No abstract

Two types of synchrotron radiation computed tomography (SR‐CT)—projection CT (micro‐CT) and phase‐contrast imaging CT (nano‐CT)—were used to observe internal fatigue cracks in (α + β) Ti‐6Al‐4V alloy. Micro‐CT detected cracks in the specimen at ~1 μm spatial resolution, and the nano‐CT provided magnified images at ~200 nm spatial resolution. The crack initiation sites were clarified as the α‐phase for both the surface and internal cracks; however, their opening behaviors differed. A sharp crack tip was observed in the surface crack, and the crack tip opening displacement (CTOD) increased with an increase in the applied load. By contrast, a blunted crack tip, similar to that of a crack in a vacuum, was observed for the internal crack, and its CTOD remained almost constant regardless of the applied load. These phenomena are likely to explain the different behaviors of surface and internal cracks, particularly the slower growth rate of internal cracks, which leads to a longer fatigue life in the very high cycle fatigue regime.

No abstract

Uniaxial fatigue tests were conducted for a β titanium alloy Ti-22V-4Al up to a very high cycle fatigue (VHCF) regime. The initiation and propagation processes of the internal fatigue cracks were investigated using 3D fractographic analysis. Multiple facets were observed at the crack initiation site. Three facet initiation models were proposed based on the surface appearances and the 3D facet bonding patterns of the multiple facets, and the major facet was determined to be the true crack initiation site. Using the size of the major facet, a Tanaka–Akiniwa model, which can determine the material constants for the Paris law using only conventional fatigue tests, was applied to reveal the propagation process of the internal cracks. A reverse fatigue life prediction was also conducted to evaluate the accuracy of the material constants obtained using the Tanaka–Akiniwa model. When the facet initiation models were applied, the predictions showed less deviation and better agreement than when the facet initiation process was not considered. The findings of this study indicate that the formation of multiple facets in β titanium alloys is sequential rather than simultaneous.

No abstract