Тhe analytical analysis of roller impact on the medium and its behavior at deformation influences are carried out, ways of choosing an optimal variant of the process for providing the maximum or minimum value of parameters (criterion) are proposed. The physical essence of the equation of energy flows of the intensity of deformation of the mass of the medium, which depends on the method of applying mechanical forces, the degree of its previous dispersion (recipe) and its physical and mechanical properties, is considered. To reveal the essence and understanding of the general research execution, a number of hypotheses for the determination of adhesion are given and a generalized approach to the definition of adhesion is given. The proposed scheme of causal relationships between the medium and roll, divided into three groups, and determine the change in the process of injection dough. The nature of the maximum increase of the forces of interaction of the dough with the high contact of the roller working body in the injection nozzle of the fuming machine is established. Violation of these mutual relations leads to the production of low-quality products and a decrease in the efficiency of the machine. These phenomena are little studied today, and the nature of adhesion requires research. It is noted that the determination of deformation processes during the passage of the process of injection of the medium by roller working bodies plays an important role in calculating the design of molding, roll-over equipment. The deformation in the knot of the injection dough by rolls and the dependence of the work performed on the influence of adhesion on the flow process in the molding machine are revealed. The contact area of the adhesive and the component forming work for overcoming the adhesion and deformation of the environment in determining the criteria that influence the process, according to each particular period of the deformation stage, are substantiated. The obtained data provide an answer to a number of questions about the possibility of regulating the process of the work of agents on the environment.
The analytical analysis of roller impact on the medium and its behaviour at deformation influences are carried out, ways of choosing an optimal variant of the process for providing the maximum or minimum value of parameters (criterion) are proposed. The physical essence of the equation of energy flows of the intensity of deformation of the mass of the medium, which depends on the method of applying mechanical forces, the degree of its previous dispersion (recipe) and its physical and mechanical properties, is considered. For a more visual view and understanding of the overall performance of the research, a scheme of causal relationships between the medium and the roll, which determine the temperature change of the dough injection process, is proposed. It is noted that the determination of the influence of the temperature of deformation processes during the passage of the process of injection of the medium by roller working bodies plays an important role for calculations of the design of molding, roll-over equipment. The influence of thermal circulatory chaotic streams is considered, the character of which also leads to violations of the general heat circulation in the medium during the injection. At the same time, the level of such violations may be sufficiently deep with changes in the directions in their contours that influence the process, according to each particular period of the deformation stage in the injection site of the molding machine. Partly revealed methods for determining the change in temperature fluxes in the dough and on the surface of the roll. On the basis of which the change of the energy potential in the interaction of the viscous medium with rotating roller working bodies in the molding machine is considered. An exchange of energy between moving particles is discovered due to collisions of molecules of a more heated part of the body with a greater energy and the transfer of the energy particle to adjacent particles with less energy. It is noted that the definition of temperature fluxes during the process of injection of the medium by roller working bodies plays an important role in calculating the design of molding, roll-over, mixing equipment. The obtained data answer a number of questions about the possibility of thermoregulation of the process of the work of the working bodies into the environment.A set of measures for measuring the temperature during the use of devices was carried out. On the basis of their data, a real temperature change in the roller unit of the molding machine is considered, with a comparative analysis of existing ones with a newly designed design. The change of the energy potential in the interaction of the viscous medium with rotating roller working bodies in the molding machine is considered. An exchange of energy between moving particles is discovered due to collisions of molecules of a more heated part of the body with a greater energy and the transfer of the energy particle to adjacent particles with less energy. It is noted that the definition of temperature f...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.