A detailed chemical kinetic mechanism has been developed to describe the oxidation of small hydrocarbon and oxygenated hydrocarbon species. The reactivity of these small fuels and intermediates is of critical importance in understanding and accurately describing the combustion characteristics, such as ignition delay time, flame speed, and emissions of practical fuels. The chosen rate expressions have been assembled through critical evaluation of the literature, with minimum optimization performed. The mechanism has been validated over a wide range of initial conditions and experimental devices, including flow reactor, shock tube, jet‐stirred reactor, and flame studies. The current mechanism contains accurate kinetic descriptions for saturated and unsaturated hydrocarbons, namely methane, ethane, ethylene, and acetylene, and oxygenated species; formaldehyde, methanol, acetaldehyde, and ethanol.
The oxidation of syngas mixtures was investigated experimentally and simulated with an updated chemical kinetic model. Ignition delay times for H 2 /CO/O 2 /N 2 /Ar mixtures have been measured using two rapid compression machines (RCM) and shock tubes at pressures from 1 to 70 bar, over a temperature range of 914-2220 K and at equivalence ratios from 0.1 to 4.0. Results show a strong dependence of ignition times on temperature and
The development of accurate chemical kinetic models capable of predicting the combustion of methane and dimethyl ether in common combustion environments such as compression ignition engines and gas turbines is important as it provides valuable data and understanding of these fuels under conditions that are difficult and expensive to study in the real combustors. In this work, both experimental and chemical kinetic model-predicted ignition delay time data are provided covering a range of conditions relevant to gas turbine environments (T = 600 − 1600 K, p = 7 − 41 atm, φ = 0.3, 0.5, 1.0, and 2.0 in 'air' mixtures). The detailed chemical kinetic model (Mech 56.54) is capable of accurately predicting this wide range of data, and it is the first mechanism to incorporate high-level rate constant measurements and calculations where available for the reactions of DME. This mechanism is also the first to apply a pressure-dependent treatment to the low-temperature reactions of DME. It has been validated using available literature data including flow reactor, jet-stirred reactor, shock-tube ignition delay times, shock-tube speciation, flame speed, and flame speciation data. New ignition delay time measurements are presented for methane, dimethyl ether, and their mixtures; these data were obtained using three different shock tubes and a rapid compression machine. In addition to the DME/CH 4 blends, high-pressure data for pure DME and pure methane were also obtained. Where possible, the new * address:
The pyrolytic and oxidative behaviour of the biofuel 2,5-dimethylfuran (25DMF) has been studied in a range of experimental facilities in order to investigate the relatively unexplored combustion chemistry of the title species and to provide combustor relevant experimental data. The pyrolysis of 25DMF has been re-investigated in a shock tube using the single-pulse method for mixtures of 3% 25DMF in argon, at temperatures from 1200-1350 K, pressures from 2-2.5 atm and residence times of approximately 2 ms.Ignition delay times for mixtures of 0.75% 25DMF in argon have been measured at atmospheric pressure, temperatures of 1350-1800 K at equivalence ratios (ϕ) of 0.5, 1.0 and 2.0 along with auto-ignition measurements for stoichiometric fuel in air mixtures of 25DMF at 20 and 80 bar, from 820-1210 K. This is supplemented with an oxidative speciation study of 25DMF in a jet-stirred reactor (JSR) from 770-1220 K, at 10.0 atm, residence times of 0.7 s and at ϕ = 0.5, 1.0 and 2.0.Laminar burning velocities for 25DMF-air mixtures have been measured using the heat-flux method at unburnt gas temperatures of 298 and 358 K, at atmospheric pressure from ϕ = 0.6-1.6. * address: Combustion Chemistry Centre, National University of Ireland, Galway, University Road Galway, Ireland. Phone: +353-91-494087. k.somers1@nuigalway.ie, URL: http://c3.nuigalway.ie/ (Kieran P. Somers).. Electronic Supplementary Information Electronic supplementary information includes:• Tabulations of all new experimental data • Pressure-time profiles for high pressure shock tube experiments and volume-time profiles used for corresponding simulations• A description of the optimized group additivity rules for substituted furans •The chemkin format kinetic mechanism, thermodynamic and transport files• A list of species structures and names for interpretation of kinetic mechanism and sensitivity analysis diagrams These laminar burning velocity measurements highlight inconsistencies in the current literature data and provide a validation target for kinetic mechanisms.A detailed chemical kinetic mechanism containing 2768 reactions and 545 species has been simultaneously developed to describe the combustion of 25DMF under the experimental conditions described above. Numerical modelling results based on the mechanism can accurately reproduce the majority of experimental data. At high temperatures, a hydrogen atom transfer reaction is found to be the dominant unimolecular decomposition pathway of 25DMF. The reactions of hydrogen atom with the fuel are also found to be important in predicting pyrolysis and ignition delay time experiments.Numerous proposals are made on the mechanism and kinetics of the previously unexplored intermediate temperature combustion pathways of 25DMF. Hydroxyl radical addition to the furan ring is highlighted as an important fuel consuming reaction, leading to the formation of methyl vinyl ketone and acetyl radical. The chemically activated recombination of HȮ 2 or CH 3 Ȯ 2 with the 5-methyl-2-furanylmethyl radical, forming a 5-methy...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.