Multilayered Au nanosheets are suggested as a novel class of material for fabricating stretchable electrodes suitable for organic-based electronic devices. The electrodes show no difference in resistivity during repeated stretching cycles of up to ϵ = 40%.

No abstract

No abstract

Paper‐based electronics has attracted growing interest owing to many advantages of papers including low‐cost, abundance, flexibility, biocompatibility, and environmental friendliness. Despite recent progress in paper electronics, however, development of a high‐performance paper‐based triboelectric nanogenerator (TENG), which is a power‐generating device that converts mechanical energy into electric energy by coupling triboelectrification and electrostatic induction, remains a challenge mainly due to weak electron‐donating tendency of cellulose‐based papers. In this work, highly conductive ferroelectric cellulose composite papers containing silver nanowires and BaTiO3 nanoparticles are fabricated, and their successful application for realizing a large‐area TENG with enhanced electrical output performance is demonstrated. It is found that triboelectric charge generation on the ferroelectric cellulose composite paper can be promoted by simple poling treatment, which significantly enhances TENG performance. The ferroelectric cellulose composite paper–based TENG exhibits an electrical output performance that surpasses those of aluminum‐based and pristine cellulose–based TENGs by more than two times, as well as outstanding output stability without a noticeable degradation in performance during 10 000 cycles of a repeated pushing test. The work demonstrates the great potential of multifunctional cellulose‐based papers for TENG and other self‐powered electronic applications.

We report highly sensitive, tunable, and durable strain sensors based on a simple structure consisting of a multilayered film of gold (Au) nanosheets as a sensing layer on a highly stretchable Ecoflex substrate.

Silver (Ag) nanowires (NWs) are promising building blocks for flexible transparent electrodes, which are key components in fabricating soft electronic devices such as flexible organic light emitting diodes (OLEDs). Typically, Ag NWs have been synthesized using a polyol method, but it still remains a challenge to produce high-aspect-ratio Ag NWs via a simple and rapid process. In this work, we developed a modified polyol method and newly found that the addition of propylene glycol to ethylene glycol-based polyol synthesis facilitated the growth of Ag NWs, allowing the rapid production of long Ag NWs with high aspect ratios of about 2000 in a high yield (∼90%) within 5 min. Transparent electrodes fabricated with our Ag NWs exhibited performance comparable to that of an indium tin oxide-based electrode. With these Ag NWs, we successfully demonstrated the fabrication of a large-area flexible OLED with dimensions of 30 cm × 15 cm using a roll-to-roll process.

The polyol reduction of a Ag precursor in the presence of an organic stabilizer, such as poly(vinylpyrrolidone), is a widely used method for the production of Ag nanowires (NWs). However, organic capping molecules introduce insulating layers around each NW. Herein we demonstrate that Ag NWs can be produced in high yield without any organic stabilizers simply by introducing trace amounts of NaCl and Fe(NO3 )3 during low-temperature polyol synthesis. The heterogeneous nucleation and growth of Ag NWs on initially formed AgCl particles, combined with oxidative etching of unwanted Ag nanoparticles, resulted in the selective formation of long NWs with an average length of about 40 μm in the absence of a capping or stabilizing effect provided by surface-adsorbing molecules. These organic-stabilizer-free Ag NWs were directly used for the fabrication of high-performance transparent or stretchable electrodes without a complicated process for the removal of capping molecules from the NW surface.

The introduction of inorganic nanoparticles into carbon nanotube (CNT) papers can provide a versatile route to the fabrication of CNT papers with diverse functionalities, but it may lead to a reduction in their mechanical properties. Here, we describe a simple and effective strategy for the fabrication of mechanically robust magnetic CNT papers for electromagnetic interference (EMI) shielding and magnetomechanical actuation applications. The magnetic CNT papers were produced by vacuum filtration of an aqueous suspension of CNTs, CoFeO nanoparticles, and poly(vinyl alcohol) (PVA). PVA plays a critical role in enhancing the mechanical strength of CNT papers. The magnetic CNT papers containing 73 wt % of CoFeO nanoparticles exhibited high mechanical properties with Young's modulus of 3.2 GPa and tensile strength of 30.0 MPa. This magnetic CNT paper was successfully demonstrated as EMI shielding paper with shielding effectiveness of ∼30 dB (99.9%) in 0.5-1.0 GHz, and also as a magnetomechanical actuator in an audible frequency range from 200 to 20 000 Hz.