction mechanism at both low and high temperatures. Moreover, species' concentrations from flow reactors and a jet-stirred reactor were used to help complement and refine the low and intermediate temperature portions of the reaction mechanism, leading to good predictions of intermediate products in most cases. In addition, a sensitivity analysis was performed for each of the combustion environments in an attempt to identify the most important reactions under the relevant conditions of study.

A detailed chemical kinetic mechanism has been developed to describe the oxidation of small hydrocarbon and oxygenated hydrocarbon species. The reactivity of these small fuels and intermediates is of critical importance in understanding and accurately describing the combustion characteristics, such as ignition delay time, flame speed, and emissions of practical fuels. The chosen rate expressions have been assembled through critical evaluation of the literature, with minimum optimization performed. The mechanism has been validated over a wide range of initial conditions and experimental devices, including flow reactor, shock tube, jet‐stirred reactor, and flame studies. The current mechanism contains accurate kinetic descriptions for saturated and unsaturated hydrocarbons, namely methane, ethane, ethylene, and acetylene, and oxygenated species; formaldehyde, methanol, acetaldehyde, and ethanol.

No abstract

No abstract

A detailed kinetic mechanism has been developed to simulate the combustion of H 2 /O 2 mixtures, over a wide range of temperatures, pressures, and equivalence ratios. Over the series of experiments numerically investigated, the temperature ranged from 298 to 2700 K, the pressure from 0.05 to 87 atm, and the equivalence ratios from 0.2 to 6.Ignition delay times, flame speeds, and species composition data provide for a stringent test of the chemical kinetic mechanism, all of which are simulated in the current study with varying success. A sensitivity analysis was carried out to determine which reactions were dominating the H 2 /O 2 system at particular conditions of pressure, temperature, and fuel/oxygen/diluent ratios. Overall, good agreement was observed between the model and the wide range of experiments simulated. C

No abstract

The oxidation of syngas mixtures was investigated experimentally and simulated with an updated chemical kinetic model. Ignition delay times for H 2 /CO/O 2 /N 2 /Ar mixtures have been measured using two rapid compression machines (RCM) and shock tubes at pressures from 1 to 70 bar, over a temperature range of 914-2220 K and at equivalence ratios from 0.1 to 4.0. Results show a strong dependence of ignition times on temperature and