Jabon (Anthocephalus cadamba) is a fast-growing wood with low quality due to its low density and strength. The quality can be increased by modifying the wood through impregnation with various chemical compounds. In this study, jabon was impregnated with a solution of Fe and immersed in a strong base (NaOH) or a weak base (NH4OH) to form magnetite (Fe3O4) in-situ. This study analysed the use of NaOH and NH4OH in synthesising magnetic jabon wood and evaluated the wood’s characteristics. The impregnation process began with a vacuum of −0.5 bar for 0.5 h and then a pressure of 1 bar for 2 h. The samples subsequently underwent assessment of their dimensional stability, density, and characteristics. The results showed that impregnation with Fe solution followed by NaOH or NH4OH significantly affected the density and dimensional stability of the wood. The polymer weight gain was higher with NaOH, while the anti-swelling efficiency was higher with NH4OH. The density and bulking effect were increased, but the water uptake was decreased. Fourier transform infrared analysis showed the successful synthesis of magnetite. Scanning electron microscopy–energy-dispersive X-ray spectroscopy analysis revealed that magnetite covered the vessel fibre cell walls, and vibrating sample magnetometry analysis showed significant magnetic properties of the wood.
Abstract. Rahayu I, Laksono GD, Darmawan W, Maddu A, Prihatini E. 2021. Demarcation area between juvenile and mature wood in Elaeocarpus angustifolius. Biodiversitas 22: 2583-2590. Wood for use in building and industrial materials is generally supplied from plantations and natural forests. Timber demand has been increasing as the population grows, but the availability of timber from natural forests is declining. Therefore, to meet timber needs, wood from community forests is becoming a solution. Community forests are widely planted with fast-growing trees, such as Elaeocarpus angustifolius Blume. It offers the advantages of a short cutting cycle and large-diameter wood. This study aimed to determine the demarcation area between juvenile and mature wood on 6-year-old E. angustifolius based on anatomical, physical, and mechanical properties. The parameters used to determine the demarcation area included the following properties: anatomical (fiber length, cell wall thickness, and microfibril angle [MFA]), physical (moisture content and green density), and mechanical (modulus of elasticity [MOE], modulus of rupture [MOR], and hardness). Those parameters were measured from pith to bark. Data analyses were based on segmented linear regression models using PROC NLIN in SAS. Fiber length, cell wall thickness, green density, MOE, MOR, and hardness values increased from pith to bark. Results from the segmented linear regression models on anatomical properties allowed extrapolating that mature wood would begin at the 18 cm (based on fiber length), the 20 cm (based on cell wall thickness), and the 21 cm (based on MFA) distance from the pith. the proportion of juvenile wood in E. angustifolius was 100%. Fiber length, cell wall thickness, and MFA can be used to determine the transition point of juvenile wood and mature wood in E. angustifolius.
Mangium (Acacia mangium Willd.) is a fast-growing wood that is widely grown in Indonesia. The impregnation method is needed to improve the qualities of the wood. In this study, TiO2 nanoparticle (79.17 nm) was produced using the hydrothermal method. The purpose of this study was to analyze the effect of TiO2 nanoparticle impregnation on the density and dimensional stability of mangium and the effectiveness of the presence of TiO2 nanoparticle in wood in degrading pollutants. The mangium samples (2 cm × 2 cm × 2 cm) were placed inside impregnation tube. The impregnation solutions included water (untreated), 1% TiO2 nanoparticle, and 5% TiO2 nanoparticles. The samples were analyzed for density, weight percent gain (WPG) dan bulking effect (BE). Samples were also analyzed by X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). TiO2 nanoparticle resulted in an increase in density, WPG, and BE-treated mangium. Based on XRD and FTIR results, TiO2 nanoparticle was successfully impregnated into mangium wood. Scanning electron microscopy–energy-dispersive X-ray spectroscopy analysis indicated that TiO2 nanoparticle covered the surface of the wood cells. The TiO2-impregnated mangium wood has a higher photocatalyst activity than untreated, indicating better protection from UV radiation and pollutants.
Indonesia cultivates many types of fast-growing wood to overcome the shortage of raw materials and meet the needs of its population. Sengon (Falcataria moluccana Miq.) is a fast-growing wood species widely planted in Indonesia. Sengon wood is a light wood having a specific gravity of 0.33, ranging between 0.24-0.49, and belongs to the strength class IV-V and durability class IV-V (Martawijaya et al., 2005). Typically, sengon wood is typically used as a raw material for making wood crates, particleboards, fiberboards, matches, and handicrafts. The productivity of fast-growing wood is high, but it has several problems, especially those related to physical properties and others (Priadi et al., 2019). Bowyer et al. (2007) stated that fast-growing wood has
Ganitri (Elaeocarpus sphaericus (Gaertn.) K. Schum.) and jabon (Anthocephalus cadamba) are fast-growing wood species that have low strength and durability class. One of methods for improving the characteristics of ganitri and jabon woods is impregnation. This study objectives were to analyze the effect of impregnation of Melamine Formaldehyde Furfuryl Alcohol (MFFA) copolymer and 0.5% Nano-SiO2 on the physical, mechanical and durability properties of ganitri and jabon woods. The impregnation process was carried out by applying a 0.5 bar vacuum for 1 hour and followed by 2 bar pressure for 2 hours. The results showed that impregnation with MFFA and Nano-SiO2 could improve optimally the physical and mechanical properties and durability of fast-growing woods
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.