In order to take up some challenges in metal forming coming from the recent environmental stakes, Electromagnetic Forming and Electro-Hydraulic Forming processes have been developed at the industrial scale, using the advantages of high strain rates. Such progress has been possible in particular thanks to the emergence of strongly coupled simulation tools. In this article, some examples have been selected from some industrial applications in deep forming, postforming, embossing, and complex shapes forming. It shows how in particular, the increase in formability can bring benefits to solve customer issues in the automotive, luxury packaging, aeronautic, and particles accelerator sectors. Some simulation results are presented to explain how this highly dynamic forming occurs for each of these applications.
The forming limit diagram of high-purity niobium sheets used for the manufacturing of superconducting radiofrequency (SRF) cavities is presented. The Marciniak (in-plane) test was used with niobium blanks with a thickness of 1 mm and blank carriers of annealed oxygen-free electronic copper. A high formability was measured, with an approximate true major strain at necking for plane-strain of 0.441. The high formability of high-purity niobium is likely caused by its high strain rate sensitivity of 0.112. Plastic strain anisotropies (r-values) of 1.66, 1.00, and 2.30 were measured in the 0°, 45°, and 90° directions. However, stress–strain curves at a nominal strain rate of ~10−3 s−1 showed similar mechanical properties in the three directions. Theoretical calculations of the forming limit curves (FLCs) were conducted using an analytical two-zone model. The obtained results indicate that the anisotropy and strain rate sensitivity of niobium affect its formability. The model was used to investigate the influence of strain rate on strains at necking. The obtained results suggest that the use of high-speed sheet forming should further increase the formability of niobium.
The design of processes like magnetic pulse forming and electrohydraulic forming involves multiphysical couplings that require numerical simulation, and knowledge on dynamic behaviour of metals. The forming process is completed in about 100 μs, so that the workpiece material deforms at strain-rates between 100 and 10 000 s-1. In this range, the mechanical behaviour can be significantly different than that in quasi-static conditions. It is often noticed that the strength and the formability are higher.
The main goal of this study is to use an electromagnetically driven test on tubes or sheets to identify the constitutive behaviour of the workpiece material. In the case of tube, an industrial helix coil is used as inductor. Simulations with the code LS-Dyna® permit to find a configuration where the tube deforms homogeneously enough to allow axisymmetric modelling of the setup. The coil current is measured and used as an input for the simulations. The radial expansion velocity is measured with a Photon Doppler Velocimeter.
The parameter identification is lead with the optimization software LS-Opt®. LS-Dyna axisymmetric simulations are launched which different set of parameters for the constitutive behaviour, until the computed expansion velocity fits the experimental velocity. The optimization algorithm couples a gradient method and a global method to avoid local minima. Numerical studies show that for the Johnson-Cook constitutive model, two or three experiments at different energies are required to identify the expected parameters.
The method is applied to Al1050 tubes, as received and annealed. The parameters for the Johnson-Cook and Zerilli-Armstrong models are identified. The dynamic constitutive behaviour is compared to that measured on quasi-static tensile tests, and exhibits a strong sensitivity to strain-rate. The final strains are also significantly higher at high velocity, which is one of the major advantages of this kind of processes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.