More than 130 observation days of the horizontal and vertical extent of Saharan dust intrusions over Europe during the period May 2000 to December 2002 were studied by means of a coordinated lidar network in the frame of the European Aerosol Research Lidar Network (EARLINET). The number of dust events was greatest in late spring, summer, and early autumn periods, mainly in southern (S) and southeastern (SE) Europe. Multiple aerosol dust layers of variable thickness (300–7500 m) were observed. The center of mass of these layers was located in altitudes between 850 and 8000 m. However, the mean thickness of the dust layer typically stayed around 1500–3400 m and the corresponding mean center of mass ranged from 2500 to 6000 m. In exceptional cases, dust aerosols reached northwestern (NW), northern (N), or northeastern (NE) Europe, penetrating the geographical area located between 4°W–28°E (longitude) and 38°N–58°N (latitude). Mean aerosol optical depths (AOD), extinction-to-backscatter ratios (lidar ratios, LR), and linear depolarization ratios of desert aerosols ranged from 0.1 to 0.25 at the wavelength of 355 or 351 nm, 30 to 80 sr at 355 or 351 nm, and 10 to 25% at 532 nm, respectively, within the lofted dust plumes. In these plumes typical Saharan dust backscatter coefficients ranged from 0.5 to 2 Mm−1sr−1. Southern European stations presented higher variability of the LR values and the backscatter-related Ångström exponent values (BRAE) (LR: 20–100 sr; BRAE: −0.5 to 3) than northern ones (LR: 30–80 sr; BRAE: −0.5 to 1)

Abstract. We report on the vertical distributions of Saharan dust aerosols over the N.E. Mediterranean region, which were obtained during a typical dust outbreak on August 2000, by two lidar systems located in Athens and Thessaloniki, Greece, in the frame of the European EARLINET project. MODIS and ground sun spectrophotometric data, as well as air-mass backward trajectories confirmed the existence of Saharan dust in the case examined, which was also successfully forecasted by the DREAM dust model. The lidar data analysis for the period 2000-2002 made possible, for the first time, an estimation of the vertical extent of free tropospheric dust layers [mean values of the aerosol backscatter and extinction coefficients and the extinction-to-backscatter ratio (lidar ratio, LR) at 355 nm], as well as a seasonal distribution of Saharan dust outbreaks over Greece, under cloud-free conditions. A mean value of the lidar ratio at 355 nm was obtained over Athens (53±1 sr) and over Thessaloniki (44±2 sr) during the Saharan dust outbreaks. The corresponding aerosol optical thickness (AOT) at 355 nm, in the altitude range 0-5 km, was 0.69±0.12 and 0.65±0.10 for Athens and Thessaloniki, respectively (within the dust layer the AOT was 0.23 and 0.21, respectively). Air-mass back-trajectory analysis Correspondence to: A. Papayannis (apdlidar@central.ntua.gr) performed in the period 2000-2002 for all Saharan dust outbreaks over the N.E. Mediterranean indicated the main pathways followed by the dust aerosols.

Abstract. We present initial aerosol validation results of the space-borne lidar CALIOP -onboard the CALIPSO satelliteLevel 1 attenuated backscatter coefficient profiles, using coincident observations performed with a ground-based lidar in Athens, Greece (37.9 • N, 23.6 • E). A multi-wavelength ground-based backscatter/Raman lidar system is operating since 2000 at the National Technical University of Athens (NTUA) in the framework of the European Aerosol Research LIdar NETwork (EARLINET), the first lidar network for tropospheric aerosol studies on a continental scale. Since July 2006, a total of 40 coincidental aerosol groundbased lidar measurements were performed over Athens during CALIPSO overpasses. The ground-based measurements were performed each time CALIPSO overpasses the station location within a maximum distance of 100 km. The duration of the ground-based lidar measurements was approximately two hours, centred on the satellite overpass time. From the analysis of the ground-based/satellite correlative lidar measurements, a mean bias of the order of 22% for daytime measurements and of 8% for nighttime measurements with respect to the CALIPSO profiles was found for altitudes between 3 and 10 km. The mean bias becomes much larger for altitudes lower that 3 km (of the order of 60%) which is attributed to the increase of aerosol horizontal inhomogeneity within the Planetary Boundary Layer, resulting to the observation of possibly different air masses by the two instruments. In cases of aerosol layers underlying Cirrus clouds, comparison results for aerosol tropospheric profiles become worse. This is attributed to the significant multiple scattering effects in Cirrus clouds experienced by CALIPSO which result in an attenuation which is less than that measured by the ground-based lidar.

