Temperature is a ubiquitous environmental variable used to explore materials structure, properties and reactivity. This article reports a new paradigm for variable-temperature measurements that varies the temperature continuously across a sample such that temperature is measured as a function of sample position and not time. The gradient approach offers advantages over conventional variable-temperature studies, in which temperature is scanned during a series measurement, in that it improves the efficiency with which a series of temperatures can be probed and it allows the sample evolution at multiple temperatures to be measured in parallel to resolve kinetic and thermodynamic effects. Applied to treat samples at a continuum of temperatures prior to measurements at ambient temperature, the gradient approach enables parametric studies of recovered systems, eliminating temperaturedependent structural and chemical variations to simplify interpretation of the data. The implementation of spatially resolved variable-temperature measurements presented here is based on a gradient-heater design that uses a 3Dprinted ceramic template to guide the variable pitch of the wire in a resistively heated wire-wound heater element. The configuration of the gradient heater was refined on the basis of thermal modelling. Applications of the gradient heater to quantify thermal-expansion behaviour, to map metastable polymorphs recovered to ambient temperature, and to monitor the time-and temperaturedependent phase evolution in a complex solid-state reaction are demonstrated.

Lithium-rich nickel manganese cobalt oxide (LRNMC) is being explored as an alternative to stoichiometric nickel manganese cobalt oxide (NMC) cathode materials due to its higher, initially accessible, energy-storage capacity. This higher capacity has been associated with reversible O oxidation; however, the mechanism through which the change in O chemistry is accommodated by the surrounding cathode structure remains incomplete, making it challenging to design strategies to mitigate poor electrode performance resulting from extended cycling. Focusing on LRNMC cathodes, we identify nanoscale domains of lower electron density within the cathode as a structural consequence of O oxidation using small-angle X-ray scattering (SAXS) and operando X-ray diffraction (XRD). A feature observed in the small angle scattering region suggests the formation of nanopores, which first appears during O oxidation, and is partially reversible. This feature is not present in traditional cathode materials, including stoichiometric NMC and lithium nickel cobalt aluminum oxide (NCA) but appears to be common to other Li-rich systems tested here

Synthesis parameters, storage conditions, and electrolyte chemistry are all critical parameters limiting the cycling performances of disordered rock salt cathodes.

Platinum is state-of-the-art for fast electron transfer whereas carbon electrodes, which have semimetal electronic character, typically exhibit slow electron-transfer kinetics. But when we turn to practical electrochemical devices, we turn to carbon. To move energy devices and electro(bio)analytical measurements to a new performance curve requires improved electron-transfer rates at carbon. We approach this challenge with electroless deposition of disordered, nanoscopic anhydrous ruthenium oxide at pyrolytic carbon prepared by thermal decomposition of benzene (RuOx@CVD-C). We assessed traditionally fast, chloride-assisted ([Fe(CN)]) and notoriously slow ([Fe(HO)]) electron-transfer redox probes at CVD-C and RuOx@CVD-C electrodes and calculated standard heterogeneous rate constants as a function of heat treatment to crystallize the disordered RuOx domains to their rutile form. For the fast electron-transfer probe, [Fe(CN)], the rate increases by 34× over CVD-C once the RuOx is calcined to form crystalline rutile RuO. For the classically outer-sphere [Fe(HO)], electron-transfer rates increase by an even greater degree over CVD-C (55×). The standard heterogeneous rate constant for each probe approaches that observed at Pt but does so using only minimal loadings of RuOx.

Countless inorganic materials are prepared via high temperature solid-state reaction of mixtures of reagents powders. Understanding and controlling the phenomena that limit these solid-state reactions is crucial to designing reactions for new materials synthesis. Here, focusing on topotactic ion-exchange between NaFeO 2 and LiBr as a model reaction, we manipulate the mesoscale reaction architecture and transport pathways by changing the packing and interfacial contact between reagent particles. Through analysis of in situ synchrotron X-ray diffraction data, we identify multiple kinetic regimes that reflect transport limitations on different length scales: a fast kinetic regime in the first minutes of the reaction and a slow kinetic regime that follows. The fast kinetic regime dominates the observed reaction progress and depends on the reagent packing; this challenges the view that solid-state reactions are necessarily slow. Using a phase-field model, we simulated the reaction process and showed that particles without direct contact to the other reactant phases experience large reduction in the reaction rate, even when transport hindrance at particle−particle contacts is not considered.

Operando studies that probe how electrochemical reactions propagate through a battery provide valuable feedback for optimizing the electrode architecture and for mitigating reaction heterogeneity. Transmission-geometry depthprofiling measurements carried out with the beam directed parallel to the battery layers -in a radial geometry -can provide quantitative structural insights that resolve depth-dependent reaction heterogeneity which are not accessible from conventional transmission measurements that traverse all battery layers. However, these spatially resolved measurements are susceptible to aberrations that do not affect conventional perpendicular-beam studies. Key practical considerations that can impact the interpretation of synchrotron depthprofiling studies, which are related to the signal-to-noise ratio, cell alignment and lateral heterogeneity, are described. Strategies to enable accurate quantification of state of charge during rapid depth-profiling studies are presented.

To better understand polymorph control in transition metal oxides, the mechanochemical synthesis of NaFeO 2 was explored. Herein, we report the direct synthesis of α-NaFeO 2 through a mechanochemical process. By milling Na 2 O 2 and γ-Fe 2 O 3 for 5 h, α-NaFeO 2 was prepared without high-temperature annealing needed in other synthesis methods. While investigating the mechanochemical synthesis, it was observed that changing the starting precursors and mass of precursors affects the resulting NaFeO 2 structure. Density functional theory calculations on the phase stability of NaFeO 2 phases show that the α phase is stabilized over the β phase in oxidizing environments, which is provided by the oxygen-rich reaction between Na 2 O 2 and Fe 2 O 3 . This provides a possible route to understanding polymorph control in NaFeO 2 . Annealing the as-milled α-NaFeO 2 at 700 °C has resulted in increased crystallinity and structural changes that improved electrochemical performance in terms of capacity over the as-milled sample.

LiVOPO4 is a promising next-generation multi-electron cathode material, boasting a theoretical capacity of 305 mAh/g, significantly higher than any commercially used Li-ion battery cathode material. However, the material still faces...