No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

Different computer-based simulation models, able to predict the performance of Reverse ElectroDialysis (RED) systems, are currently used to investigate the potentials of alternative designs, to orient experimental activities and to design/optimize prototypes. The simulation approach described here combines a one-dimensional modelling of a RED stack with a fully three-dimensional finite volume modelling of the electrolyte channels, either planar or equipped with different spacers or profiled membranes. An advanced three-dimensional code was used to provide correlations for the friction coefficient (based on 3-D solutions of the continuity and Navier-Stokes equations) and the Sherwood numbers (based on 3-D solutions of a scalar transport equation), as well as to test simple models for the Ohmic resistances (based on 3-D solutions of a Laplace equation for the electrical potential). These results were integrated with empirical correlations for the transport properties of electrolytes and membranes, and were used as the input for the higher scale model. The overall model was validated by comparison with experimental data obtained in laboratory-scale RED stacks under controlled conditions. This combined approach constitutes a fully predictive, potentially very accurate, and still extremely fast-running, tool for the approximate simulation of all the main variables, suitable for performance prediction and optimization studies

Reverse Electrodialysis Heat Engine (REDHE) is a promising technology to convert waste heat at temperatures lower than 100. °C into electric power. In the present work an overview of the possible regeneration methods is presented and the technological challenges for the development of the RED Heat Engine (REDHE) are identified. The potential of this power production cycle was investigated through a simplified mathematical model. In the first part of the work, several salts were singularly modelled as possible solutes in aqueous solutions feeding the RED unit and the corresponding optimal conditions were recognized via an optimization study. In the second part, three different RED Heat Engine scenarios were studied. Results show that power densities much higher than those relevant to NaCl-water solutions can be obtained by using different salts, especially those based on lithium ion (i.e. LiBr and LiCl). Results on the closed loop show efficiencies up to about 15% corresponding to an exergetic efficiency of about 85%, thus suggesting that the RED Heat Engine could potentially be a promising technology, with applications mainly in the industry where low-grade heat that has no alternative use can be converted into electricity