Abstract. In this paper we present a statistical analysis on the geometrical and optical properties of Saharan dust layers observed over Athens, Greece, in a three-year period from 1 January 2004 up to 31 December 2006. The observations of the vertical aerosol profile were performed by the multi-wavelength (355-532-1064-387-607 nm) Raman lidar system of the National Technical University of Athens (NTUA) operated in the city of Athens (37 • 98 N, 23 • 77 E), Greece, in the frame of the European Aerosol Research Lidar Network (EARLINET-ASOS) project. The number of dust events was greatest in late spring, summer, and early autumn periods. This was evident also by aerosol observations during dust outbreaks obtained from the Moderate Resolution Imaging Spectroradiometer (MODIS). In our lidar measurements, multiple aerosol dust layers of variable thickness (680-4800 m) were observed. The center of mass of these layers was located in altitudes between 1600 and 5800 m. However, the mean thickness of the dust layer typically stayed around 2700 m and the corresponding mean center of mass was of the order of 2900 m. The top of the dust layer ranged from 2000 to 8000 m, with a mean value of the order of 4700 m. MODIS observations during dust outbreaks showed that the AOD values at 550 nm ranged between 0.3-0.6, while the corresponding Angström exponent (AE) values were of the order of 0.5-0.65, indicating the presence of rather large particles.

No abstract

Abstract. This study presents an inter-comparison of two active remote sensors (lidar and ceilometer) to determine the mixing layer height and structure of the Planetary Boundary Layer (PBL) and to retrieve tropospheric aerosol vertical profiles over Athens, Greece. This intercomparison was performed under various strongly different aerosol loads/types (urban air pollution, biomass burning and Saharan dust event), implementing two different lidar systems (one portable Raymetrics S.A. lidar system running at 355 nm and one multi-wavelength Raman lidar system running at 355 nm, 532 nm and 1064 nm) and one CL31 Vaisala S.A. ceilometer (running at 910 nm). Spectral conversions of the ceilometer's data were performed using the Angström exponent estimated by ultraviolet multi-filter radiometer (UV-MFR) measurements. The inter-comparison was based on two parameters: the mixing layer height determined by the presence of the suspended aerosols and the attenuated backscatter coefficient. Additionally, radiosonde data were used to derive the PBL height. In general, a good agreement was found between the ceilometer and the lidar techniques in both inter-compared parameters in the height range from 500 m to 5000 m, while the limitations of each instrument are also examined.

Abstract.A strong Saharan dust event that occurred over the city of Athens, Greece (37.9 • N, 23.6 • E) between 27 March and 3 April 2009 was followed by a synergy of three instruments: a 6-wavelength Raman lidar, a CIMEL sun-sky radiometer and the MODIS sensor. The BSC-DREAM model was used to forecast the dust event and to simulate the vertical profiles of the aerosol concentration. Due to mixture of dust particles with low clouds during most of the reported period, the dust event could be followed by the lidar only during the cloud-free day of 2 April 2009. The lidar data obtained were used to retrieve the vertical profile of the optical (extinction and backscatter coefficients) properties of aerosols in the troposphere. The aerosol optical depth (AOD) values derived from the CIMEL ranged from 0.33-0.91 (355 nm) to 0.18-0.60 (532 nm), while the lidar ratio (LR) values retrieved from the Raman lidar ranged within 75-100 sr (355 nm) and 45-75 sr (532 nm). Inside a selected dust layer region, between 1.8 and 3.5 km height, mean LR values were 83 ± 7 and 54 ± 7 sr, at 355 and 532 nm, respectively, while the Angström-backscatter-related (ABR 355/532 ) andÅngström-extinction-related (AER 355/532 ) were found larger than 1 (1.17 ± 0.08 and 1.11 ± 0.02, respectively), indicating mixing of dust with other particles. Additionally, a retrieval technique representing dust as a mixture of spheres and spheroids was used to derive the mean aerosol microphysical properties (mean and effective radius, number, surface and volume density, and mean refractive index) inside the selected atmospheric layers. Thus, the mean value of the retrieved refractive index was found to be 1.49( ± 0.10) + 0.007( ± 0.007)i, and that of the effective radiuses was 0.30 ± 0.18 µm. The final data set of the aerosol optical and microphysical properties along with the water vapor profiles obtained by Raman lidar were incorporated into the ISORROPIA II model to provide a possible aerosol composition consistent with the retrieved refractive index values. Thus, the inferred chemical properties showed 12-40 % of dust content, sulfate composition of 16-60 %, and organic carbon content of 15-64 %, indicating a possible mixing of dust with haze and smoke. PM 10 concentrations levels, PM 10 composition results and SEM-EDX (Scanning Electron Microscope-Energy Dispersive X-ray) analysis results on sizes and mineralogy of particles from samples during the Saharan dust transport event were used to evaluate the retrieval.

Capsule Summary The CROSSINN field experiment investigates the three-dimensional structure of thermally and dynamically driven flows and their impact on the boundary layer in a large Alpine valley using comprehensive state-of-the-art instrumentation.