Mesenchymal stem cells (MSCs) are clinically useful due to their capacity for self-renewal, their immunomodulatory properties and tissue regenerative potential. These cells can be isolated from various tissues and exhibit different potential for clinical applications according to their origin, and thus comparative studies on MSCs from different tissues are essential. In this study, we investigated the immunophenotype, proliferative potential, multilineage differentiation and immunomodulatory capacity of MSCs derived from different tissue sources, namely bone marrow, adipose tissue, the placenta and umbilical cord blood. The gene expression profiles of stemness-related genes [octamer-binding transcription factor 4 (OCT4), sex determining region Y-box (SOX)2, MYC, Krüppel-like factor 4 (KLF4), NANOG, LIN28 and REX1] and lineage-related and differentiation stage-related genes [B4GALNT1 (GM2/GS2 synthase), inhibin, beta A (INHBA), distal-less homeobox 5 (DLX5), runt-related transcription factor 2 (RUNX2), proliferator-activated receptor gamma (PPARG), CCAAT/enhancer-binding protein alpha (C/EBPA), bone morphogenetic protein 7 (BMP7) and SOX9] were compared using RT-PCR. No significant differences in growth rate, colony-forming efficiency and immunophenotype were observed. Our results demonstrated that MSCs derived from bone marrow and adipose tissue shared not only in vitro trilineage differentiation potential, but also gene expression profiles. While there was considerable interdonor variation in DLX5 expression between MSCs derived from different tissues, its expression appears to be associated with the osteogenic potential of MSCs. Bone marrow-derived MSCs (BM-MSCs) significantly inhibited allogeneic T cell proliferation possibly via the high levels of the immunosuppressive cytokines, IL10 and TGFB1. Although MSCs derived from different tissues and fibroblasts share many characteristics, some of the marker genes, such as B4GALNT1 and DLX5 may be useful for the characterization of MSCs derived from different tissue sources. Collectively, our results suggest that, based on their tri-lineage differentiation potential and immunomodulatory effects, BM-MSCs and adipose tissue-derived MSCs (A-MSCs) represent the optimal stem cell source for tissue engineering and regenerative medicine.

Mesenchymal stem cells (MSCs) have emerged as a promising means for treating degenerative or incurable diseases. Recent studies have shown that microvesicles (MVs) from MSCs (MSC-MVs) contribute to recovery of damaged tissues in animal disease models. Here, we profiled the MSC-MV proteome to investigate their therapeutic effects. LC-MS/MS analysis of MSC-MVs identified 730 MV proteins. The MSC-MV proteome included five positive and two variable known markers of MSCs, but no negative marker, as well as 43 surface receptors and signaling molecules controlling self-renewal and differentiation of MSCs. Functional enrichment analysis showed that cellular processes represented by the MSC-MV proteins include cell proliferation, adhesion, migration, and morphogenesis. Integration of MSC's self-renewal and differentiation-related genes and the proteome of MSC-conditioned media (MSC-CM) with the MSC-MV proteome revealed potential MV protein candidates that can be associated with the therapeutic effects of MSC-MVs: (1) surface receptors (PDGFRB, EGFR, and PLAUR); (2) signaling molecules (RRAS/NRAS, MAPK1, GNA13/GNG12, CDC42, and VAV2); (3) cell adhesion (FN1, EZR, IQGAP1, CD47, integrins, and LGALS1/LGALS3); and (4) MSC-associated antigens (CD9, CD63, CD81, CD109, CD151, CD248, and CD276). Therefore, the MSC-MV proteome provides a comprehensive basis for understanding the potential of MSC-MVs to affect tissue repair and regeneration.

Although steel has been the workhorse of the automotive industry since the 1920s, the share by weight of steel and iron in an average light vehicle is now gradually decreasing, from 68.1 per cent in 1995 to 60.1 per cent in 2011 (refs 1, 2). This has been driven by the low strength-to-weight ratio (specific strength) of iron and steel, and the desire to improve such mechanical properties with other materials. Recently, high-aluminium low-density steels have been actively studied as a means of increasing the specific strength of an alloy by reducing its density. But with increasing aluminium content a problem is encountered: brittle intermetallic compounds can form in the resulting alloys, leading to poor ductility. Here we show that an FeAl-type brittle but hard intermetallic compound (B2) can be effectively used as a strengthening second phase in high-aluminium low-density steel, while alleviating its harmful effect on ductility by controlling its morphology and dispersion. The specific tensile strength and ductility of the developed steel improve on those of the lightest and strongest metallic materials known, titanium alloys. We found that alloying of nickel catalyses the precipitation of nanometre-sized B2 particles in the face-centred cubic matrix of high-aluminium low-density steel during heat treatment of cold-rolled sheet steel. Our results demonstrate how intermetallic compounds can be harnessed in the alloy design of lightweight steels for structural applications and others.

