No abstract

Slurryless electrochemical mechanical polishing (ECMP) is very effective in the polishing of silicon carbide (SiC) wafers. To achieve a high material removal rate (MRR) of SiC wafer using ECMP with low electrical energy loss, charge utilization efficiency in the anodic oxidation of the SiC surface was investigated and the underlying mechanism was clarified by modeling the anodic oxidation system of SiC in 1 wt% NaCl aqueous solution. The charge utilization efficiency in the anodic oxidation of SiC was found to be constant when the current density was less than 20 mA/cm2 and significantly decreased when the current density was greater than 30 mA/cm2, resulting in a significant reduction in the MRR. Modeling of the anodic oxidation system indicates that the charge utilization efficiency depended on the potential applied on the SiC surface: the oxidation of SiC occupied the dominant position in the anodizing system when the potential is lower than 25 V vs Ag|AgCl, charge utilization efficiency greatly decreased when the applied potential was greater than 25 V owing to the occurrence of oxidations of the H2O and Cl-. This research provides both a theoretical and practical foundation for using ECMP to polish SiC wafers.