In the process of promoting school aesthetic education, some schools have some problems, such as insufficient construction of campus aesthetic education environment, lack of aesthetic thinking in various disciplines, and so on. In view of these problems, combined with the concept of the flipped classroom and the characteristics of artificial intelligence task-driven teaching, taking PHP, HTML + CSS + JS, and other development technologies as the main development technologies, and relying on the flipped classroom teaching mode of network learning space, this paper constructs an artificial intelligence core course website as a teaching platform for graduate teaching and undergraduate extended learning. The platform seeks the optimal solution of multiple combination optimization based on a genetic algorithm effectively improves the teaching quality of artificial intelligence courses and students’ learning efficiency.
Ti-48Al-2Mn-2Nb alloy was produced by “centrifugal spray deposition” (CSD), and then hot isostatic pressing (HIP) was employed to remove the porosity formed by CSD. The effects of CSD and HIP processing on the mechanical properties and microstructure of the TiAl alloy were investigated. The results show that the CSD and HIP processing can both improve the strength, plasticity of the TiAl alloy, and the tensile elongation values of the CSD or HIP samples are around
3%, which are better than those of as-cast TiAl alloys in room temperature. Especially, they show more excellent compressive properties at ambient temperature with a compressive ratio of 33.8% and compressive strength of 2210MPa for the CSD samples, and a compressive ratio of 37.8% and compressive strength of 2348MPa for the HIP samples. The CSD processing also improves the
fracture toughness of TiAl alloy, which is much higher than that of the HIP processing, while the HIP processing seems to be beneficial the ductility and plasticity as having a duplex structure. The effects of CSD and HIP processing on microstructure and properties of TiAl alloys are discussed to understand the deformation and fracture process of the alloy.
The spreading kinetics of Herschel-Bulkley fluids on horizontal solid substrates were theoretically studied. The equations of film thickness were derived in both gravitational and capillary regimes. The dynamic contact angle for the capillary regime was also derived. Finally, a limiting result for the case of τ0 = 0 was obtained, which was compared with the known solution for validation. The results show that the yield behavior of the fluids had a significant impact on the spreading kinetics in both cases. Only when stress was larger than the yield stress, would substantial flow occur. The spreading zone was divided into two parts by the yield surface: sheared zone and yield zone, which was completely different from common Newtonian fluids or power-law fluids. The thickness of the yield zone mainly depended on yield stress and pressure gradient along the z-direction. According to the final evolution, both the film thickness and dynamic contact angle were affected not only by the power-law index but also by the yield behavior.
The ceramic microchannel manufactured by stereolithography (SLA) can be used in many engineering cases. SLA is an accurate 3D printing technology, while the small geometry error is inevitable. The involved flow is always non-Newtonian fluids. Therefore, it is necessary to analyze Bingham fluids flow in the ceramic microchannel with geometry errors. To conduct the numerical simulations, a modified lattice Boltzmann (LB) model is presented. Then, the good consistency between the theoretical and numerical solutions demonstrates the effectiveness of the improved method. The required cases are analyzed by using the proposed method. Both the streamlines and outlet velocity distribution show that the geometry error increases the outlet velocity. The Bingham parameters are important factors in the flow of the microchannel.
Digital light processing (DLP) can be used to form HAP/ZrO2 mixed ceramic slurry. In the printing technology, the scraper geometry has an important effect on the scraping process; thus, it is necessary to conduct analysis. A modified lattice Boltzmann method (LBM) is proposed to conduct the numerical simulations according to the non-Newtonian behavior of the slurry. The Cross behavior of the slurry is viewed as a special external force; then, the traditional LBM including the true external force can be utilized effectively. The triangle, rectangle, trapezium, and rounded rectangle are the main considered section geometries of the scraper. When the flow velocity is set to 0.1 m/s, the results show that the maximum velocity occurs near the bottom surface of the scraper. In four situations, the velocity peak of the triangle case is 0.6270 m/s, which is the maximum, and much larger than the flow velocity of 0.1 m/s. The velocity peak of the rectangle case is 0.0466 m/s, which is the minimum. Although the velocity peak of the rounded rectangle case is 0.0556 m/s, the second velocity peak is 0.0465 m/s; the difference is smaller than that of the rectangle case. In addition, the streamlines figures show that the sharp corner leads to the obvious velocity change. In summary, the rounded rectangle is considered to be more suitable for scraping the HAP/ZrO2 mixed slurry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.