The aim of this work was to investigate the mechanistic evaluation of physicochemical properties of new engineered lactose on aerosolisation performance of salbutamol sulphate (SS) delivered from dry powder inhaler (DPI). Different crystallised lactose particles were obtained from binary mixtures of butanol:acetone. The sieved fractions (63-90 μm) of crystallised lactose were characterised in terms of size, shape, flowability, true density and aerosolisation performance (using multiple twin stage impinger (MSLI), Aerolizer(®) inhaler device, and salbutamol sulphate as a model drug). Compared to commercial lactose, crystallised lactose particles were less elongated, covered with fine lactose particles, and had a rougher surface morphology. The crystallised lactose powders had a considerably lower bulk and tap density and poorer flow when compared to commercial lactose. Engineered carrier with better flow showed improved drug content homogeneity, reduced amounts of drug "deposited" on the inhaler device and throat, and a smaller drug aerodynamic diameter upon inhalation. Aerodynamic diameter of salbutamol sulphate increased as lactose aerodynamic diameter decreased (linear, R(2)=0.9191) and/or as fine particle lactose content increased (linear, R(2)=0.8653). Improved drug aerosolisation performance in the case of crystallised lactose particles was attributed to lower drug-carrier adhesion forces due to a rougher surface and higher fine particle content. In conclusion, this work proved that using binary combinations of solvents in crystallisation medium is vital in modification of the physicochemical and micromeritic properties of carriers to achieve a desirable aerosolisation performance from DPI formulations. Among all lactose samples, lactose particles crystallised from pure butanol generated the highest overall DPI formulations desirability.
Paracetamol is a popular over-the-counter analgesic and a challenging model drug due to its poor technological and biopharmaceutical properties such as flowability, compressibility, compactibility and wettability. This work was aimed to alter the crystal habit of paracetamol from elongated to polyhedral-angular via particle engineering whilst maintaining the stable polymorphic form (form I: monoclinic form). The engineered paracetamol crystals obtained in the present investigation showed better technological and biopharmaceutical properties in comparison to the commercial paracetamol. Engineered paracetamol crystals were obtained using antisolvent crystallization technique in the presence of various concentrations (0.1, 0.5 and 1%, w/w) of additives, namely, polyvinyl alcohol (PVA), Avicel PH 102 (microcrystalline cellulose), Brij 58, methylcellulose (MC) and polyethylene glycol having different molecular weights (PEGs 1500, 6000 and 8000). Paracetamols crystallized in the presence of Avicel (or physically mixed with Avicel), Brij 58 and PEG 6000 demonstrated the best compactibility over a range of compaction pressures. Brij-crystallized paracetamol provided the fastest dissolution rate among all the paracetamol batches. Paracetamols crystallized in the presence of PVA or Avicel, or physically mixed with Avicel demonstrated a reduced degree of crystallinity in comparison to the other paracetamols. This study showed that the type, the grade and the concentration of additives could influence the physical stability such as flow, crystallinity and polymorphic transformation of paracetamol, the technological and biopharmaceutical properties of paracetamol. Stable polymorphic form of paracetamol with optimal tableting characteristics can be achieved through particle engineering.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.