In recent years, the nanofluids (NFs) have become the main candidates for improving or even replacing traditional heat transfer fluids. The possibility of NFs to be used in various technological applications, from renewable energies to nanomedicine, has made NFs and their thermal conductivity one of the most studied topics nowadays. Hence, this review presents an overview of the most important advances and controversial results related to the NFs thermal conductivity. The different techniques used to measure the thermal conductivity of NFs are discussed. Moreover, the fundamental parameters that affect the NFs thermal conductivity are analyzed, and possible improvements are addressed, such as the increase of long-term stability of the nanoparticles (NPs).The most representative prediction classical models based on fluid mechanics, thermodynamics, and experimental fittings are presented. Also, the recent statistical machine learning-based prediction models are comprehensively addressed, and the comparison with the classical empirical ones is made, whenever possible.
In this study, a numerical approach was carried out to analyze the effects of different geometries of microchannel heat sinks on the forced convective heat transfer in single-phase flow. The simulations were performed using the commercially available software COMSOLMultiphysics 5.6®(Burlington, Massachusetts, United States) and its results were compared with those obtained from experimental tests performed in microchannel heat sinks of polydimethylsiloxane (PDMS). Distilled water was used as the working fluid under the laminar fluid flow regime, with a maximum Reynolds number of 293. Three sets of geometries were investigated: rectangular, triangular and circular. The different configurations were characterized based on the flow orientation, type of collector and number of parallel channels. The main results show that the rectangular shaped collector was the one that led to a greater uniformity in the distribution of the heat transfer in the microchannels. Similar results were also obtained for the circular shape. For the triangular geometry, however, a disturbance in the jet impingement was observed, leading to the least uniformity. The increase in the number of channels also enhanced the uniformity of the flow distribution and, consequently, improved the heat transfer performance, which must be considered to optimize new microchannel heat sink designs. The achieved optimized design for a heat sink, with microchannels for nanofluid flow and a higher heat dissipation rate, comprised a rectangular collector with eight microchannels and vertical placement of the inlet and outlet.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.