No abstract

Abstract. Ceramic foam is a class of highly porous materials that are used for wide range of technological applications, specifically as absorbents and membrane for wastewater treatment process. Among the potential materials include silicon carbide (SiC), alumina (Al 2 O 3 ), zirconia (ZrO 2 ), titania (TiO 2 ), and silica (SiO 2 ). The review clarifies on the broad types of ceramic foam, and the common techniques of foam fabrication, such as polymeric sponge method, starch consolidation, direct foaming, and gel-casting of foam. The parameters of each fabrication techniques will be discussed crucial based on the new research findings in the field of ceramic foam.

This paper presents the synthesis of silica (SiO2) from rice husk at different firing temperatures. Due to the environmental awareness and to reduce air pollution, agricultural wastes specifically rice husk is used to produce SiO2. Silica was prepared by washing with clean water without any chemical treatment. The rice husk was fired at 700, 800, 900, 1000, 1100 and 1200°C. In order to determine the effect of firing rice husk at different temperature, X-ray Diffraction (XRD) analyses were conducted. Crystalline silica were obtained at 1100°C and 1200°C firing temperature. At 900°C and 1000°C firing temperature, silica was observed to be in a transitional phase of amorphous into crystalline or it called as semi crystalline. However, at 700°C and 800°C silica remains to be in amorphous phases.

No abstract

The present work provides a brief but wide ranging survey of the different methods that may be used to apply thick films of titanium dioxide for self-cleaning building materials. This survey is preceded by a general description of the photocatalytic applications of TiO 2 , a tabulated list of some relevant properties of the three naturally occurring polymorphs of TiO 2 and a tabulated survey of world market shares and resources of TiO 2 . The survey of coating technologies consists of succinct coverage of twenty potential periodic and continuous routes for the application of liquid borne suspensions of TiO 2 to building units. This coverage consists mainly of an illustration accompanied by relevant comments concerning the advantages and disadvantages of each method.