The results show a significant dependence of the skin surface topography on the age of the volunteer and the body site measured. Particularly the waviness, the Fourier analysis and the furrow profiles reflect such dependencies. The system used also fulfils the requirements for the testing of therapies, as was demonstrated by the reduction of mimic wrinkles after treatment with botulinum Toxin A.

The fast, contact-free and highly precise shape measurement of technical objects is of key importance in the scientific-technological area as well as the area of practical measurement technology. The application areas of contact-free surface measurement extend across widely different areas, e.g., the automation of production processes, the measurement and inspection of components in microsystem technology or the fast 3D in-vivo measurement of human skin surfaces in cosmetics and medical technology. This paper describes methodological and technological possibilities as well as measurement technology applications for fast optical 3D shape measurements using micromirror-based high-velocity stripe projection. Depending on the available projector and camera facilities, it will be possible to shoot and evaluate complete 3D surface profiles within only a few milliseconds.

Since the mid-eighties, a fundamental idea for achieving measuring accuracy in projected fringe technology was to consider the projected fringe pattern as an interferogram and evaluate it on the basis of advanced algorithms widely used for phase measuring in real-time interferometry. A fundamental requirement for obtaining a sufficiently high degree of measuring accuracy with this so-called "phase measuring projected fringe technology" is that the projected fringes, analogous to interference fringes, must have a cos²-shaped intensity distribution. Until the mid-nineties, this requirement for the projected fringe pattern measurement technology presented a basic handicap for its wide application in 3D metrology. This situation changed abruptly, when in the nineties Texas Instruments introduced to the market advanced digital light projection on the basis of micro mirror based projection systems, socalled DLP technology, which also facilitated the generation and projection of cos²-shaped intensity and/or fringe patterns. With this DLP technology, which from its original approach was actually oriented towards completely different applications such as multimedia projection, Texas Instruments boosted phase-measuring fringe projection in optical 3D metrology to a worldwide breakthrough both for medical as well as industrial applications. A subject matter of the lecture will be to present the fundamental principles and the resulting advantages of optical 3D metrology based on phase-measuring fringe projection using DLP technology. Further will be presented and discussed applications of the measurement technology in medical engineering and industrial metrology.

The skin is not only the largest organ of the human body, but it is also a barrier to the environment. The major part of the human skin is in constant contact with textile materials. The objective of this study was to characterize textile materials and to investigate their influence on the skin properties. For this purpose, two different textile materials (polyamide and polyester) were objectively characterized by optical coherence tomography and surface structure 3D-profilometry. In addition, subjective textile properties like haptic sensation and stiffness, as tactile characteristics felt by volunteers, were analyzed. The objective textile characteristics and subjective parameters were compared to the barrier properties measured by in vivo laser scanning microscopy . Comparable results were achieved between barrier properties and subjective assessment in relation to the textile characteristics in favor of the polyester fabric. Consequently, the optical method used in dermatology for the analysis of the skin can be applied to characterize and evaluate textile fabrics and their interaction with human skin in vivo.

The study showed that optical methods could be applied to compare textile materials in vitro, which permit the wearing comfort to be predicted and in vivo perception on the skin.