In the present work, porous gelatin scaffolds were prepared by insufflating an inert gas ( argon) inside a concentrated solution of gelatin in the presence of a suitable polymeric surfactant in association with sodium dodecyl sulfate. The implementation of such an approach involved the design and manufacturing of a specially dedicated reactor. Foams were prepared at a temperature of 50 degrees C and then let gel at 4 degrees C. After purification, they were auto-cross-linked with EDC and freeze-dried. The scaffolds synthesised with this technique present a morphology characterised by pores of spherical symmetry highly interconnected by a plurality of interconnections and, as a consequence, are particularly suited for cell culturing. The dosage of the volume of the insufflated gas permits to modulate the scaffold pore and interconnect dimensions. In this way matrices characterised by void and interconnect average diameters ranging from 250 to 360 mu m and from 80 to 150 mu m, respectively, can be successfully obtained
Tissue engineering is an increasingly expanding area of research in the cardiovascular field that involves engineering, chemistry, biology and medicine. Cardiac tissue engineering (CTE) aims to regenerate myocardial damage by combining cells, matrix, biological active molecules and physiological stimuli. The rationale behind CTE applications is that in order to regenerate the ventricular wall after a myocardial infarction it is necessary to combine procedures that regenerate both cardiomyocytes and the extracellular matrix. The application of (stem) cells together with a matrix could represent an environment protected from the inflammatory and pro-apoptotic signals, a stemness/survival reservoir slowly releasing cells and factors promoting tissue regeneration and angiogenesis. This review will focus on the applications and advantages that CTE application could offer compared to conventional cell therapy.
Many whole cell-based assays in use today rely on flat, two-dimensional (2D) glass or plastic substrates that may not produce results characteristic of in vivo conditions. In this study, a three-dimensional (3D) cell-based assay scaffold was fabricated using a gas-in-foam templating technique. The scaffold was made of poly(vinyl alcohol), a water-soluble synthetic polymer with excellent film-forming, emulsifying, and biocompatible properties widely used in the biomedical field. The preliminary rheological studies on the solution of PVA and surfactant permitted us to disclose the significant physical parameters that influence the morphology of the ensuing materials. The scaffolds obtained were subjected to detailed analysis by light microscopy, Scanning Electron Microscopy (SEM), computed X-ray microtomography (mu CT), infrared spectroscopy, and mechanical testing. Morphological investigations showed that the produced scaffolds are characterised by average void and interconnect diameters lying in the range of 200-300 and 30-150 mu m, respectively, suitable for cell infiltration. Two different cross-linking procedures were adopted in order to modulate the mechanical properties of the PVA scaffolds. One made use of a bi-epoxide (PEGDGE), the other was based on glutaraldehyde (GA). The efficiency in terms of cross-linking density of the two procedures resulted in very different mechanical properties. Furthermore, in this article it is demonstrated how PVA foams can be processed into uniform, porous films suitable to be integrated with multi-well 2D culture plates in order to create a 3D analogue. The PEGDGE cross-linked scaffold was tested on cross-linking cells, a human hepatocyte cell line, representing an appropriate model for liver toxicity studies. Proliferation and cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Typical hepatic functions such as albumin and urea production and induction of Cyp3A4 enzyme activity following drug administration were satisfactory, thus proving the efficiency of this construct in maintaining specific liver functions
Nanodispersions of pristine single-wall carbon nanohorns (i.e., p-SWCNHs) and oxidized-SWCNHs (i.e.; o-SWCNHs) were used to modify screen printed electrode (SPE). p-SWCNHs and o-SWCNHs were fully characterized by using several analytical techniques, as: HR-TEM (High Resolution-Transmission Electron Microscopy), FE-SEM/EDX (Field Emission-Scanning Electron Microscopy/Energy Dispersive X-ray Analysis), Raman spectroscopy, thermogravimetric analysis, differential thermal analysis (DTA), and the Brunauer-Emmett-Teller (BET) method. The chemically modified SPEs were also characterized with Cyclic Voltammetry (CV), using several different electro-active targets. In all cases, p-SWCNHs showed better performances than those obtained for o-SWCNHs as well as with respect to conventional Glassy Carbon (GC) electrodes, in terms of peak currents, significant shift at lower redox-potential ranges and enhanced heterogeneous apparent kinetic constants
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.