In this review work, the recent progress made in the use of nanofluids (NFs) applied in three specific areas will be presented: machining, solar energy, and biomedical engineering. Within this context, the discussions will be guided by emphasizing the thermal and stability properties of these fluids. In machining, NFs play a prominent role in the processes of turning, milling, drilling, and grinding, being responsible for their optimization as well as improving the useful life of the tools and reducing costs. In the solar energy field, NFs have been used in the thermal management of the panels, controlling and homogenizing the operating temperature of these systems. In the biomedical area, the advantages of using NFs come from the treatment of cancer cells, the development of vaccines before the improvement of diagnostic imaging, and many others. In all lines of research mentioned in this study, the main parameters that have limited or encouraged the use of these fluids are also identified and debated. Finally, the discussions presented in this review will inspire and guide researchers in developing new techniques to improve the applications of NFs in several fields.

In the present work, an analysis of different welding parameters was carried out on the welding of stainless-steel thin thickness tubes by the Gas Metal Arc Welding (GMAW) process. The influence of three main parameters, welding voltage, movement angle, and welding current in the quality of the welds, was studied through a specifically designed experimental process based on the establishment of three different levels of values for each of these parameters. Weld quality is evaluated using destructive testing (macrographic analysis). Specifically, the width and root penetration of the weld bead were measured; however, some samples have been disregarded due to welding defects outside the permissible range or caused by excessive melting of the base metals. Data are interpreted, discussed, and analyzed using the Taguchi method and ANOVA analysis. From the analysis of variance, it was possible to identify the most influential parameter, the welding voltage, with a contribution of 43.55% for the welding penetration and 75.26% for the bead width, which should be considered in the designs of automatic welding processes to improve the quality of final welds.

Vegetable oils have been used as metalworking fluids (MWFs) for many years, particularly in small-scale metalworking operations and in industries where environmental regulations are strict. Before the development of modern MWFs, vegetable oils were one of the most common lubricants used for metalworking tools. The use of vegetable oils can be traced back to ancient civilizations such as Egypt, Greece, and Rome, where olive oil was commonly used to lubricate metal tools and weapons. Today, vegetable oils are used as MWFs in a variety of applications. They are often combined with additives or nanoparticles to enhance their performance, such as improving the lubricity, cooling properties, and stability of the oil, as well as reducing friction and wear on the cutting tool. Additives, such as antioxidants, anti-wear agents, and extreme pressure (EP) additives, can be used to improve the performance of vegetable oils as cutting fluids. Compared to standard MWFs, vegetable oils are generally more biodegradable and environmentally friendly, and can be more cost-effective. However, MWFs may offer superior performance in certain areas, such as lubrication and cooling. Ultimately, the choice of MWFs will depend on the specific requirements of the metalworking operation and the balance between performance, cost, and environmental considerations. As the demand for sustainability and environmental responsibility continues, the use of vegetable oils as MWFs is likely to become even more popular in the future. Overall, vegetable oils offer a viable and potentially attractive alternative to standard MWFs in certain applications. This review highlights both conventional and most recent advances in vegetal oils frequently used as lubricant fluids in manufacturing processes.

This paper presents a characterization processes study of metallic alloys, more specifically the shape memory alloys (SMA) composed by Nickel and Titanium (NiTinol). Two different wire suppliers were studied, starting with metallographic analysis until observe the contours of the grain wires. Differential scanning calorimetry (DSC) test was also performed to obtain phase transformation temperatures of the NiTinol alloys. Finally, after several tensile tests, some results were obtained for stresses, strains, elasticity modules and maximum rupture deformation.