No abstract

No abstract

Nanoscale zerovalent iron (nZVI) particles were injected into a contaminated sandy subsurface area in Sarnia, Ontario. The nZVI was synthesized on site, creating a slurry of 1 g/L nanoparticles using the chemical precipitation method with sodium borohydride (NaBH4) as the reductant in the presence of 0.8% wt. sodium carboxymethylcellulose (CMC) polymer to form a stable suspension. Individual nZVI particles formed during synthesis had a transmission electron microscopy (TEM) quantified particle size of 86.0 nm and dynamic light scattering (DLS) quantified hydrodynamic diameter for the CMC and nZVI of 624.8 nm. The nZVI was delivered to the subsurface via gravity injection. Peak normalized total Fe breakthrough of 71% was observed 1m from the injection well and remained above 50% for the 24 h injection period. Samples collected from a monitoring well 1 m from the injection contained nanoparticles with TEM-measured particle diameter of 80.2 nm and hydrodynamic diameter of 562.9 nm. No morphological changes were discernible between the injected nanoparticles and nanoparticles recovered from the monitoring well. Energy dispersive X-ray spectroscopy (EDS) was used to confirm the elemental composition of the iron nanoparticles sampled from the downstream monitoring well, verifying the successful transport of nZVI particles. This study suggests that CMC stabilized nZVI can be transported at least 1 m to the contaminated source zone at significant Fe(0) concentrations for reaction with target contaminants.

Nano zerovalent iron (nZVI) is an effective remediant for removing various organic and inorganic pollutants from contaminated water sources. Batch experiments were conducted to characterize the nZVI surface and to investigate the effects of various solution properties such as pH, initial cadmium concentration, sorbent dosage, ionic strength, and competitive ions on cadmium removal by nZVI. Energy-dispersive X-ray and X-ray photoelectron spectroscopy results confirmed removal of Cd(2+) ions by nZVI through adsorption. Cd(2+) adsorption decreased in the presence of competitive cations in the order: Zn(2+) > Co(2+) > Mg(2+) > Mn(2+) = Cu(2+) > Ca(2+) > Na(2+) = K(+). Higher concentrations of Cl(-) significantly decreased the adsorption. Cadmium removal increased with solution pH and reached a maximum at pH 8.0. The effects of various solution properties indicated Cd(2+) adsorption on nZVI to be a chemisorption (inner-sphere complexation) process. The three surface complexation models (diffuse layer model, constant capacitance model, and triple layer model) fitted well to the adsorption edge experimental data indicating the formation of nZVI-Cd bidentate inner-sphere surface complexes. Our results suggest that nZVI can be effectively used for the removal of cadmium from contaminated water sources with varying chemical conditions.

A pilot scale injection of nanoscale zerovalent iron (nZVI) stabilized with carboxymethyl cellulose (CMC) was performed at an active field site contaminated with a range of chlorinated volatile organic compounds (cVOC). The cVOC concentrations and microbial populations were monitored at the site before and after nZVI injection. The remedial injection successfully reduced parent compound concentrations on site. A period of abiotic degradation was followed by a period of enhanced biotic degradation. Results suggest that the nZVI/CMC injection created conditions that stimulated the native populations of organohalide-respiring microorganisms. The abundance of Dehalococcoides spp. immediately following the nZVI/CMC injection increased by 1 order of magnitude throughout the nZVI/CMC affected area relative to preinjection abundance. Distinctly higher cVOC degradation occurred as a result of the nZVI/CMC injection over a 3 week evaluation period when compared to control wells. This suggests that both abiotic and biotic degradation occurred following injection.

