Weak protein-nanoparticle (NP) interactions are studied in a low binding regime as a model for the soft protein corona around nanoparticles in complex biological fluids. Noncovalent, reversible interactions between Subtilisin Carlsberg (SC) and silica NPs shows significant alteration in conformation and enzymatic activity in a NP-size dependent manner. Very weak interactions between SC and silica NPs were revealed by centrifugation-based separations and further supported by small-angle X-ray scattering, while bovine serum albumin was used as a strongly interacting reference. Secondary and tertiary structure changes of SC were studied via circular dichroism and correlated to enzymatic activity where the enzyme kinetics showed a critical role for nanoparticle size.

The encapsulation and release of peptides, proteins, nucleic acids, and drugs in nanostructured lipid carriers depend on the type of the self-assembled liquid-crystalline organization and the structural dimensions of the aqueous and membraneous compartments, which can be tuned by the multicomponent composition of the systems. In this work, small-angle X-ray scattering (SAXS) investigation is performed on the 'melting' transition of the bicontinuous double diamond cubic phase, formed by pure glycerol monooleate (MO), upon progressive inclusion of varying fractions of pharmaceutical-grade glycerol monooleate (GO) in the hydrated system. The self-assembled MO/GO mixtures are found to form diamond (Pn3m) inverted cubic, inverted hexagonal (H(II)), and sponge (L(3)) phases at ambient temperature in excess of aqueous medium without heat treatment. Mixing of the inverted-cubic-phase-forming MO and the sponge-phase-forming GO components, in equivalent proportions (50/50 w/w), yields an inverted hexagonal (H(II)) phase nanostructured carrier. Scattering models are applied for fitting of the experimental SAXS patterns and identification of the structural changes in the aqueous and lipid bilayer subcompartments. The possibility of transforming, at ambient temperature (20 °C), the bicontinuous cubic nanostructures into inverted hexagonal (H(II)) or sponge (L(3)) mesophases may facilitate novel biomedical applications of the investigated liquid crystalline self-assemblies.

Despite over a century of modern surfactant science, the kinetic pathways of morphological transitions in micellar systems are still not well understood. This is mainly as a result of the lack of sufficiently fast methods that can capture the structural changes of such transitions. Herein, a simple surfactant system consisting of sodium dodecyl sulfate (SDS) in aqueous NaCl solutions is investigated. Combining synchrotron radiation small-angle X-ray scattering (SAXS) with fast stopped-flow mixing schemes allows monitoring the process where polymer-like micelles are formed from globular micelles when the salt concentration is suddenly increased. The results show that "worm-like" micelles are formed by fusion of globular micelles and short cylinders in a fashion that bears similarities to a step-like polymerization process.

The formation and growth of titania (anatase) nanoparticles in benzyl alcohol from TiCl4 was studied in situ at 85 °C via powder X-ray diffraction (PXRD), small-angle X-ray scattering (SAXS), and turbidimetry. The results provide new information on the kinetics of this process and allow for better control of particle size, shape, and aggregation. Rietveld refinement of ex situ PXRD data shows that the final crystals are anisotropic in shape and elongated along the crystallographic c-axis. In situ SAXS and PXRD show that the crystals form suddenly after a lag period. The crystals are initially isotropic in shape and the growth is isotropic; thereafter, the growth proceeds predominantly along the crystallographic c-axis to form anisotropic crystals, in agreement with the ex situ PXRD results. The relative lattice strain, which is determined as the lattice deformation relative to the lattice constants found late in the growth process, is positive along the c-axis and negative, but smaller, along the a-axis. In both directions, the strain relaxes as the particles grow. The strain anisotropy, measured as c/a, relaxes to the bulk value for particles with an equivalent linear dimension on the order of 4.5 nm. The present data provide the first strain information in anisotropic particles smaller than ∼5 nm. The large anisotropic strain is related to the important out-of-plane contributions to the surface energy resulting from selective ligand binding to the surfaces. In situ SAXS shows that the particles initially form small aggregates that can be modeled as either spheres or surface fractals. The aggregate radius of gyration shows a linear growth for both models. At long growth times, the turbidity suddenly increases, because of the occurrence of large-scale aggregation. The onset time follows Arrhenius behavior with an effective activation energy of 106.7 kJ/mol. The large scale aggregation is also reflected in the in situ SAXS data as the point after which the aggregate size accelerates and the aggregates can only be described as volume fractals. These types of sol−gel syntheses are typically stopped after the large-scale aggregation; however, according to the present work, discrete or only slightly aggregated nanoparticles are present at a much earlier stage.

