Thin TiO2 films are demonstrated to be an excellent electron-selective contact for crystalline silicon solar cells. An efficiency of 21.6% is achieved for crystalline silicon solar cells featuring a full-area TiO2 -based electron-selective contact.

We report on the fabrication and characterization of solar blind photodetectors (SBPs) based on undoped β‐Ga2O3 and Zn doped (∼5 × 1020 cm−3) β‐Ga2O3 (ZnGaO) epitaxial films with cutoff wavelength of ∼260 nm. The epilayers were grown on c‐sapphire by the metal organic chemical vapor deposition technique and their structural, electrical and optical properties were characterized using various methods. As grown films have a large number of defects, resulting in detectors with enhanced internal gain, hence, high spectral responsivity >103 A/W. Post growth annealing in oxygen improved the quality of the epilayers, leading to detectors with reduced dark current (∼nA to ∼pA) and increased out of band rejection ratio. At 20 V bias, a ZnGaO detector showed a peak responsivity of 210 A/W (at 232 nm) and an out of band rejection ratio (i.e., R232 nm/R320 nm) of 5 × 104. Alternatively, for a β‐Ga2O3 detector these parameters were found to be five times and three times lower, respectively, suggesting that ZnGaO detectors have superior performance characteristics. These results provide a roadmap toward achieving high responsivity SBPs based on epitaxial ZnGaO films, laying a solid foundation for future applications.

No abstract

In this study, the cross-section of electron-selective titanium oxide (TiO2) contacts for n-type crystalline silicon solar cells were investigated by transmission electron microscopy. It was revealed that the excellent cell efficiency of 21.6% obtained on n-type cells, featuring SiO2/TiO2/Al rear contacts and after forming gas annealing (FGA) at 350°C, is due to strong surface passivation of SiO2/TiO2 stack as well as low contact resistivity at the Si/SiO2/TiO2 heterojunction. This can be attributed to the transformation of amorphous TiO2 to a conducting TiO2-x phase. Conversely, the low efficiency (9.8%) obtained on cells featuring an a-Si:H/TiO2/Al rear contact is due to severe degradation of passivation of the a-Si:H upon FGA.

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.