Contrary to its currently known characteristics, the nocturnal boundary layer over the Great Plains is frequently populated with a variety of turbulence-producing phenomena. C ASES-99 considers four scientific questions primarily related to the stable, nocturnal boundary layer, including the transition periods. The CASES-99 field program attempted to identify the sources and to quantify the physical characteristics of atmospheric phenomena occurring from the formative stages of the NBL 1 until its eventual breakup during the morning transition. The follow-up pro-1 Acronyms not defined in the text are defined in the appendix.

Two-dimensional simulations of the 11 January 1972 Boulder, Colorado, windstorm, obtained from 11 diverse nonhydrostatic models, are intercompared with special emphasis on the turbulent breakdown of topographically forced gravity waves, as part of the preparation for the Mesoscale Alpine Programme field phase. The sounding used to initialize the models is more representative of the actual lower stratosphere than those applied in previous simulations. Upper-level breaking is predicted by all models in comparable horizontal locations and vertical layers, which suggests that gravity wave breaking may be quite predictable in some circumstances. Characteristics of the breaking include the following: pronounced turbulence in the 13-16-km and 18-20-km layers positioned beneath a critical level near 21-km, a well-defined upstream tilt with height, and enhancement of upper-level breaking superpositioned above the low-level hydraulic jump. Sensitivity experiments indicate that the structure of the wave breaking was impacted by the numerical dissipation, numerical representation of the horizontal advection, and lateral boundary conditions. Small vertical wavelength variations in the shear and stability above 10 km contributed to significant changes in the structures associated with wave breaking. Simulation of this case is ideal for testing and evaluation of mesoscale numerical models and numerical algorithms because of the complex wave-breaking response.

Abstract. Using detailed upwind and nacelle-based measurements from a General Electric (GE) 1.5sle model with a 77 m rotor diameter, we calculate power curves and annual energy production (AEP) and explore their sensitivity to different atmospheric parameters to provide guidelines for the use of stability and turbulence filters in segregating power curves. The wind measurements upwind of the turbine include anemometers mounted on a 135 m meteorological tower as well as profiles from a lidar. We calculate power curves for different regimes based on turbulence parameters such as turbulence intensity (TI) as well as atmospheric stability parameters such as the bulk Richardson number (R B ). We also calculate AEP with and without these atmospheric filters and highlight differences between the results of these calculations. The power curves for different TI regimes reveal that increased TI undermines power production at wind speeds near rated, but TI increases power production at lower wind speeds at this site, the US Department of Energy (DOE) National Wind Technology Center (NWTC). Similarly, power curves for different R B regimes reveal that periods of stable conditions produce more power at wind speeds near rated and periods of unstable conditions produce more power at lower wind speeds. AEP results suggest that calculations without filtering for these atmospheric regimes may overestimate the AEP. Because of statistically significant differences between power curves and AEP calculated with these turbulence and stability filters for this turbine at this site, we suggest implementing an additional step in analyzing power performance data to incorporate effects of atmospheric stability and turbulence across the rotor disk.

No abstract

No abstract

A lee-wave–rotor system interacting with an approaching cold front in the lee of Pike’s Peak near Colorado Springs, Colorado, on 1 April 1997 is studied observationally and numerically. Dynamical effects associated with the approaching cold front caused the amplification of the evolving lee wave and rotor, creating increasingly more hazardous flight conditions for nearby airports. The rapidly evolving winds measured by a Doppler lidar and 915-MHz wind profilers, and simulated by the Regional Atmospheric Modeling System (RAMS), produced light-to-moderate turbulence for a research aircraft making missed approaches at the Colorado Springs Airport during the wave amplification phase. As the cold front approached the foothills, the lee-wave–rotor system ended abruptly, reducing hazardous flight conditions. The Doppler lidar’s detailed measurements of the lee-wave–rotor system allowed for an evaluation of RAMS ability to capture these complex wind features. Qualitative and quantitative comparisons between the lidar range–height measurements and model x–z cross sections are presented. In a broad sense, the numerical simulations were successful in the prediction of the prefrontal amplification and the postfrontal decay of the waves as measured by the lidar. RAMS also predicted observed wind reversals above the lee waves, which were indicators of breaking wave instability. At times RAMS performed poorly by over- or underpredicting the wind speeds in the lee wave, as well as the horizontal extent of the lee wave or rotor.

This paper describes the development of the Cooperative Atmosphere Surface Exchange Study (CASES), its synergism with the development of the Atmosphere Boundary Layer Experiments (ABLE) and related efforts, CASES field programs, some early results, and future plans and opportunities. CASES is a grassroots multidisciplinary effort to study the interaction of the lower atmosphere with the land surface, the subsurface, and vegetation over timescales ranging from nearly instantaneous to years. CASES scientists developed a consensus that observations should be taken in a watershed between 50 and 100 km across; practical considerations led to an approach combining long-term data collection with episodic intensive field campaigns addressing specific objectives that should always include improvement of the design of the long-term instrumentation. In 1997, long-term measurements were initiated in the Walnut River Watershed east of Wichita, Kansas. Argonne National Laboratory started setting up the ABLE array. The first of the long-term hydrological enhancements was installed starting in May by the Hydrologic Science Team of Oregon State University. CASES-97, the first episodic field effort, was held during April-June to study the role of surface processes in the diurnal variation of the boundary layer, to test radar precipitation algorithms, and to define relevant scaling for precipitation and soil properties. The second episodic experiment, CASES-99, was conducted during October 1999, and focused on the stable boundary layer. Enhancements to both the atmospheric and hydrological arrays continue. The data from and information regarding both the long-term and episodic experiments are available on the World Wide Web. Scientists are invited to use the data and to consider the Walnut River Watershed for future field programs.

Detailed airborne and ground-based measurements, including radar and stereocamera data, were collected over an isolated mountain in Arizona to study the dynamics of cumulus clouds evolving from shallow to deep convection.