Cellular networks are in a major transition from a carefully planned set of large tower-mounted base-stations (BSs) to an irregular deployment of heterogeneous infrastructure elements that often additionally includes micro, pico, and femtocells, as well as distributed antennas. In this paper, we develop a tractable, flexible, and accurate model for a downlink heterogeneous cellular network (HCN) consisting of K tiers of randomly located BSs, where each tier may differ in terms of average transmit power, supported data rate and BS density. Assuming a mobile user connects to the strongest candidate BS, the resulting Signal-to-Interference-plus-Noise-Ratio (SINR) is greater than 1 when in coverage, Rayleigh fading, we derive an expression for the probability of coverage (equivalently outage) over the entire network under both open and closed access, which assumes a strikingly simple closed-form in the high SINR regime and is accurate down to -4 dB even under weaker assumptions. For external validation, we compare against an actual LTE network (for tier 1) with the other K-1 tiers being modeled as independent Poisson Point Processes. In this case as well, our model is accurate to within 1-2 dB. We also derive the average rate achieved by a randomly located mobile and the average load on each tier of BSs. One interesting observation for interference-limited open access networks is that at a given SINR, adding more tiers and/or BSs neither increases nor decreases the probability of coverage or outage when all the tiers have the same target-SINR.Comment: IEEE Journal on Selected Areas in Communications, vol. 30, no. 3, pp. 550 - 560, Apr. 201
Pushing data traffic from cellular to WiFi is an example of inter radio access technology (RAT) offloading. While this clearly alleviates congestion on the over-loaded cellular network, the ultimate potential of such offloading and its effect on overall system performance is not well understood. To address this, we develop a general and tractable model that consists of M different RATs, each deploying up to K different tiers of access points (APs), where each tier differs in transmit power, path loss exponent, deployment density and bandwidth. Each class of APs is modeled as an independent Poisson point process (PPP), with mobile user locations modeled as another independent PPP, all channels further consisting of i.i.d. Rayleigh fading. The distribution of rate over the entire network is then derived for a weighted association strategy, where such weights can be tuned to optimize a particular objective. We show that the optimum fraction of traffic offloaded to maximize SINR coverage is not in general the same as the one that maximizes rate coverage, defined as the fraction of users achieving a given rate.
Abstract-Cellular uplink analysis has typically been undertaken by either a simple approach that lumps all interference into a single deterministic or random parameter in a Wynertype model, or via complex system level simulations that often do not provide insight into why various trends are observed. This paper proposes a novel middle way using point processes that is both accurate and also results in easy-to-evaluate integral expressions based on the Laplace transform of the interference. We assume mobiles and base stations are randomly placed in the network with each mobile pairing up to its closest base station. Compared to related recent work on downlink analysis, the proposed uplink model differs in two key features. First, dependence is considered between user and base station point processes to make sure each base station serves a single mobile in the given resource block. Second, per-mobile power control is included, which further couples the transmission of mobiles due to location-dependent channel inversion. Nevertheless, we succeed in deriving the coverage (equivalently outage) probability of a typical link in the network. This model can be used to address a wide variety of system design questions in the future. In this paper we focus on the implications for power control and see that partial channel inversion should be used at low signal-to-interference-plus-noise ratio (SINR), while full power transmission is optimal at higher SINR.
The proliferation of internet-connected mobile devices will continue to drive growth in data traffic in an exponential fashion, forcing network operators to dramatically increase the capacity of their networks. To do this cost-effectively, a paradigm shift in cellular network infrastructure deployment is occurring away from traditional (expensive) high-power tower-mounted base stations and towards heterogeneous elements. Examples of heterogeneous elements include microcells, picocells, femtocells, and distributed antenna systems (remote radio heads), which are distinguished by their transmit powers/coverage areas, physical size, backhaul, and propagation characteristics. This shift presents many opportunities for capacity improvement, and many new challenges to co-existence and network management. This article discusses new theoretical models for understanding the heterogeneous cellular networks of tomorrow, and the practical constraints and challenges that operators must tackle in order for these networks to reach their potential.
