No abstract

This work presents an investigation of the nonlinear dynamics of carbon nanotubes (CNTs) when actuated by a dc load superimposed to an ac harmonic load. Cantilevered and clamped-clamped CNTs are studied. The carbon nanotube is described by an Euler–Bernoulli beam model that accounts for the geometric nonlinearity and the nonlinear electrostatic force. A reduced-order model based on the Galerkin method is developed and utilized to simulate the static and dynamic responses of the carbon nanotube. The free-vibration problem is solved using both the reduced-order model and by solving directly the coupled in-plane and out-of-plane boundary-value problems governing the motion of the nanotube. Comparison of the results generated by these two methods to published data of a more complicated molecular dynamics model shows good agreement. Dynamic analysis is conducted to explore the nonlinear oscillation of the carbon nanotube near its fundamental natural frequency (primary-resonance) and near one-half, twice, and three times its natural frequency (secondary-resonances). The nonlinear analysis is carried out using a shooting technique to capture periodic orbits combined with the Floquet theory to analyze their stability. The nonlinear resonance frequency of the CNTs is calculated as a function of the ac load. Subharmonic-resonances are found to be activated over a wide range of frequencies, which is a unique property of CNTs. The results show that these resonances can lead to complex nonlinear dynamics phenomena, such as hysteresis, dynamic pull-in, hardening and softening behaviors, and frequency bands with an inevitable escape from a potential well.

We present modeling, analysis and experimental investigation for nonlinear resonances and the dynamic pull-in instability in electrostatically actuated resonators. These phenomena are induced by exciting a microstructure with nonlinear forcing composed of a dc parallel-plate electrostatic load superimposed on an ac harmonic load. Nonlinear phenomena are investigated experimentally and theoretically including primary resonance, superharmonic and subharmonic resonances, dynamic pull-in and the escape-from-potential-well phenomenon. As a case study, a capacitive sensor made up of two cantilever beams with a proof mass attached to their tips is studied. A nonlinear spring–mass–damper model is utilized accounting for squeeze-film damping and the parallel-plate electrostatic force. Long-time integration and a global dynamic analysis are conducted using a finite-difference method combined with the Floquet theory to capture periodic orbits and analyze their stability. The domains of attraction (basins of attraction) for data points on the frequency–response curve are calculated numerically. Dover cliff integrity curves are calculated and the erosion of the safe basin of attraction is investigated as the frequency of excitation is swept passing primary resonance and dynamic pull-in. Conclusions are presented regarding the safety and integrity of MEMS resonators based on the simulated basin of attraction and the observed experimental data.

No abstract

No abstract