No abstract

Research in the rapidly developing field of 2D electronic materials has thus far been focused on metallic and semiconducting materials. However, complementary dielectric materials such as nonlinear dielectrics are needed to enable realistic device architectures. Candidate materials require tunable dielectric properties and pathways for heterostructure assembly. Here we report on a family of cation-deficient transition metal thiophosphates whose unique chemistry makes them a viable prospect for these applications. In these materials, naturally occurring ferrielectric heterostructures composed of centrosymmetric In4/3P2S6 and ferrielectrically active CuInP2S6 are realized by controllable chemical phase separation in van der Waals bonded single crystals. CuInP2S6 by itself is a layered ferrielectric with a ferrielectric transition temperature (Tc) just over room temperature, which rapidly decreases with homogeneous doping. Surprisingly, in our composite materials, the ferrielectric Tc of the polar CuInP2S6 phase increases. This effect is enabled by unique spinodal decomposition that retains the overall van der Waals layered morphology of the crystal, but chemically separates CuInP2S6 and In4/3P2S6 within each layer. The average spatial periodicity of the distinct chemical phases can be finely controlled by altering the composition and/or synthesis conditions. One intriguing prospect for such layered spinodal alloys is large volume synthesis of 2D in-plane heterostructures with periodically alternating polar and nonpolar phases.

No abstract

Single crystals of the van der Waals layered ferrielectric material CuInPS spontaneously phase separate when synthesized with Cu deficiency. Here we identify a route to form and tune intralayer heterostructures between the corresponding ferrielectric (CuInPS) and paraelectric (InPS) phases through control of chemical phase separation. We conclusively demonstrate that Cu-deficient CuInPS forms a single phase at high temperature. We also identify the mechanism by which the phase separation proceeds upon cooling. Above 500 K both Cu and In become mobile, while PS anions maintain their structure. We therefore propose that this transition can be understood as eutectic melting on the cation sublattice. Such a model suggests that the transition temperature for the melting process is relatively low because it requires only a partial reorganization of the crystal lattice. As a result, varying the cooling rate through the phase transition controls the lateral extent of chemical domains over several decades in size. At the fastest cooling rate, the dimensional confinement of the ferrielectric CuInPS phase to nanoscale dimensions suppresses ferrielectric ordering due to the intrinsic ferroelectric size effect. Intralayer heterostructures can be formed, destroyed, and re-formed by thermal cycling, thus enabling the possibility of finely tuned ferroic structures that can potentially be optimized for specific device architectures.

The metal-organic framework NU-1000, with Zr-oxo, hydroxo, and aqua nodes, was modified by incorporation of hydroxylated Al(iii) ions by ALD-like chemistry with [Al(CH)(iso-propoxide)] followed by steam (ALD = atomic layer deposition). Al ions were installed to the extent of approximately 7 per node. Single-site iridium diethylene complexes were anchored to the nodes of the modified and unmodified MOFs by reaction with Ir(CH)(acac) (acac = acetylacetonate) and converted to Ir(CO) complexes by treatment with CO. Infrared spectra of these supported complexes show that incorporation of Al weakened the electron donor tendency of the MOF. Correspondingly, the catalytic activity of the initial supported iridium complexes for ethylene hydrogenation increased, as did the selectivity for ethylene dimerization. The results of density functional theory calculations with a simplified model of the nodes incorporating Al(iii) ions are in qualitative agreement with some catalyst performance data.

No abstract

Metal−organic frameworks (MOFs) have potential applications for efficient filtration of toxic gases from ambient air. We have used computational methods to examine the efficacy of functionalized UiO-66 with a wide range of functional groups to identify materials suitable for selective adsorption of NH 3 , H 2 S, or CO 2 under humid conditions. To this end, adsorption energies at various favorable positions in the structures are obtained from both clusterbased and periodic models. Our cluster calculations show that DFT calculations using the PBE-D2 functional can reliably predict the ranking of materials obtained at the MP2 level. Performing PBE-D2 calculations using periodic models gives rankings of materials that are significantly different from those of cluster calculations, showing that confinement effects are important in these materials. On the basis of these calculations, recommendations for high performing materials are made using PBE-D2 calculations from periodic models that use the full structure of each MOF.

Density functional theory (DFT) based force fields (FFs) for Ar and Xe adsorption in M-MOF-74 (M = Co, Ni, Zn, Mg), ZIF-8 and HKUST-1 were developed using three DFT functionals (PBE-D2, vdW-DF, vdW-DF2) in periodic systems.