Atrazine-contaminated soil may require remediation to mitigate ground and surface water contamination. We determined the effectiveness of nano zerovalent iron (nano ZVI) to dechlorinate atrazine (2-chloro-4ethylamino-6-iso-propylamino-1,3,5-triazine) in contaminated water and soil. This study determined the effects of iron sources, solution pH, Pd catalyst and presence of Fe or Al sulfate salts on the destruction of atrazine in water and soil. Our results indicate nano ZVI can be successfully used to remediate atrazine in water and soil. Aqueous solution of atrazine (30 mg l −1 ) was treated with 2% (w/v) of nano ZVI and 5% (w/v) of commercial ZVI. Although, iron dose in nano ZVI treatment was less than that in commercial ZVI treatment, atrazine destruction kinetic rate (k obs ) of nano ZVI treatment (1.39 days −1 ) was around seven times higher than that of commercial ZVI treatment (0.18 days −1 ). Reductive dechlorination was the major process in destruction of atrazine by nano ZVI. The dechlorination product was 2-ethyl-amino-4-isopropylamino-1,3,5-triazine. Lowering the pH from 9 to 4 increased the destruction kinetic rates of atrazine by nano ZVI. Moreover, nano ZVI/Pd enhanced destruction kinetic rates of atrazine (3.36 day −1 ). Pd played the important role as a catalyst during treatment of atrazine by nano ZVI. Atrazine destruction kinetic rates were greatly enhanced in both contaminated water and soil treatments by nano ZVI when sulfate salts of Fe(II), Fe(III) or Al(III) was add with the following order of removal rates: Al (III) (2.23 day −1 ) > Fe (III) (2.04 day −1 ) > Fe(II) (1.79 day −1 ). The same results were found in atrazine-nano ZVI-soil incubation experiments.

Nanoscale zerovalent iron (nZVI) is an emerging technology for the remediation of contaminated sites. However, there are concerns related to the impact of nZVI on in situ microbial communities. In this study, the microbial community composition at a contaminated site was monitored over two years following the injection of nZVI stabilized with carboxymethyl cellulose (nZVI-CMC). Enhanced dechlorination of chlorinated ethenes to nontoxic ethene was observed long after the expected nZVI oxidation. The abundance of Dehalococcoides (Dhc) and vinyl chloride reductase (vcrA) genes, monitored using qPCR, increased by over an order of magnitude in nZVI-CMC-impacted wells. The entire microbial community was tracked using 16S rRNA gene amplicon pyrosequencing. Following nZVI-CMC injection, a clear shift in microbial community was observed, with most notable increases in the dechlorinating genera Dehalococcoides and Dehalogenimonas. This study suggests that coupled abiotic degradation (i.e., from reaction with nZVI) and biotic degradation fueled by CMC led to the long-term degradation of chlorinated ethenes at this field site. Furthermore, nZVI-CMC addition stimulated dehalogenator growth (e.g., Dehalococcoides) and biotic degradation of chlorinated ethenes.

The prevalent use of chloroacetanilide herbicides has resulted in nonpoint contamination of some groundwater and surface water. We determined the efficacy of dithionite-treated sediment and soils to transform chloroacetanilides. When used alone, dithionite rapidly dechlorinates chloroacetanilides in water, with the following order of reactivity: propachlor > alachlor > acetochlor > metolachlor. Stoichiometric release of chloride occurs during reaction with dithionite, and thiosulfate herbicide derivatives are produced. Treating aquifer sediment with dithionite reduces native Fe(lII), creating a redox barrier of Fe(ll)-bearing minerals and surface-bound Fe(ll). Washing the reduced sediment (buffered with citrate-bicarbonate) with oxygen-free water removed Fe(ll) and excess dithionite and no alachlor transformation was observed. In contrast, a dithionite-treated surface soil, rich in clay and iron, effectively dechlorinated alachlor after washing. Exposing alachlor to aquifer sediment treated with dithionite in potassium carbonate buffer (pH 8.5-9.0) produced dechlorinated alachlor as the major degradation product. Our results provide proof-of-concept that dechlorination of chloroacetanilide herbicides by dithionite and dithionite-treated aquifer sediment and soil is a remediation option in natural environments where iron-bearing minerals are abundant.