Ni/Li exchange (disordering) usually happens in layered Li(NiMnCo)O (NMC) materials and affects the performance of the material in lithium-ion batteries. Most of previous studies attributed this phenomenon to the similar size of Ni and Li, which implies that Ni should be more favorable than Ni to be located at Li 3b sites in the Li slab. However, this theory cannot explain why in Ni-rich NMC materials where most Ni cations are Ni, Ni/Li exchange happens even more frequently. Using extensive ab initio calculations combined with experiments, here we report that a superexchange interaction between transition metals plays a dominating role in tuning the Ni/Li disordering in NMC materials. Under this scheme, we also propose a new charge compensation mechanism that describes that after Ni/Li exchange the nearest Co transforms to Co in Ni-rich NMC materials. On the basis of this theory, the existence of Co in the initial Ni-rich NMC samples was predicted for the first time, which was further confirmed by our synchrotron-based soft X-ray absorption spectroscopy.

Metal (M) oxides are one of the most interesting and widely used solids, and many of their properties can be directly correlated to the local structural ordering within basic building units (BBUs). One particular example is the high-Ni transition metal layered oxides, potential cathode materials for Li-ion batteries whose electrochemical activity is largely determined by the cationic ordering in octahedra (e.g., the BBUs in such systems). Yet to be firmly established is how the BBUs are inherited from precursors and subsequently evolve into the desired ordering during synthesis. Herein, a multimodal in situ X-ray characterization approach is employed to investigate the synthesis process in preparing LiNiMnCoO from its hydroxide counterpart, at scales varying from the long-range to local individual octahedral units. Real-time observation corroborated by first-principles calculations reveals a topotactic transformation throughout the entire process, during which the layered framework is retained; however, due to preferential oxidation of Co and Mn over Ni, significant changes happen locally within NiO octahedra. Specifically, oxygen loss and the associated symmetry breaking occur in NiO; as a consequence, Ni ions become highly mobile and tend to mix with Li, causing high cationic disordering upon formation of the layered oxides. Only through high-temperature heat treatment, Ni is further oxidized, thereby inducing symmetry reconstruction and, concomitantly, cationic ordering within NiO octahedra. Findings from this study shed light on designing high-Ni layered oxide cathodes and, more broadly, various functional materials through synthetic control of the constituent BBUs.

The chemical processes occurring on the surface of cathode materials during battery cycling play a crucial role in determining battery's performance. However, the understanding of such surface chemistry is far from clear due to the complexity of redox chemistry during battery charge/discharge. Through intensive aberration corrected STEM investigation on ten layered oxide cathode materials, two important findings on the pristine oxides are reported. First, Ni and Co show strong plane selectivity when building up their respective surface segregation layers (SSLs). Specifically, Ni‐SSL is exclusively developed on (200)m facet in Li–Mn‐rich oxides (monoclinic C2/m symmetry) and on (012)h facet in Mn–Ni equally rich oxides (hexagonal R‐3m symmetry), while Co‐SSL has a strong preference to (20−2)m plane with minimal Co‐SSL also developed on some other planes in Li–Mn‐rich cathodes. Structurally, Ni‐SSLs tend to form spinel‐like lattice while Co‐SSLs are in a rock‐salt‐like structure. Second, by increasing Ni concentration in these layered oxides, Ni and Co SSLs can be suppressed and even eliminated. The findings indicate that Ni and Co SSLs are tunable through controlling particle morphology and oxide composition, which opens up a new way for future rational design and synthesis of cathode materials.

In layered LiNixMnyCozO2 cathode material for lithium-ion batteries, the spins of transition metal (TM) ions construct a two-dimensional triangular networks, which can be considered as a simple case of geometrical frustration. By performing neutron powder diffraction experiments and magnetization measurements, we find that long-range magnetic order cannot be established in LiNixMnyCozO2 even at low temperature of 3 K. Remarkably, the frustration parameters of these compounds are estimated to be larger than 30, indicating the existence of strongly frustrated magnetic interactions between spins of TM ions. As frustration will inevitably give rise to lattice instability, the formation of Li/Ni exchange in LiNixMnyCozO2 will help to partially relieve the degeneracy of the frustrated magnetic lattice by forming a stable antiferromagnetic state in hexagonal sublattice with nonmagnetic ions located in centers of the hexagons. Moreover, Li/Ni exchange will introduce 180°s uperexchange interaction, which further relieves the magnetic frustration through bringing in new exchange paths. Thus, the variation of Li/Ni exchange ratio vs. TM mole fraction in

No abstract

A recent discovery of anionic redox activity in Li-rich layered compounds opens a new direction for the design of high-capacity cathode materials for lithium-ion batteries. Here using extensive ab initio calculations, the thermodynamic existence of the Li-rich phase in LiFePO4 to form Li1+xFe1-xPO4 with x not exceeding 12.5% has been proved. Anionic redox activity and structural stability during delithiation are further investigated. Interestingly, it is found that Li1+xFe1-xPO4 cannot be delithiated completely and thus cannot achieve extra capacity by anionic redox activity, because the local oxygen-ion redox will cause the fracture of the rigid framework formed by phosphate tetrahedral polyanions. Although an extra capacity cannot be realized, the excess Li-ions at Fe sites can enhance the Li-ion diffusivity along the adjacent [010] channel and contribute to the shift from 1D to 2D/3D diffusion. This study provides a fresh perspective on olivine-type LiFePO4 and offers some important clues on designing Li-rich cathode materials with high energy density.

The discovery of anion redox activity is promising for boosting the capacity of lithium-ion battery (LIB) cathodes. However, fundamental understanding of the mechanisms that trigger the anionic redox is still lacking. Here, using hybrid density functional study combined with experimental soft X-ray absorption spectroscopy (sXAS) measurements, we unambiguously proved thata widely-studied cathode material for LIBs, performs sequent cationic and anionic redox activity through delithiation. Specifically, Fe 2+ is oxidized to Fe 3+ during the first Li-ion extraction per formula unit (f.u.), while the second Li-ion extraction triggered the oxygen redox exclusively. The transition between cationic and anionic redox activities happens exactly at LiFeSiO 4 , with electron and hole polaronic behaviors, respectively. For other polyanionic transition-metal (TM) materials in this family, while Li 2 NiSiO 4 shows similar sequent redox activity as Li 2 FeSiO 4 , Li 2 MnSiO 4 shows the multiple cationic redox (Mn 2+ -Mn 4+ ) during the whole delithiation, and Li 2 CoSiO 4 shows a simultaneous cationic and anionic redox. The present finding not only provides new insights into the oxygen redox activity in polyanionic compounds for rechargeable batteries, but also sheds light on the future design of high-capacity rechargeable batteries. 2 3

No abstract