This study assesses the seabed pressure of towed fishing gears and models the physical impact (area and depth of seabed penetration) from trip-based information of vessel size, gear type, and catch. Traditionally fishing pressures are calculated top-down by making use of large-scale statistics such as logbook data. Here, we take a different approach starting from the gear itself (design and dimensions) to estimate the physical interactions with the seabed at the level of the individual fishing operation. We defined 14 distinct towed gear groups in European waters (eight otter trawl groups, three beam trawl groups, two demersal seine groups, and one dredge group), for which we established gear “footprints”. The footprint of a gear is defined as the relative contribution from individual larger gear components, such as trawl doors, sweeps, and groundgear, to the total area and severity of the gear's impact. An industry-based survey covering 13 countries provided the basis for estimating the relative impact-area contributions from individual gear components, whereas sediment penetration was estimated based on a literature review. For each gear group, a vessel size–gear size relationship was estimated to enable the prediction of gear footprint area and sediment penetration from vessel size. Application of these relationships with average vessel sizes and towing speeds provided hourly swept-area estimates by métier. Scottish seining has the largest overall gear footprint of ∼1.6 km 2 h −1 of which 0.08 km 2 has an impact at the subsurface level (sediment penetration ≥ 2 cm). Beam trawling for flatfish ranks low when comparing overall footprint size/hour but ranks substantially higher when comparing only impact at the subsurface level (0.19 km 2 h −1 ). These results have substantial implications for the definition, estimation, and monitoring of fishing pressure indicators, which are discussed in the context of an ecosystem approach to fisheries management.

Beam trawling causes physical disruption of the seabed through contact of the gear components with the sediment and the resuspension of sediment into the water column in the turbulent wake of the gear. To be able to measure and quantify these impacts is important so that gears of reduced impact can be developed. Here we assess the physical impact of both a conventional 4 m tickler-chain beam trawl and a “Delmeco” electric pulse beam trawl. We measure the changes in seabed bathymetry following the passage of these gears using a Kongsberg EM2040 multi-beam echosounder and use a LISST 100X particle size analyser to measure the concentration and particle size distribution of the sediment mobilized into the water column. We also estimate the penetration of the gears into the seabed using numerical models for the mechanical interaction between gears and seabed. Our results indicate that the seabed bathymetry changes between ∼1 and 2 cm and that it is further increased by higher trawling frequencies. Furthermore, our results suggest that the alteration following the passage of the conventional trawl is greater than that following the pulse trawl passage. There was no difference in the quantity of sediment mobilized in the wake of these two gears; however, the numerical model introduced in this study predicted that the tickler-chain trawl penetrates the seabed more deeply than the pulse gear. Hence, greater alteration to the seabed bathymetry by the tickler-chain beam trawling is likely to be a result of its greater penetration. The complimentary insights of the different techniques highlight the advantage of investigating multiple effects such as sediment penetration and resuspension simultaneously and using both field trials and numerical modelling approaches.

No abstract

In trawl fisheries, beam trawls with tickler chains, chain mats or bobbin ropes are used to target flatfish or shrimp. High fuel consumption, seabed disturbance and high discard rates are well-known disadvantages of this fishing technique. These shortcomings are increasingly gaining international public and political attention, especially with the upcoming discard ban in Europe. The most promising alternative fishing technique meeting both the fisherman's aspirations, and the need for ecological progress is pulse fishing with electrotrawls. Here, the mechanical stimulation by tickler chains or bobbins is replaced by electrical stimulation resulting in reduced bottom contact, fuel costs and discards. Although a significant amount of research has been done on electrotrawls and their impact on marine organisms, most data were published in very diverse sources ranging from local non-peer-reviewed reports with a limited distribution to highly consulted international peer-reviewed journals. Therefore, there is a clear need for a comprehensive yet concise and critical overview, covering and summarizing all these data and making these available for the scientific community. This article aims to meet the above goals by discussing the working principle of electric fields, the history of electrotrawls and their current application in the North Sea and impact on marine organisms. It is concluded by elaborating on the opportunities and challenges for the further implementation of this alternative fishing technique

A framework to assess the impact of mobile fishing gear on the seabed and benthic ecosystem is presented. The framework that can be used at regional and local scales provides indicators for both trawling pressure and ecological impact. It builds on high-resolution maps of trawling intensity and considers the physical effects of trawl gears on the seabed, on marine taxa, and on the functioning of the benthic ecosystem. Within the framework, a reductionist approach is applied that breaks down a fishing gear into its components, and a number of biological traits are chosen to determine either the vulnerability of the benthos to the impact of that gear component, or to provide a proxy for their ecological role. The approach considers gear elements, such as otter boards, twin trawl clump, and groundrope, and sweeps that herd the fish. The physical impact of these elements on the seabed, comprising scraping of the seabed, sediment mobilization, and penetration, is a function of the mass, size, and speed of the individual component. The impact of the elements on the benthic community is quantified using a biological-trait approach that considers the vulnerability of the benthic community to trawl impact (e.g. sediment position, morphology), the recovery rate (e.g. longevity, maturation age, reproductive characteristics, dispersal), and their ecological role. The framework is explored to compare the indicators for pressure and ecological impact of bottom trawling in three main seabed habitat types in the North Sea. Preliminary results show that the Sublittoral mud (EUNIS A5.3) is affected the most due to the combined effect of intensive fishing and large proportions of long-lived taxa.