Adding small amounts of ring polymers to a matrix of their linear counterparts is known to increase the zeroshear-rate viscosity because of linear-ring threading. Uniaxial extensional rheology measurements show that, unlike its pure linear and ring constituents, the blend exhibits an overshoot in the stress growth coefficient. By combining these measurements with ex-situ small angle neutron scattering and nonequilibrium molecular dynamics simulations, this overshoot is shown to be driven by a transient threading-unthreading transition of rings embedded within the linear entanglement network. Prior to unthreading, embedded rings deform affinely with the linear entanglement network and produce a measurably stronger elongation of the linear chains in the blend compared to the pure linear melt. Thus, rings uniquely alter the mechanisms of transient elongation in linear polymers.

A novel and generally applicable method for determining structures of membrane proteins in solution via small-angle neutron scattering (SANS) is presented. Common detergents for solubilizing membrane proteins were synthesized in isotope-substituted versions for utilizing the intrinsic neutron scattering length difference between hydrogen and deuterium. Individual hydrogen/deuterium levels of the detergent head and tail groups were achieved such that the formed micelles became effectively invisible in heavy water (D O) when investigated by neutrons. This way, only the signal from the membrane protein remained in the SANS data. We demonstrate that the method is not only generally applicable on five very different membrane proteins but also reveals subtle structural details about the sarco/endoplasmatic reticulum Ca ATPase (SERCA). In all, the synthesis of isotope-substituted detergents makes solution structure determination of membrane proteins by SANS and subsequent data analysis available to nonspecialists.

The increasingly narrow and brilliant beams at X-ray facilities reduce the requirements for both sample volume and data acquisition time. This creates new possibilities for the types and number of sample conditions that can be examined but simultaneously increases the demands in terms of sample preparation. Microfluidic-based sample preparation techniques have emerged as elegant alternatives that can be integrated directly into the experimental X-ray setup remedying several shortcomings of more traditional methods. We review the use of microfluidic devices in conjunction with X-ray measurements at synchrotron facilities in the context of 1) mapping large parameter spaces, 2) performing time resolved studies of mixing-induced kinetics, and 3) manipulating/processing samples in ways which are more demanding or not accessible on the macroscale. The review covers the past 15 years and focuses on applications where synchrotron data collection is performed in situ, i.e. directly on the microfluidic platform or on a sample jet from the microfluidic device. Considerations such as the choice of materials and microfluidic designs are addressed. The combination of microfluidic devices and measurements at large scale X-ray facilities is still emerging and far from mature, but it definitely offers an exciting array of new possibilities.

Self-assembly of amphiphilic molecules into micelles occurs on very short times scales of typically some milliseconds, and the structural evolution is therefore very challenging to observe experimentally. While rate constants of surfactant micelle kinetics have been accessed by spectroscopic techniques for decades, so far no experiments providing detailed information on the structural evolution of surfactant micelles during their formation process have been reported. In this work we show that by applying synchrotron small-angle X-ray scattering (SAXS) in combination with the stopped-flow mixing technique, the entire micelle formation process from single surfactants to equilibrium micelles can be followed in situ. Using a sugar-based surfactant system of dodecyl maltoside (DDM) in dimethylformamide (DMF), micelle formation can be induced simply by adding water, and this can be followed in situ by SAXS. Mixing of water and DMF is an exothermic process where the micelle formation process occurs under nonisothermal conditions with a temperature gradient relaxing from about 40 to 20 °C. A kinetic nucleation and growth mechanism model describing micelle formation by insertion/expulsion of single molecules under nonisothermal conditions was developed and shown to describe the data very well.