Pervious concrete (PC), as an environmental friendly material, can be very important in solving urban problems and mitigating the impact of climate change; i.e., flooding, urban heat island phenomena, and groundwater decline. The objective of this research is to evaluate the strength, permeability, and freeze-thaw durability of PC with different aggregate sizes, porosities, and water-binder ratios. The orthogonal experiment method is employed in the study and nine experiments are conducted. The compressive strength, flexural strength, permeability coefficient, porosity, density, and freeze-thaw durability of PC mixtures are tested. Range analysis and variance analysis are carried out to analyze the collected data and estimate the influence of aggregate size, porosity, and water-binder ratio on PC properties. The results indicate that porosity is the most important factor determining the properties of PC. High porosity results in better permeability, but negatively affects the mechanical strength and freeze-thaw durability. PC of 15% porosity can obtain high compressive strength in excess of 20 MPa and favorable freeze-thaw durability of 80 cycles without sacrificing excessive permeability. Aggregate size also has a significant effect on freeze-thaw durability and mechanical strength. Small aggregate size is advantageous for PC properties. PC with 4.75-9.5 mm coarse aggregate presents excellent freeze-thaw durability. The influence of the water-binder ratio on PC properties is not as significant as that of aggregate size and porosity. An optimal mix ratio is required to trade-off between permeability, mechanical strength, and freeze-thaw durability.functionally and environmentally friendly material [9]. It allows rainwater to permeate into the ground and replenish groundwater, which effectively alleviates the rapid decline of groundwater. In addition, PC pavement can solve other urban environmental problems [10][11][12]. With the development of Chinese sponge city construction, PC will be widely applied in road structure [13]. Therefore, PC is of great significance for mitigating climate change, solving urban problems, and promoting the development of human society [14][15][16].The main properties of PC are strength, permeability, and durability. A porous structure is the key feature of PC, and porosity is the most important factor influencing mechanical strength, permeability, and durability. In general, the porosity of PC mixtures is 15-30% and the corresponding permeability coefficient lies in the range of 1-15 mm/s [17,18]. Higher porosity produces higher permeability, but is disadvantageous to mechanical strength and durability. Due to the absence of fine aggregate and the existence of high porosity, the strength of PC is lower than that of traditional impervious concrete. The compressive strength of PC is 5-30 MPa and tensile strength is 1. 20]. In addition, the freeze-thaw durability of PC is a very important property, especially for PC used in seasonally frozen regions. However, the freeze-thaw durability ...

Due to the negative effects that derive from large impervious surfaces in urban areas, pervious concrete has been developed, and has become an environmentally friendly pavement material. As a porous and permeable material, pervious concrete presents an overwhelming advantage in solving urban problems, such as flooding, groundwater decline, urban heat island phenomena, etc. Waste crumb rubber has been verified as a feasible modifier for pavement material. The objective of this paper is to explore the effects of rubber particle size and incorporation level on the permeability, mechanical properties, and freeze–thaw resistance of pervious concrete. Two kinds of rubbers (fine and coarse) with four incorporation levels (2%, 4%, 6%, and 8%) are used in the experiment. Permeability, compressive strength, flexural strength, flexural strain, and freeze–thaw resistance are tested. The results indicate that the addition of rubber slightly decreases strength and permeability, but significantly enhances ductility and freeze-thaw resistance. Fine crumb rubber with a suitable incorporation level could remarkably improve the ductility and freeze–thaw resistance of pervious concrete without sacrificing excessively strength and permeability.

Static and dynamic mechanical properties of concrete are affected by temperature effect in practice. Therefore, it is necessary to investigate the corresponding influence law and mechanism. This paper demonstrates the variation of mechanical properties of concrete at temperatures from −20°C to 60°C. Temperature effects on cube compressive strength, splitting tensile strength, prism compressive strength, modulus of elasticity, and frequency are conducted and discussed. The results indicate that static mechanical properties such as compressive strength (cube and prism), splitting tensile strength, and modulus of elasticity have highly linear negative correlation with temperature; this law is also applied to the first order frequency of concrete slab. The coupling effect of temperature and damage on change rate of frequency reveals that temperature effect cannot be ignored in damage identification of structure. Mechanism analysis shows that variation of elastic modulus of concrete caused by temperature is the primary reason for the change of frequency.

The prefabricated reinforced concrete (RC) hollow slab bridges, with the advantages of high quality, lower cost and shorter construction period, have been widely used for small-to-medium-span highway bridges in China. Because of environmental deterioration and traffic volume increases, the performance of the bridge system deteriorates gradually. Accurate bridge system evaluation can provide a reliable basis for maintenance and management. A bridge system is composed of multiple interrelated components, which makes the system reliability evaluation become a computationally intractable work. In this paper, an effective method was proposed to evaluate the system reliability of the prefabricated RC hollow slab bridge considering hinge joint damage based on the modified analytic hierarchy process (AHP). Considering the subjectivity of the traditional AHP method in constructing the judgment matrix, this paper proposed an objective construction method of the judgment matrix to modify the traditional AHP. The modified hinge plate method (MHPM) proposed by the previous research was utilized to analyze the effect of hinge joint damage on system reliability. In order to verify the applicability of the proposed system reliability evaluation method, a simply supported RC hollow slab bridge was selected as the case study and the system reliability indexes were compared with the traditional series and parallel methods. The results indicated that the traditional methods were either too conservative or too radical to objectively evaluate the actual system reliability level of the structure. In contrast, the proposed method in this paper was more suitable for evaluating the system reliability of such bridges, and more accurate in providing maintenance decision makers with a relatively reasonable bridge condition information.

Pervious concretes, as sustainable pavement materials, have great advantages in addressing a number of environmental issues. Fly ash, as the industrial by-product waste, is the most commonly used as cement substitute in concrete. The objective of this paper is to study the effects of waste fly ash on properties of pervious concrete. Fly ash was used to replace cement with equivalent volume method at different levels (3%, 6%, 9%, and 12%). The control pervious concrete and fly ash modified pervious concrete were prepared in the laboratory. The porosity, permeability, compressive strength, flexural strength, and freeze–thaw resistance of all mixtures were tested. The results indicated that the addition of fly ash decreased the early-age (28 d) compressive strength and flexural strength, but the long-term (150 d) compressive strength and flexural strength of fly ash modified pervious concrete were higher than that of the early-age. The adverse effect of fly ash on freeze–thaw resistance of pervious concrete was observed when the fly ash was added. The porosity and permeability of all pervious concrete mixtures changed little with the content of fly ash due to the use of equal volume replacement method. Although fly ash is not positive to the properties of pervious concrete, it is still feasible to apply fly ash as a substitute for cement in pervious concrete.