The objective of this study was to quantify the chemical content of multiple products using one single calibration model. This study involved seven tuber and root powders from arrowroot, Canna edulis , cassava, taro, as well as purple, yellow, and white sweet potato, for partial least square (PLS) regression to predict polysaccharide contents (i.e., amylose, starch, and cellulose). The developed PLS models showed acceptable results, with R c 2 of 0.9, 0.95, and 0.85 and SEC of 2.7%, 3.33%, and 3.22%, for amylose, starch, and cellulose, respectively. The models also successfully predicted polysaccharide contents with R p 2 of 0.89, 0.95, and 0.79; SEP of 2.83%, 3.33%, and 3.55%; and RPD of 3.02, 4.47, and 2.18 for amylose, starch, and cellulose, respectively. These results showed the potential of Fourier transform near-infrared spectroscopy to quantify the chemical composition of multiple products instead of using one individual model.
Ensuring the quality of fresh-cut vegetables is the greatest challenge for the food industry and is equally as important to consumers (and their health). Several investigations have proven the necessity of advanced technology for detecting foreign materials (FMs) in fresh-cut vegetables. In this study, the possibility of using near infrared spectral analysis as a potential technique was investigated to identify various types of FMs in seven common fresh-cut vegetables by selecting important wavebands. Various waveband selection methods, such as the weighted regression coefficient (WRC), variable importance in projection (VIP), sequential feature selection (SFS), successive projection algorithm (SPA), and interval PLS (iPLS), were used to investigate the optimal multispectral wavebands to classify the FMs and vegetables. The application of selected wavebands was further tested using NIR imaging, and the results showed good potentiality by identifying 99 out of 107 FMs. The results indicate the high applicability of the multispectral NIR imaging technique to detect FMs in fresh-cut vegetables for industrial application.
Anthocyanins are an important micro-component that contributes to the quality factors and health benefits of black rice. Anthocyanins concentration and compositions differ among rice seeds depending on the varieties, growth conditions, and maturity level at harvesting. Chemical composition-based seeds inspection on a real-time, non-destructive, and accurate basis is essential to establish industries to optimize the cost and quality of the product. Therefore, this research aimed to evaluate the feasibility of near-infrared hyperspectral imaging (NIR-HSI) to predict the content of anthocyanins in black rice seeds, which will open up the possibility to develop a sorting machine based on rice micro-components. Images of thirty-two samples of black rice seeds, harvested in 2019 and 2020, were captured using the NIR-HSI system with a wavelength of 895–2504 nm. The spectral data extracted from the image were then synchronized with the rice anthocyanins reference value analyzed using high-performance liquid chromatography (HPLC). For comparison, the seed samples were ground into powder, which was also captured using the same NIR-HSI system to obtain the data and was then analyzed using the same method. The model performance of partial least square regression (PLSR) of the seed sample developed based on harvesting time, and mixed data revealed the model consistency with R2 over 0.85 for calibration datasets. The best prediction models for 2019, 2020, and mixed data were obtained by applying standard normal variate (SNV) pre-processing, indicated by the highest coefficient of determination (R2) of 0.85, 0.95, 0.90, and the lowest standard error of prediction (SEP) of 0.11, 0.17, and 0.16 mg/g, respectively. The obtained R2 and SEP values of the seed model were comparable to the result of powder of 0.92–0.95 and 0.09–0.15 mg/g, respectively. Additionally, the obtained beta coefficients from the developed model were used to generate seed chemical images for predicting anthocyanins in rice seed. The root mean square error (RMSE) value for seed prediction evaluation showed an acceptable result of 0.21 mg/g. This result exhibits the potential of NIR-HSI to be applied in a seed sorting machine based on the anthocyanins content.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.