A well-known and accepted aerosol measurement technique, the scanning mobility particle sizer (SMPS), is applied to characterize colloidally dispersed nanoparticles. To achieve a transfer from dispersed particles to aerosolized particles, a newly developed nebulizer (N) is used that, unlike commonly used atomizers, produces significantly smaller droplets and therefore reduces the problem of the formation of residual particles. The capabilities of this new instrument combination (N + SMPS) for the analysis of dispersions were investigated, using three different dispersions, i.e. gold-PVP nanoparticles ($20 nm), silver-PVP nanoparticles ($70 nm) and their 1 : 1 (m : m) mixture. The results are compared to scanning electron microscopy (SEM) measurements and two frequently applied techniques for characterizing colloidal systems: Dynamic light scattering (DLS) and analytical disc centrifugation (ADC). The differences, advantages and disadvantages of each method are discussed, especially with respect to the size resolution of the techniques and their ability to distinguish the particle sizes of the mixed dispersion. While DLS is, as expected, unable to resolve the binary dispersion, SEM, ADC and SMPS are able to give quantitative information on the two particle sizes. However, while the high-resolving ADC is limited due to the dependency on a predefined density of the investigated system, the transfer of dispersed particles into an aerosol and subsequent analysis with SMPS are an adequate way to characterize binary systems, independent of the density of concerned particles, but matching the high resolution of the ADC. We show that it is possible to use the well-established aerosol measurement technique (N + SMPS) in colloid science with all its advantages concerning size resolution and accuracy.

Abstract. The German Ultrafine Aerosol Network (GUAN) is a cooperative atmospheric observation network, which aims at improving the scientific understanding of aerosol-related effects in the troposphere. The network addresses research questions dedicated to both climate- and health-related effects. GUAN's core activity has been the continuous collection of tropospheric particle number size distributions and black carbon mass concentrations at 17 observation sites in Germany. These sites cover various environmental settings including urban traffic, urban background, rural background, and Alpine mountains. In association with partner projects, GUAN has implemented a high degree of harmonisation of instrumentation, operating procedures, and data evaluation procedures. The quality of the measurement data is assured by laboratory intercomparisons as well as on-site comparisons with reference instruments. This paper describes the measurement sites, instrumentation, quality assurance, and data evaluation procedures in the network as well as the EBAS repository, where the data sets can be obtained (doi:10.5072/guan).

For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information - such as the amounts of materials handled, protective measures, and measurement strategies - to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended.

No abstract

Manufactured nanomaterials (NMs) are being developed in many different variations such as size, shape, crystalline structure and surface modifications. To avoid the testing of each single nanomaterial variation, grouping and read-across strategies for nanomaterials similar to classical chemicals are discussed. Grouping and read-across aim to identify NM groups with analogous sets of properties or properties that enable reasonable predictions of a NM hazard without additional testing. This will contribute to save costs and time in the risk assessment. So far the knowledge is still limited how modifications of NMs and their properties affect ecotoxicity. This study was initiated to support the discussions on grouping regarding aquatic ecotoxicological effects and for the identification of relevant properties as well as the development of a grouping concept addressing aquatic ecotoxicity. A comprehensive and homogenous data set based on fourteen nanomaterials was established. The selected NMs were modifications of five chemical species (Ag, ZnO, TiO2, CeO2, Cu). As the focus was on the applicability for regulatory purposes, for ecotoxicity the OECD test guidelines 201 (algae), 202 (daphnids) and 236 (fish embryo) were considered. The physico-chemical properties of the chosen NMs were determined in deionized water and the test media applied for the ecotoxicological tests. Reactivity, ion release, morphology and ecotoxicity of the chemical composition (information from the bulk material) were identified as the most relevant grouping properties regarding nanomaterial's ecotoxicity. A grouping scheme and procedure was proposed considering these properties. The scheme was validated with a set of additional nanomaterials (TiO2, SiO2, Fe2O3). A rough, but reliable grouping of NMs with different chemical composition was possible. The separation of NMs with the same chemical composition, into different groups was only feasible, if the NMs show major differences in one of the relevant properties (e.g. different shape). Based on the available data set it is unknown whether either further physico-chemical properties have to be considered or whether the impact of the selected variations on ecotoxicity is too minor to result in significant ecotoxicological differences. In order to further advance the grouping concept for regulatory testing, future developments should include the specification of threshold values with regard to the properties solubility and reactivity as well as for the characterization of the morphology. Additionally, test methods addressing the sorption tendency of NMs to algae could contribute to an improvement of the ecotox-scheme with regard to the consideration of physical effects by shading resulting in limited growth