No abstract

No abstract

In Wireless Sensor Networks which are deployed in remote and isolated tropical areas; such as forest; jungle; and open dirt road environments; wireless communications usually suffer heavily because of the environmental effects on vegetation; terrain; low antenna height; and distance. Therefore; to solve this problem; the Wireless Sensor Network communication links must be designed for their best performance using the suitable electromagnetic wave behavior model in a given environment. This study introduces and analyzes the behavior of the LoRa pathloss propagation model for signals that propagate at near ground or that have low transmitter and receiver antenna heights from the ground (less than 30 cm antenna height). Using RMSE and MAE statistical analysis tools; we validate the developed model results. The developed Fuzzy ANFIS model achieves the lowest RMSE score of 0.88 at 433 MHz and the lowest MAE score of 1.61 at 433 MHz for both open dirt road environments. The Optimized FITU-R Near Ground model achieved the lowest RMSE score of 4.08 at 868 MHz for the forest environment and lowest MAE score of 14.84 at 868 MHz for the open dirt road environment. The Okumura-Hata model achieved the lowest RMSE score of 6.32 at 868 MHz and the lowest MAE score of 26.12 at 868 MHz for both forest environments. Finally; the ITU-R Maximum Attenuation Free Space model achieved the lowest RMSE score of 9.58 at 868 MHz for the forest environment and the lowest MAE score of 38.48 at 868 MHz for the jungle environment. These values indicate that the proposed Fuzzy ANFIS pathloss model has the best performance in near ground propagation for all environments compared to other benchmark models

In this modern age, Internet of Things (IoT) and Wireless Sensor Network (WSN) as its derivatives have become one of the most popular and important technological advancements. In IoT, all things and services in the real world are digitalized and it continues to grow exponentially every year. This growth in number of IoT device in the end has created a tremendous amount of data and new data services such as big data systems. These new technologies can be managed to produce additional value to the existing business model. It also can provide a forecasting service and is capable to produce decision-making support using computational intelligence methods. In this survey paper, we provide detailed research activities concerning Computational Intelligence methods application in IoT WSN. To build a good understanding, in this paper we also present various challenges and issues for Computational Intelligence in IoT WSN. In the last presentation, we discuss the future direction of Computational Intelligence applications in IoT WSN such as Self-Organizing Network (dynamic network) concept.

One of the technologies that has wireless application nowadays was 5G mobile communication.This paper presents the designing of a Tri-band microstrip antenna for targeting 5G broadband communications,This element antenna has 3x3 rectangular patches with feeding line structures are branched. With the use of double feeding proximity coupling structure, we intend to maximize antenna bandwidth, therefore the antenna cover range tri-band frequency from 40 GHz to 70 GHz. The reflection factor comparation between simulation and measurement has a minimum with respective frequency at 45.3 GHz, 57 GHz, and 66 GHz. The total measurement bandwith 11.5 Ghz. With this combination tecnique, the proposed antenna is a promising candidate for 5G communication systems.

Palm oil is the main cash crop of tropical Asia, and the implementation of LPWAN (low-power wide-area network) technologies for smart agriculture applications in palm oil plantations will benefit the palm oil industry in terms of making more revenue. This research attempts to characterize the LoRa 433 MHz frequency channels for the available spreading factors (SF7-SF12) and bandwidths (125 kHz, 250 kHz, and 500 kHz) for wireless sensor networks. The LoRa channel modeling in terms of path-loss calculation uses empirical measurements of RSS (received signal strength) in a palm oil plantation located in Selangor, Malaysia. In this research, about 1500 LoS (line-of-sight) and 300 NLoS (non-line-of-sight) propagation measurement data are collected for path-loss prediction modeling. Using the empirical data, a prediction model is constructed. The path-loss exponent for LoS propagation of the proposed prediction model is found to be 2.34 and 2.9 for 125–250 kHz bandwidth and 500 kHz bandwidth, respectively. Again, for the NLoS propagation links, the attenuation per trunk is found to be 7.58 dB, 7.04 dB, 5.35 dB, 5.02 dB, 5.01 dB, and 5 dB for SF7-SF12, and the attenuation per canopy is found to be 9.32 dB, 7.96 dB, 6.2 dB, 5.89 dB, 5.79 dB, and 5.45 dB for SF7-SF12. Moreover, the prediction model is found to be the better choice (mean RMSE 2.74 dB) in comparison to the empirical foliage loss models (Weissberger’s and ITU-R) to predict the path loss in palm oil plantations.

No abstract

Flood is still a problem that always been a mayor obstacle in several big cities in Indonesia such as DKI Jakarta. If the rainfall so high and river can be accommodate the rainfall, there will be flooding. So that river water doesn’t overflow, it is necessary to make a floodgate in the river flow. One of the previous studies that has been carried out regarding the control and monitoring of water dam gates is researched by Fahruddin. 2014 from the Faculty of Science and Technology, Makassar State Islamic University: Describes the design of a device capable of monitoring the height of water activity in the reservoir and controlling the floodgates automatically according to the height of water activity. The research that the writer is currently carrying out is the design method which consists of a series of sensors, NodeMCU microcontrollers, and Stepper Motors. The workflow of this system is when the water rises or falls, it send a signal to the sensor. And then the signal will be input for the microcontroller which is then processed to turn on the motor, so that it can open or close the floodgates, and send information to the indicator screen and Telegram application. After the experiment is carried out, it can be said that the system can work properly, namely when the ultrasonic sensor experiment, it was found that the sensor has been sent an output signal that was in accordance with the water level in actual condition. Based on testing using the fuzzy method, it was found that opening value at the floodgate obtained during the test had an average accuracy rate of 91% with an error difference of 9%.