Parkinson's disease (PD) is a neurodegenerative disease characterized by a loss of dopaminergic neurons in the substantia nigra. There is a need for genetic animal models of PD for screening and in vivo testing of novel restorative therapeutic agents. Although current genetic models of PD produce behavioral impairment and nigrostriatal dysfunction, they do not reproduce the loss of midbrain dopaminergic neurons and 3,4-dihydroxyphenylalanine (L-DOPA) reversible behavioral deficits. Here, we demonstrate that Pitx3-deficient aphakia (ak) mice, which have been shown previously to exhibit a major loss of substantia nigra dopaminergic neurons, display motor deficits that are reversed by L-DOPA and evidence of "dopaminergic supersensitivity" in the striatum. Thus, ak mice represent a novel genetic model exhibiting useful characteristics to test the efficacy of symptomatic therapies for PD and to study the functional changes in the striatum after dopamine depletion and L-DOPA treatment.

The thermo-mechanical properties of low stacking fault energy austenitic Fe18Mn0.6C steel exhibiting twinning-induced plasticity were investigated during uniaxial tensile deformation using infrared thermography. Over a wide strain range, the plastic deformation was by the movement of very few well-defined localized deformation bands. The formation and propagation of Portevin-LeChatelier (PLC) bands lead to type A and type B serrated stress-strain curves, exhibiting a negative strain rate sensitivity. The PLC band properties were analyzed in detail: strain, strain rate and mobile dislocation density within the bands were determined. The microstructures of the un-deformed and deformed Fe18Mn0.6C TWIP steel were studied by transmission electron microscopy. The possible dynamic strain aging processes causing the localized deformation are reviewed.KEY WORDS: TWIP steel; thermo-mechanical properties; dynamic strain aging.loyed steel. 12) In TWIP steel, twinning may interact with the ordering, as the homogeneous twinning shear also alters the degree of short range order as it results in a different pair correlation and interstitials in different positions. This mechanism is referred to as pseudo-twinning. [13][14][15] It leads to a meta-stable structure which may transform to a true twin structure as a result of thermal activation.The flow curve of high Mn TWIP steels containing interstitial carbon are often characterized by serrations, the Portevin-LeChatelier (PLC) phenomenon, and a negative strain rate sensitivity. Both result from a microscopic Dynamic Strain Aging (DSA) process. DSA results in an increase in flow stress and strain hardening, but a decrease in post-uniform elongation and a reduction of area at fracture. When both DSA and a negative strain rate sensitivity occur simultaneously, Portevin-LeChatelier (PLC) bands will be observed, and the stress-strain curve will have characteristic serrations. 16)DSA occurs when an aging process, related to solute atoms, is fast enough to occur during deformation, i.e. when the dislocation velocity is similar to the solute mobility, as dislocations move by means of thermally activated jumps, with a characteristic waiting time between two jumps. As pointed out by Cuddy et al. 17) no long range diffusion is required and the solutes involved in the aging process may actually remain immobile in the lattice. Dastur et al.6) have suggested C-Mn pairs or point defect clusters which reorient themselves in the stress field at the core of the dislocations are able to pin the dislocation strongly. It may actually be the C-Mn octahedral clusters rather than C-Mn pairs, and the resulting short range ordering effect, which causes dislocation pinning.The DSA phenomenon is not limited to high Mn TWIP steel, as DSA has also been observed in 316L austenitic stainless steel for which it was shown that plastic deformation changed form wavy slip to a pronounced planar slip during DSA.15) Kibey et al. 8) have pointed out that both C and N affect the dislocation structure and the deform...

