No abstract

Transceivers operating in frequency division duplex experience a transmitter leakage (TxL) signal into the receiver due to the limited duplexer stop-band isolation. This TxL signal in combination with the second-order nonlinearity of the receive mixer may lead to a baseband (BB) second-order intermodulation distortion (IMD2) with twice the transmit signal bandwidth. In direct conversion receivers, this nonlinear IMD2 interference may cause a severe signal-to-interference-plus-noise ratio degradation of the wanted receive signal. This contribution presents a nonlinear Wiener model recursive-least-squares (RLS) type adaptive filter for the cancellation of the IMD2 interference in the digital BB. The included channel-select-, and DC-notch filter at the output of the proposed adaptive filter ensure that the provided IMD2 replica includes the receiver front-end filtering. A second, robust version of the nonlinear RLS algorithm is derived which provides numerical stability for highly correlated input signals which arise in e.g. LTE-A intra-band multi-cluster transmission scenarios. The performance of the proposed algorithms is evaluated by numerical simulations and by measurement data.

No abstract

This article presents a comprehensive survey of the literature on self-interference (SI) in long-term evolution advanced (LTE-A) and fifth-generation (5G) new radio transceivers and should serve the reader as a guide and starting point for further work on SI management. Current trends in cellular transceiver designs are discussed, and reasons why new technologies, such as carrier aggregation, cause potential sensitivity degradation due to self-interfering signals are highlighted. The survey provides an overview of the most common interference mechanisms and continues with a taxonomy on SI mitigation architectures by comparing the strengths and weaknesses of various techniques.

Brain-Computer Interface (BCI) technology enables users to operate external devices without physical movement. Electroencephalography (EEG) based BCI systems are being actively studied due to their high temporal resolution, convenient usage, and portability. However, fewer studies have been conducted to investigate the impact of high spatial resolution of EEG on decoding precise body motions, such as finger movements, which are essential in activities of daily living. Low spatial sensor resolution, as found in common EEG systems, can be improved by omitting the conventional standard of EEG electrode distribution (the international 10–20 system) and ordinary mounting structures (e.g., flexible caps). In this study, we used newly proposed flexible electrode grids attached directly to the scalp, which provided ultra-high-density EEG (uHD EEG). We explored the performance of the novel system by decoding individual finger movements using a total of 256 channels distributed over the contralateral sensorimotor cortex. Dense distribution and small-sized electrodes result in an inter-electrode distance of 8.6 mm (uHD EEG), while that of conventional EEG is 60 to 65 mm on average. Five healthy subjects participated in the experiment, performed single finger extensions according to a visual cue, and received avatar feedback. This study exploits mu (8–12 Hz) and beta (13–25 Hz) band power features for classification and topography plots. 3D ERD/S activation plots for each frequency band were generated using the MNI-152 template head. A linear support vector machine (SVM) was used for pairwise finger classification. The topography plots showed regular and focal post-cue activation, especially in subjects with optimal signal quality. The average classification accuracy over subjects was 64.8 (6.3)%, with the middle versus ring finger resulting in the highest average accuracy of 70.6 (9.4)%. Further studies are required using the uHD EEG system with real-time feedback and motor imagery tasks to enhance classification performance and establish the basis for BCI finger movement control of external devices.