The world is evolving toward a circular economy, which focuses on decreasing waste and extending the life of commodities. This work suggests using waste of glass to prepare composite. Epoxy was reinforced 50% by weight using waste glass. At room temperature were prepared samples reinforced and unreinforced and immersed in five solutions (HCl, Water, NaOH, Kerosene and Benzene) for four weeks, to find out the resistance of the epoxy after reinforcing. It is found that reinforced samples have resistance of increased after immersion in corrosive media comparison pure epoxy and it was obvious that the hardness were modified by 57% and remain constant during the immersion period in solutions. After immersing specimens in HCl the weight of the specimens decreases by 3.6%, unlike other solutions the weight of the specimens’ increase. Indicating that epoxy gains resistance after being reinforced with glass waste, allowing it to be used in a variety of applications.
The world is evolving toward extending the life of commodities and decreasing waste by recycling. The purpose of this study is to improve resistance of epoxy against the corrosive conditions by reinforcing it with available chemically resistant and low cost materials. Selection of Glass wastes to reinforce epoxy with 50% by weight. Preparation of four sets of samples for this purpose, two sets of samples make and cure at room temperature, while the others cure at 50°C for two hours. Each set make up of both reinforced and unreinforced epoxy. Immersion of these samples in different environment (Water, NaOH, HCl, Benzene and Kerosene) to find out the resistance of the epoxy after reinforcing. After immersion for six months, it is found that the composite seems more resistance compared to matrix material alone. Composites reinforced by glass particles show an increase in mechanical properties when compared to elegant epoxy resin. Density, Vickers hardness and Modulus of elasticity values increased by (31%, 67% and 62%) respectively for composite at room temperature. Improvement of the resistance after the post curing of unreinforced and reinforced epoxy. The solutions that have highest effect for unreinforced samples at room temperature are (HCl and Water). This indicates that epoxy acquire resistance after reinforcing with glass waste which enables it to be utilize in different applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.