Atm1p is an ABC transporter localized in the mitochondrial inner membrane; it functions to export an unknown species into the cytosol and is involved in cellular iron metabolism. Depletion or deletion of Atm1p causes Fe accumulation in mitochondria and a defect in cytosolic Fe/S cluster assembly, but reportedly not a defect in mitochondrial Fe/S cluster assembly. In this study the nature of the accumulated Fe was examined using Mössbauer spectroscopy, EPR, electronic absorption spectroscopy, X-ray absorption spectroscopy, and electron microscopy. The Fe that accumulated in aerobically grown cells was in the form of Fe(III) phosphate nanoparticles similar to that which accumulates in yeast frataxin Yfh1p-deleted or yeast ferredoxin Yah1p-depleted cells. Relative to WT mitochondria, Fe/S cluster and heme levels in Atm1p-depleted mitochondria from aerobic cells were significantly diminished. Atm1p-depletion also caused a build-up of nonheme Fe(II) ions in the mitochondria and an increase in oxidative damage. Atm1p-depleted mitochondria isolated from anaerobically grown cells exhibited WT levels of Fe/S clusters and hemes, and they did not hyper-accumulate Fe. Atm1p-depleted cells lacked Leu1p activity, regardless of whether they were grown aerobically or anaerobically. These results indicate that Atm1p does not participate in mitochondrial Fe/S cluster assembly, and that the species exported by Atm1p is required for cytosolic Fe/S cluster assembly. The Fe/S cluster defect and the Fe-accumulation phenotype, resulting from the depletion of Atm1p in aerobic cells (but not in anaerobic cells), may be secondary effects that are observed only when cells are exposed to oxygen during growth. Reactive oxygen species generated under these conditions might degrade iron-sulfur clusters and lower heme levels in the organelle.

Yah1p, an [Fe 2S 2]-containing ferredoxin located in the matrix of Saccharomyces cerevisiae mitochondria, functions in the synthesis of Fe/S clusters and heme a prosthetic groups. EPR, Mossbauer spectroscopy, and electron microscopy were used to characterize the Fe that accumulates in Yah1p-depleted isolated intact mitochondria. Gal- YAH1 cells were grown in standard rich media (YPD and YPGal) under O 2 or argon atmospheres. Mitochondria were isolated anaerobically, then prepared in the as-isolated redox state, the dithionite-treated state, and the O 2-treated state. The absence of strong EPR signals from Fe/S clusters when Yah1p was depleted confirms that Yah1p is required in Fe/S cluster assembly. Yah1p-depleted mitochondria, grown with O 2 bubbling through the media, accumulated excess Fe (up to 10 mM) that was present as 2-4 nm diameter ferric nanoparticles, similar to those observed in mitochondria from yfh1Delta cells. These particles yielded a broad isotropic EPR signal centered around g = 2, characteristic of superparamagnetic relaxation. Treatment with dithionite caused Fe (3+) ions of the nanoparticles to become reduced and largely exported from the mitochondria. Fe did not accumulate in mitochondria isolated from cells grown under Ar; a significant portion of the Fe in these organelles was in the high-spin Fe (2+) state. This suggests that the O 2 used during growth of Gal- YAH1 cells is responsible, either directly or indirectly, for Fe accumulation and for oxidizing Fe (2+) --> Fe (3+) prior to aggregation. Models are proposed in which the accumulation of ferric nanoparticles is caused either by the absence of a ligand that prevents such precipitation in wild-type mitochondria or by a more oxidizing environment within the mitochondria of Yah1p-depleted cells exposed to O 2. The efficacy of reducing accumulated Fe along with chelating it should be considered as a strategy for its removal in diseases involving such accumulations.

Adding a large amount of light elements such as aluminum to steels is not a new concept recalling that several Fe–Al–Mn–C alloys were patented in 1950s for replacement of nickel or chromium in corrosion resistance steels. However, the so-called lightweight steels or low-density steels were revisited recently, which is driven by demands from the industry where steel has served as a major structural material. Strengthening without loss of ductility has been a triumph in steel research, but lowering the density of steel by mixing with light elements will be another prospect that may support the competitiveness against emerging alternatives such as magnesium alloys. In this paper, we review recent studies on lightweight steels, emphasizing the concept of alloy design for microstructures and mechanical properties. The influence of alloying elements on the phase constituents, mechanical properties and the change of density is critically reviewed. Deformation mechanisms of various lightweight steels are discussed as well. This paper provides a reason why the success of lightweight steels is strongly dependent on scientific achievements even though alloy development is closely related to industrial applications. Finally, we summarize some of the main directions for future investigations necessary for vitalizing this field of interest.