Unusual specular X-ray diffraction patterns have been observed from certain thin film intergrowths of metal monochalcogenide (MX) and transition metal dichalcogenide (TX2) structures. These patterns exhibit selective “splitting” or broadening of selected (00l) diffraction peaks, while other (00l) reflections remain relatively unaffected [Atkins et al., Chem. Mater. 24, 4594 (2012)]. Using a simplified optical model in the kinematic approximation, we illustrate that these peculiar and somewhat counterintuitive diffraction features can be understood in terms of additional layers of one of the intergrowth components, MX or TX2, interleaved between otherwise “ideal” regions of MX-TX2 intergrowth. The interpretation is in agreement with scanning transmission electron microscope imaging, which reveals the presence of such stacking “defects” in films prepared from non-ideal precursors. In principle, the effect can be employed as a simple, non-destructive laboratory probe to detect and characterize ultrathin layers of one material, e.g., 2-dimensional crystals, embedded between two slabs of a second material, effectively using the two slabs as a highly sensitive interferometer of their separation distance.
<p>In this study, Al-Ni alloy ribbons in hypoeutectic, euctectic and hypereutectic compositions were obtained by melt spinning. The microstructural changes of the samples, from the as-cast to rapid solid-ification processes at different Cu wheel tangential velocities were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The rapid solidification caused <br />morphological transformation of the Al-Al3Ni microstructure from acicular in the as-cast condition to globular in the melt spun ribbons and the growth of the metastable Al9Ni2 intermetallic compound, which acted as reinforcing particles. Due to the increment of the Ni content and the presence of these intermetallic compounds, with size of ~5nm, distributed in the aluminum matrix, the hardness of the alloys significantly increased from the hypoeutectic (90 VHN) to the hypereutectic (205VHN) composition.</p>
The results of database based on the efficiency packed model for metallic glasses. The database contains the atomic radii information as well as elastic properties of the most commonly used alloying elements, permitting composition, packing efficiency and elastic property predictions to be made for binary, ternary and quaternary bulk metallic glasses. Twenty different alloys per system (binary, ternary and quaternary) experimentally reported in the literature were compared with those estimated by the database. Comparison charts and diagrams showed good agreement between the composition predictions and those reported from the experimentally processed metallic glasses. The elastic properties predictions could be used to elaborate Blackman diagrams in order to know, in advance, the intrinsic toughness that the investigated alloys might present. The database is intended for designing bulk metallic glasses. Finally, some quaternary alloys were experimentally produced based on the prediction obtained with the database, showing a glassy phase. The microhardness values obtained experimentally of the Zr
The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy3Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms−1. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe3C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at TN = 43 K. Furthermore, a metamagnetic transition is observed below TN, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔSMpeak of −6.5 (− 2.1) Jkg−1K−1 occurring close to TN with a full-width at half-maximum δTFWHM of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg−1 (estimated from the product |ΔSMpeak| × δTFWHM).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.