Matching the demand for resources ("load") with the supply of resources ("capacity") is a basic problem occurring across many fields of engineering, logistics, and economics, and has been considered extensively both in the Internet and in wireless networks. The ongoing evolution of cellular communication networks into dense, organic, and irregular heterogeneous networks ("HetNets") has elevated load-awareness to a central problem, and introduces many new subtleties. This paper explains how several long-standing assumptions about cellular networks need to be rethought in the context of a load-balanced HetNet: we highlight these as three deeply entrenched myths that we then dispel. We survey and compare the primary technical approaches to HetNet load balancing: (centralized) optimization, game theory, Markov decision processes, and the newly popular cell range expansion (a.k.a. "biasing"), and draw design lessons for OFDMA-based cellular systems. We also identify several open areas for future exploration.
In this paper, we consider a finite network of unmanned aerial vehicles (UAVs) serving a given region. Modeling this network as a uniform binomial point process (BPP), we derive the downlink coverage probability of a reference receiver located at an arbitrary position on the ground assuming Nakagami-m fading for all wireless links. The reference receiver is assumed to connect to its closest transmitting node as is usually the case in cellular systems. After deriving the distribution of distances from the reference receiver to the serving and interfering nodes, we derive an exact expression for downlink coverage probability in terms of the derivative of Laplace transform of interference power distribution. In the downlink of this system, it is not unusual to encounter scenarios in which the lineof-sight (LOS) component is significantly stronger than the reflected multipath components. To emulate such scenarios, we also derive the coverage probability in the absence of fading from the results of Nakagami-m fading by taking the limit m → ∞. Using asymptotic expansion of incomplete gamma function, we concretely show that this limit reduces to a redundant condition. Consequently, we derive an accurate coverage probability approximation for this case using dominant interferer-based approach in which the effect of dominant interferer is exactly captured and the residual interference from other interferers is carefully approximated. We then derive the bounds of the approximate coverage probability using Berry-Esseen theorem. Our analyses reveal several useful trends in coverage probability as a function of height of the transmitting nodes and the location of reference receiver on the ground.
We develop a general downlink model for multiantenna heterogeneous cellular networks (HetNets), where base stations (BSs) across tiers may differ in terms of transmit power, target signal-to-interference-ratio (SIR), deployment density, number of transmit antennas and the type of multi-antenna transmission. In particular, we consider and compare space division multiple access (SDMA), single user beamforming (SU-BF), and baseline single-input single-output (SISO) transmission. For this general model, the main contributions are: (i) ordering results for both coverage probability and per user rate in closed form for any BS distribution for the three considered techniques, using novel tools from stochastic orders, (ii) upper bounds on the coverage probability assuming a Poisson BS distribution, and (iii) a comparison of the area spectral efficiency (ASE). The analysis concretely demonstrates, for example, that for a given total number of transmit antennas in the network, it is preferable to spread them across many single-antenna BSs vs. fewer multiantenna BSs. Another observation is that SU-BF provides higher coverage and per user data rate than SDMA, but SDMA is in some cases better in terms of ASE.
Device-to-device (D2D) communication enables direct communication between proximate devices thereby improving the overall spectrum utilization and offloading traffic from cellular networks. This paper develops a new spatial model for D2D networks in which the device locations are modeled as a Poisson cluster process. Using this model, we study the performance of a typical D2D receiver in terms of coverage probability under two realistic content availability setups: (i) content of interest for a typical device is available at a device chosen uniformly at random from the same cluster, which we term uniform content availability, and (ii) content of interest is available at the k th closest device from the typical device inside the same cluster, which we term k-closest content availability. Using these coverage probability results, we also characterize the area spectral efficiency (ASE) of the whole network for the two setups. A key intermediate step in this analysis is the derivation of the distributions of distances from a typical device to both the intra-and inter-cluster devices. Our analysis reveals that an optimum number of D2D transmitters must be simultaneously activated per cluster in order to maximize ASE.This can be interpreted as the classical tradeoff between more aggressive frequency reuse and higher interference power. The optimum number of simultaneously transmitting devices and the resulting ASE increase as the content is made available closer to the receivers. Our analysis also quantifies the best and worst case performance of clustered D2D networks both in terms of coverage and ASE. Index TermsDevice-to-device (D2D) communication, clustered D2D network, Poisson cluster process, Thomas cluster process, stochastic geometry.M. Afshang is with Wireless@VT,
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.