No abstract

The 12 January 2010 Mw 7.0 earthquake in the Republic of Haiti caused an estimated 300,000 deaths, displaced more than a million people, and damaged nearly half of all structures in the epicentral area. We provide an overview of the historical, seismological, geotechnical, structural, lifeline-related, and socioeconomic factors that contributed to the catastrophe. We also describe some of the many challenges that must be overcome to enable Haiti to recover from this event. Detailed analyses of these issues are presented in other papers in this volume.

The 22 February 2011, Mw6.2-6.3 Christchurch earthquake is the most costly earthquake to affect New Zealand, causing 181 fatalities and severely damaging thousands of residential and commercial buildings, and most of the city lifelines and infrastructure. This manuscript presents an overview of observed geotechnical aspects of this earthquake as well as some of the completed and on-going research investigations. A unique aspect, which is particularly emphasized, is the severity and spatial extent of liquefaction occurring in native soils. Overall, both the spatial extent and severity of liquefaction in the city was greater than in the preceding 4th September 2010 Darfield earthquake, including numerous areas that liquefied in both events. Liquefaction and lateral spreading, variable over both large and short spatial scales, affected commercial structures in the Central Business District (CBD) in a variety of ways including: total and differential settlements and tilting; punching settlements of structures with shallow foundations; differential movements of components of complex structures; and interaction of adjacent structures via common foundation soils. Liquefaction was most severe in residential areas located to the east of the CBD as a result of stronger ground shaking due to the proximity to the causative fault, a high water table approximately 1m from the surface, and soils with composition and states of high susceptibility and potential for liquefaction. Total and differential settlements, and lateral movements, due to liquefaction and lateral spreading is estimated to have severely compromised 15,000 residential structures, the majority of which otherwise sustained only minor to moderate damage directly due to inertial loading from ground shaking. Liquefaction also had a profound effect on lifelines and other infrastructure, particularly bridge structures, and underground services. Minor damage was also observed at flood stop banks to the north of the city, which were more severely impacted in the 4th September 2010 Darfield earthquake. Due to the large high-frequency ground motion in the Port hills numerous rock falls and landslides also occurred, resulting in several fatalities and rendering some residential areas uninhabitable.

Although in recent years surface wave methods have undergone significant development that has greatly enhanced their capabilities, little effort has been spent to determine the uncertainty associated with surface wave measurements. The objective of this study is to determine how the uncertainty of the experimental data is mapped into the uncertainty of the shear wave velocity profile via the inversion algorithm. The methodology developed in this study for estimating the uncertainty of the shear wave velocity profile from surface wave measurements is based on the assumption that the experimental data are normally distributed. The validity of this hypothesis was experimentally verified using data gathered at two sites in Italy where surface wave tests were performed using linear arrays of multiple receivers. The experimental dispersion curve measured at the site was subsequently inverted to obtain the expected shear wave velocity profile together with an estimate of the associated standard deviation. The final results show that uncorrelated noise has a very little influence on multistation surface wave tests, confirming their robustness for applications in noisy environments.