Tissue engineering is an important emerging area for creating biological alternatives for harvested tissues, implants, and prostheses. Biocompatible and biodegradable polymeric materials are considered an important class of materials that can be used as scaffolds in tissue engineering applications. In this work, the system studied was nanocomposites of hydroxyapatite (HA) dispersed in a matrix of PLLA. Scaffolds have to present similar structure and also function as an artificial extracellular matrix for cell attachment and growth. Hydroxyapatite is a bioactive ceramic and has been used in applications of repairing bone tissue due to its biocompatibility and osteoconductivity. Poly(L- lactic acid) is a biodegradable and biocompatible polymer and has been used in different applications in the biomedical field. In this work, polymer solutions were prepared with different percentages of hydroxyapatite and porous membranes consisting of non-woven nanostructured fibers were obtained by electrospinning. The process parameters were: voltage of 13kV, flow rate of 0.5 ml/h and distance from the tip of the needle to the collector of 12 cm. By using these process parameter, fibrous membranes were obtained with different concentrations of HA (1.96, 4.76, 9 [wt %]). The morphology of the samples was observed by SEM and the characteristic physic-chemical were analyzed by XRF, XRD, DSC and FTIR.
Poly(vinyl alcohol) (PVA) is a biomaterial that has interesting features for applications in soft tissue replacement due to its similarities in the mechanical properties of such tissues. This paper describes the preparation and characterization of PVA fibers obtained by electrospinning and crosslinked with potassium persulfate as thermoinitiator. These PVA fibers were characterized by Scanning Electron Microscopy (SEM) and Optical Microscopy (OM) to analyze the morphology of the spun samples. Finally, Fourier Transform Infrared Spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed and the results showed that the biomaterial was partially cross-linked, which indicates a potential use for dermal regeneration applications. The morphology of the fibers indicated that structural changes occurred in the biomaterial after thermal crosslinking.
In bone tissue engineering, synthetic scaffolds are commonly used and this should present the following requirements; (i) recapitulate the native three-dimensional (3D) hierarchical fibrous structure, (ii) possess biomimetic surface properties and (iii) demonstrate mechanical integrity. However, some methods of producing scaffolds do not achieve these requirements. The present study aims the application of a composite of poly (L-lactic acid) (PLLA) and Hydroxyapatite (HA) produced by rotary jet spinning, which can be used to obtain scaffolds that meet the above requirements with affordable costs (regarding materials and production). The morphology and thermal properties of the scaffolds were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). For the in vivo tests, 20 Wistar rats, distributed into two groups, in which critical defects were performed in cranial calotte were used. Then scaffolds of PLLA/HA were implanted and compared with the control group that didn’t receive the implant. The results have shown that in the cases where only the defects in cranial caps were performed, bone healing did not occur. In cases where the scaffolds of PLLA/HA were used, rich neovascularization was noted, accompanied by foreign body type reaction and presence of reactive bone around the implants. The evaluation of PLLA/HA scaffolds used in the rat calvarial defect model, according to the criteria surveyed was favorable, showed the implants insurance and that they are suitable materials to be used as substitutes of calvarial bone tissue in these animals.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.