Fly ash is commonly deposited in special landfills as it contains toxic concentrations of heavy metals, such as Zn, Pb, Cd, and Cu. This study was inspired by our efforts to detoxify fly ash from municipal solid waste incineration by thermal treatment to produce secondary raw materials suited for reprocessing. The potential of the thermal treatment was studied by monitoring the evaporation rate of zinc from a certified fly ash (BCR176) during heating between 300 and 950 degrees C under different carrier gas compositions. Samples were quenched at different temperatures for subsequent investigation with X-ray absorption spectroscopy (XAS). The XAS spectra were analyzed using principal component analysis (PCA), target transformation (TT), and linear combination fitting (LCF) to analyze the major Zn compounds in the fly ash as a function of the temperature. The original fly ash comprised about 60% zinc oxides mainly in the form of hydrozincite (Zn5(OH)6(CO3)2) and 40% inerts like willemite (Zn2SiO4) and gahnite (ZnAl2O4) in a weight ratio of about 3:1. At intermediate temperatures (550-750 degrees C) the speciation underlines the competition between indigenous S and Cl with solid zinc oxides to form either volatile ZnCl2 or solid ZnS. ZnS then transformed into volatile species at about 200 degrees C higher temperatures. The inhibiting influence of S was found absent when oxygen was introduced to the inert carrier gas stream or chloride-donating alkali salt was added to the fly ash.

No abstract

Sterols, triterpene alcohols, and hydrocarbons present in the unsaponifiable fraction of some underutilized tropical seed oils have been examined. The seeds include Telfairia occidentalis (TLO), Andenopus breviflorus (ADB), Cucumeropsis edulis (CME), Antiaris africana (ATF), and Monodora tenuifolia (MNT). The oil content of the seeds was high (34.7-68.8%), whereas triacylglycerols comprised the dominant lipid group in the oils (65.4-73.9%). The percentage of unsaponifiables ranged from 1.1 to 7.9%. Ten sterols were identified in the fractions. In the Cucurbitaceae oils (TLO, CME, and ADB), Delta(7)-sterols constituted the dominant sterols. These include 24-ethylcholesta-7,22E,25-trienol (7), 24-ethylcholesta-7,25-dienol (9), 24Z-ethylidenecholes-7-enol (10), and 24-ethylcholesta-7, 24-dienol (11). However Delta(5)-sterols (1-5) occurred at the highest concentration in the other two samples (ATF and MNT). Fifteeen triterpene alcohols were detected in the fractions. Olean-12-enol (16), isomultiflorenol (8), and lupeol (23) were the dominant alcohols in the Cucurbitaceae family, whereas alpha-amyrin (urs-12-enol) (20) was the dominant triterpene alcohol in ATF and MNT. A mixture of C(18)-C(34) n-alkanes, squalene, and some monoterpenes was detected in the hydrocarbon fraction.

No abstract

"Thermal desorption experiments" were carried out during which heavy metal evaporation was studied by on-line monitoring. This could be achieved by the use of a tubular furnace connected to a heavy metal detector, i.e. an ICP-OES (inductively coupled plasma optical emission spectrometer), by a specially designed and patented interface. The spectrograms typically had a time resolution of four different elements per minute using a conventional (sequentially operating) ICP-OES. This study shows how thermo-desorption spectrometry (TDS) can be applied to study the evaporation of high boiling substances, such as heavy metal and alkali metal compounds. The future scope of the method is discussed.